Baldy's Golden Glove Boxer.

[obebaldone1]

Well I have decided to jump head first in to a new sporty build for this year and have begun tearing my other set up down. I got to see first hand some of the things Barry at classicut was doing and was ready to finish up my pack with a boxer build.

Barry had my attention as soon as he started talking about his new transmission design based around the Berg Gears. Im a Berg guy so I was almost sold from that point on. But I didn't want him to know that

So lets start with the heart of the best. This little package is stuffed with the some RC4wd Light weight berg gears and a CCC locker.

[obebaldone1]

Nice little package going on with my HH 35t on 4s. I will be putting this thing to the test.

[BullfrogRC]

I like it you can't go wrong with CCC stuff

[ClassiCutCustoms]

Dang Baldy...... Is this all you have gotten done? I swear it looked close to that when it left here Sunday...... And you have already built two of these....... Better get crackin if you are going to be ready for the 7th comp. Lol

[McTwist]

Chop, chop ... I will be comp day soon.

[McTwist]

Originally Posted by obebaldone1

Well I have decided to jump head first in to a new sporty build for this year and have begun tearing my other set up down. I got to see first hand some of the things Barry at classicut was doing and was ready to finish up my pack with a boxer build.

Barry had my attention as soon as he started talking about his new transmission design based around the Berg Gears. Im a Berg guy so I was almost sold from that point on. But I didn't want him to know that

So lets start with the heart of the best. This little package is stuffed with the some RC4wd Light weight berg gears and a CCC locker.

I ordered up some of those plastic Exceed Max Torque gears for my CCCustoms tranny. I'll let you know how and if they fit. If they don't work I'll be ordering the RC4WD's. I have got to hurry as well we comp on the 14th.

[ClassiCutCustoms]

Oh he has been busy...... Busy talking to his buddies about how excited he is. I have been getting early Christmas wish lists of kits and parts..... Lol

[ClassiCutCustoms]

Originally Posted by McTwist

I ordered up some of those plastic Exceed Max Torque gears for my CCCustoms tranny. I'll let you know how and if they fit. If they don't work I'll be ordering the RC4WD's. I have got to hurry as well we comp on the 14th.

Let us know if they work. Tgreer was just asking me about them but call me old school but I prefer steel in my cases...... Lol

[obebaldone1]

Originally Posted by ClassiCutCustoms

Dang Baldy...... Is this all you have gotten done? I swear it looked close to that when it left here Sunday...... And you have already built two of these....... Better get crackin if you are going to be ready for the 7th comp. Lol

Lol. Between the cold weather and my fingers going numb. It's about all I got. My last work day is tomorrow so I will be cranking up the Heater in the shop and getting her done.

And yes having one already built on the shelf has me a little les stressed. Note I did say a little.

[Vertec]

I heard there was some guy at his shop checking things out that held up progress today

[ClassiCutCustoms]

Originally Posted by Vertec

I heard there was some guy at his shop checking things out that held up progress today

Oh no...... Lol Now who would that have been.... Somebody jonesing?

[McTwist]

Originally Posted by ClassiCutCustoms

Let us know if they work. Tgreer was just asking me about them but call me old school but I prefer steel in my cases...... Lol

Got some original bergs in the tool box just in case. Also have some of the light version v3 berg gears. You know me I just got to try and be a little different. I like those RCBro gears but man that's a lot of frog skins. RCBros $80, RC4WD $50, V1 berg about $50, V3 Berg $25 from amain, exceed $8 plastic $10 steel


Sent from my iPhone using Tapatalk

[obebaldone1]

Originally Posted by Vertec

I heard there was some guy at his shop checking things out that held up progress today

Well I had a little more heat going in the shop today and that some guy stopped by again today . It has been fun having you stop by Justin and we teamed up and made some progress today.


So I got all the cross braces in and ready to try and make it a roller.

[ClassiCutCustoms]

No worries Baldy..... Rumour has it his sweetheart will be gone next week and he will be hanging out over here...... Lol

[obebaldone1]

Im going to use the axels from my last build. The are xr mod with biggins beef tubes. This has been a very reliable set up with loads of steering as most people know by now.

[obebaldone1]

And this boxer is getting close to knocking out the competition.. Man that was corny but I had to do it...lol

[obebaldone1]

Originally Posted by ClassiCutCustoms

No worries Baldy..... Rumour has it his sweetheart will be gone next week and he will be hanging out over here...... Lol

He may not make it that long.

[McTwist]

Man thats some crazy font upper link setup. Interested to see how that works out. Overall the rig is shipping up.


Sent from my iPad using Tapatalk

[obebaldone1]

Originally Posted by McTwist

Man thats some crazy font upper link setup. Interested to see how that works out. Overall the rig is shipping up.


Sent from my iPad using Tapatalk

It probably wont It does look out of whack in the photos. I was more or less rushing the front end so it will most likely change to a lower mounting point.

[obebaldone1]

I have a set of CCC glue on wheels with the old reliable rovers on them. But Im thinking of trying a set of voodoos I have on some slw's.