|
|
This is my first build, only my second RC, and only my 3rd month. Must stop spending money. Stock AX10, Rooster Crawler with a 35t Integy TQ3 with a modified 3rd channel switch for rear stear (not in use, need something left to play with, maybe a dig) It played in the snow, and the mud that followed, before I even had the body painted, even before I had picked up the radio ( Thanks to Neil E for the TQ3, I had been swapping electronics with the stampede up until that ). http://je1330.googlepages.com/Mostly...7-03-12-1a.jpg http://je1330.googlepages.com/Mostly...7-03-12-5a.jpg And after getting the body on it, all it's seen is a log in some grass. Gotta feed it some rocks really soon. btw, this isn't a wheelie, the front end bounced up when it hit the log, just looks good... http://je1330.googlepages.com/Pseudo...2008-03-12.jpg |
My new "CARS" Atlas 70 turn crawler motor. Tamiya ESC. 7.2V GP3900 on the front servo. Hi-Tec 645MG servo. Race compound Axial Rock Lizards. http://farm3.static.flickr.com/2192/...7699b480_o.jpg http://farm3.static.flickr.com/2393/...e5690a7e_o.jpg http://farm3.static.flickr.com/2411/...7d747127_o.jpg http://farm3.static.flickr.com/2061/...664e278f_b.jpg |
Integy 55t Hitec 645 Mamba Max esc elite 1500 8 cell DX3R tx and SR3100 rx http://i262.photobucket.com/albums/i...g?t=1205464834 http://i262.photobucket.com/albums/i...g?t=1205464860 |
me and fordracer121 my specs bent links rear 55t mamba max hitec 645 losi rock claws and grappler 4 link front and rear 8 cell 1500 stock chassi stage 2 black and orange body fordracer121 hitec 645 cc sidewinder 3300 stick pack mostly all stock bent link rear white body this was our first comp http://i209.photobucket.com/albums/b...S4020034-2.jpg http://i209.photobucket.com/albums/b...S4020025-1.jpg http://i209.photobucket.com/albums/b...S4020027-2.jpg |
I'll finally post up mine... Novak 21.5 Brushless Novak Crawler MG645 Badlands Warthogglett body More to come. :) http://www.members.aol.com/justrichie/helios.jpg http://www.members.aol.com/justrichie/helios2.jpg |
|
MY CURRENT PICS AND SETUP, TELL ME WHAT YOU THINK Axial AX10 SCORPIAN NOVAK ROOSTER ESC AIRTRONICS M-8 RADIO NOVAK XXTRA RECIEVER INTEGY 55T MOTOR TEAM ORION 1600 2/3 BATTS PROLINE RC10GT BODY http://i250.photobucket.com/albums/g...e/HPIM2073.jpg http://i250.photobucket.com/albums/g...e/HPIM2074.jpg http://i250.photobucket.com/albums/g...e/HPIM2082.jpg http://i250.photobucket.com/albums/g...e/HPIM2079.jpg |
tq2 radio novak goat system mg945 servo tube chassis custom 2.2 tires 7 cell battery http://img.photobucket.com/albums/v2...sw2ax10015.jpg http://img.photobucket.com/albums/v2...sw2ax10019.jpg http://img.photobucket.com/albums/v2...sw2ax10016.jpg http://img.photobucket.com/albums/v2...sw2ax10014.jpg http://img.photobucket.com/albums/v2...sw2ax10020.jpg |
Well I decided to ditched my Edge chassis for a more comp worthy chassis and really like the low profile of the Blackjack chassis so I bought one lol. Here is what I am running with some pictures. Tell me what you think. Blackjack Chassis Axial tranny Axial axles RC4wd Knuckles RC4wd C's Sidewinder CC BEC Hitec 5955tg Integy v11 35t Spektrum DX3 with SR3001 RX 8 cell 2/3a nimh Mini LST Shocks ST bent lower links (beefy) Pede shafts Erickson Comp Heavy Beadlocks Proline Badlands http://i48.photobucket.com/albums/f2...AX-10/new3.jpg http://i48.photobucket.com/albums/f2...AX-10/new4.jpg http://i48.photobucket.com/albums/f2...AX-10/new8.jpg http://i48.photobucket.com/albums/f2...AX-10/new7.jpg http://i48.photobucket.com/albums/f2.../AX-10/new.jpg |
