RCCrawler Forums

Stevemo · 08-03-2007, 03:59 PM

If you're really desperate, ther are a couple of shots of Axials' truck in action in the Axial West Coast Championship vid. Look closely at the 3:30 min. and again around 7:35min. Couple of rollovers but looks pretty capable.

Steve

tapped-out · 08-03-2007, 04:43 PM

Dose this ax10 come w/a pinion & spur gear?

BillH · 08-03-2007, 05:00 PM

Looks great I'll have to see what I can move to fund.

balang_479 · 08-03-2007, 05:11 PM

Im not sure if this has been answered yet, but will the production version come with the new soft compound tires? i know jasons came with the hard ones but will the production version be different?

CHEEZBURGER · 08-03-2007, 05:31 PM

I can't wait to see it up and running, I just found out that my lhs has layaway, they have four on order and one is mine no matter what, mwahaha

Zurbz · 08-03-2007, 06:16 PM

Quote:

Originally Posted by balang_479

Im not sure if this has been answered yet, but will the production version come with the new soft compound tires? i know jasons came with the hard ones but will the production version be different?

first version, the hard ones.

grapegoat · 08-03-2007, 06:16 PM

Quote:

Originally Posted by balang_479

Im not sure if this has been answered yet, but will the production version come with the new soft compound tires? i know jasons came with the hard ones but will the production version be different?

hope so. but unfortunately it looks like they have already been packaging them before the soft compounds came out. so i don't believe so. but i could be wrong. if i am wrong, go axial!!!!

TKG26 · 08-03-2007, 06:33 PM

The good thing is you get beadlocks so you can try them and swap them for the cost of tires only

BENDER · 08-03-2007, 08:32 PM

Quote:

Originally Posted by Dman

When are we goin to see a video!

I shot some video today, I'll get it posted up soon.

Krawlin · 08-03-2007, 09:08 PM

Quote:

Originally Posted by BENDER

I shot some video today, I'll get it posted up soon.

THE....ANTICIPATION....IS....KILLING....ME....!!!! MUST....SEE....VIDEO....NOW.....!!!!!

Well, you know if BENDER got some video, the video has got to be good. I cant wait to see it in action man.

Rockpiledriver · 08-03-2007, 09:28 PM

Quote:

Originally Posted by balang_479

Im not sure if this has been answered yet, but will the production version come with the new soft compound tires? i know jasons came with the hard ones but will the production version be different?

The kits come with the original version tires. The original version Lizards are not hard at all. They are soft. The new version Lizards are more sticky. For a production crawling kit, I think the original version tires should work just fine. As it was mentioned before, the kits come with beadlocks, so you can easily switch them out with sticky Lizards or any crawling tire of your choice.

tapped-out · 08-03-2007, 09:43 PM

Quote:

Originally Posted by RCP

The kits come with the original version tires. The original version Lizards are not hard at all. They are soft. The new version Lizards are more sticky. For a production crawling kit, I think the original version tires should work just fine. As it was mentioned before, the kits come with beadlocks, so you can easily switch them out with sticky Lizards or any crawling tire of your choice.

If the tires are the worst thing in the kit. I can live with that just have to buy some tires from RCP with my bonus dollars. sticky rock lizards or losi rock claws or moabs???

BENDER · 08-03-2007, 10:53 PM

Here's a couple pics from today, I should have the video up sometime tomorrow.

Mongo · 08-03-2007, 11:30 PM

Cool pics, can't wait for the video.

Krawlin · 08-03-2007, 11:31 PM

wow!

Nice pictures you took there BENDER. I cant wait for the video. I can tell... its gonna be great.

Dman · 08-03-2007, 11:51 PM

nice pics man cant wait too see the video tommorrow

BENDER what paint did u use for the betty looks real nice

bjornsson · 08-03-2007, 11:54 PM

great pictures!

is there any picturs from "under the hood" want to se electronics

Tanis · 08-04-2007, 12:23 AM

Looks like a solid truck, that will get beginners crawling faster than having to piece together a truck. Good job Axial

I have personally witnessed Matt's(from Axial)truck crawling at the Axial comp at Donner, and it was as capable as a lot of other trucks there.

Nathan

CHEEZBURGER · 08-04-2007, 06:27 AM

I would also like to see a naked scorpion so that I can see where to put the speed control and rx

NitroStar · 08-04-2007, 09:14 AM

I noticed the width of the Wheely King is wider than the Scorpion (about an inch). Is this because of the different tires used or is the Scorpions width maximum allowed in competition?

08-03-2007, 10:53 PM	#213
BENDER 2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake Posts: 8,328	Here's a couple pics from today, I should have the video up sometime tomorrow. Attached Images

08-03-2007, 11:51 PM	#216
Dman Pebble Pounder Join Date: Aug 2007 Location: Greenwood Posts: 101	nice pics man cant wait too see the video tommorrow BENDER what paint did u use for the betty looks real nice Last edited by Dman; 08-03-2007 at 11:55 PM.

08-04-2007, 09:14 AM	#220
NitroStar Pebble Pounder Join Date: Aug 2007 Location: South Central Mississippi Posts: 115	I noticed the width of the Wheely King is wider than the Scorpion (about an inch). Is this because of the different tires used or is the Scorpions width maximum allowed in competition? Last edited by NitroStar; 08-04-2007 at 09:17 AM.

08-03-2007, 03:59 PM	#201
Stevemo Newbie Join Date: Apr 2007 Location: Poconos Posts: 43	If you're really desperate, ther are a couple of shots of Axials' truck in action in the Axial West Coast Championship vid. Look closely at the 3:30 min. and again around 7:35min. Couple of rollovers but looks pretty capable. Steve

08-03-2007, 04:43 PM	#202
tapped-out I wanna be Dave Join Date: Dec 2006 Location: here Posts: 3,042	Dose this ax10 come w/a pinion & spur gear?

08-03-2007, 05:00 PM	#203
BillH Rock Stacker Join Date: Jan 2007 Location: Plattsburgh Posts: 67	Looks great I'll have to see what I can move to fund.

08-03-2007, 05:11 PM	#204
balang_479 Rock Crawler Join Date: Mar 2007 Location: Colorado Posts: 635	Im not sure if this has been answered yet, but will the production version come with the new soft compound tires? i know jasons came with the hard ones but will the production version be different?

08-03-2007, 05:31 PM	#205
CHEEZBURGER Rock Stacker Join Date: Aug 2007 Location: Colorado Posts: 70	I can't wait to see it up and running, I just found out that my lhs has layaway, they have four on order and one is mine no matter what, mwahaha

08-03-2007, 06:33 PM	#208
TKG26 Rock Stacker Join Date: Aug 2007 Location: Canada Posts: 86	The good thing is you get beadlocks so you can try them and swap them for the cost of tires only

08-03-2007, 11:30 PM	#214
Mongo RCC Addict Join Date: Aug 2005 Location: Pocatello Posts: 1,032	Cool pics, can't wait for the video.

08-03-2007, 11:31 PM	#215
Krawlin Quarry Creeper Join Date: Jul 2007 Location: Sierra Vista, Arizona Posts: 271	wow! Nice pictures you took there BENDER. I cant wait for the video. I can tell... its gonna be great.

08-03-2007, 11:54 PM	#217
bjornsson Rock Stacker Join Date: Jul 2007 Location: Sweden Posts: 90	great pictures! is there any picturs from "under the hood" want to se electronics

08-04-2007, 12:23 AM	#218
Tanis Keep it real Join Date: Jun 2006 Location: Yakima,WA Posts: 6,532	Looks like a solid truck, that will get beginners crawling faster than having to piece together a truck. Good job Axial I have personally witnessed Matt's(from Axial)truck crawling at the Axial comp at Donner, and it was as capable as a lot of other trucks there. Nathan

Sponsored Links

08-04-2007, 06:27 AM	#219
CHEEZBURGER Rock Stacker Join Date: Aug 2007 Location: Colorado Posts: 70	I would also like to see a naked scorpion so that I can see where to put the speed control and rx

RCCrawler Forums

Thread: Live Axial AX-10 build