Here's mine. Body was a quick play around paint job, will do a nice one when my scale project is finished. AX10 Proline Helios body with a "playing around" paint job Aluminum Trans Gears HS-645 Steering (thinking of changing that, torque's a bit weak) Novak Rooster Integy 55 Losi Claws Driveshaft collars (till I decided to spend the money on punishers) Thunder power 1320mah 2S Lipo TCS "Smiley" rock rings Currently using my TQ3 from my Tmaxx, will be on DX3 or DX3i soon though. http://i275.photobucket.com/albums/j...99/helios2.jpg http://i275.photobucket.com/albums/j...9/helios21.jpg |
Bmw Thats right, the one. the only, BEAMER CRAWLER! "thumbsup" http://i302.photobucket.com/albums/n...ter010copy.jpg http://i302.photobucket.com/albums/n...ter001copy.jpg http://i302.photobucket.com/albums/n...ter003copy.jpg |
Ax10 HR alluminum c-hub, axle carrier, solid rear axel and center skid plate. RC4WD standard offset beadlocks Axial servo/lipo front mount Axial high clearance links Novak Super duty SC 9351 futaba steering servo thunder power 1350 3-cell li-po DSM http://i275.photobucket.com/albums/j...ch16comp35.jpg http://i275.photobucket.com/albums/j...h16comp321.jpg |
http://i26.tinypic.com/1z372j5.jpg http://i26.tinypic.com/2qxomsi.jpg http://i29.tinypic.com/2db2wjb.jpg http://i28.tinypic.com/2ahu0yr.jpg i just drilled holes in the chassis and moved the lower links,it made the wheel base longer and lowerd the truck? i dont know if this is good or not but ill try it. need some hop ups? thanks guys great site!!!! cc sidewinder esc 3-cell 11.1 volt apogee lipo hitec 5965 servo integy 65t motot |
4 Attachment(s) Here Is What We Have THEY WORK WELL |
my ax10 scorpion integy4000mah batteries,integy msr10 shocks,novac rooster esc and motor,strc 30 deg bend suspension links axial low cg battery servo tray, airtronics radio and reciever http://i203.photobucket.com/albums/a...5/lukas236.jpg http://i203.photobucket.com/albums/a...5/lukas235.jpg http://i203.photobucket.com/albums/a...5/lukas234.jpg http://i203.photobucket.com/albums/a...5/lukas233.jpg http://i203.photobucket.com/albums/a...5/lukas232.jpg http://i203.photobucket.com/albums/a...5/lukas221.jpg |
Gatekeeper Designs GC-1 Chassis AX-10 Axles Matrix 55-Turn Lathe Rooster Crawler 645MG Servo Badlands on Axial Beadlocks TCS Solid RockRings Traxxas Big Bores Controlled by a Spektrum DX3R Just have to mount the elextronics and paint the body and its off to the rocks. http://i87.photobucket.com/albums/k1.../IMG_12871.jpg http://i87.photobucket.com/albums/k1.../IMG_12881.jpg |
new setup http://i303.photobucket.com/albums/n...l/DSC00769.jpg http://i303.photobucket.com/albums/n...l/DSC00767.jpg http://i303.photobucket.com/albums/n...l/DSC00766.jpg http://i303.photobucket.com/albums/n...l/DSC00765.jpg http://i303.photobucket.com/albums/n...l/DSC00764.jpg http://i303.photobucket.com/albums/n...l/DSC00763.jpg http://i303.photobucket.com/albums/n...l/DSC00761.jpg |
Here's my Ax, it's stock for now. New Brite FJ Crusier body (Hacked, I'll clean it up when I get more time) Rooster crawler esc Novak 55t Futuba receiver and servo 1500 mAh split battery pack + spare 3300 mAh stick pack Stick on weights in the front tires, I need to add more. Future plans: Lower COG (mod stock shocks or buy new ones) Bent lower links Mirror trans mod (no dig for me) Straight axle adapters (maybe, been hearing bad things about them) Replace all plastic parts with Aluminum as they break. Deanodize all the green and go black or silver, not sure yet. I may just cover the links with black straws so they slide over rocks better. http://i6.photobucket.com/albums/y24...m/STP60832.jpg http://i6.photobucket.com/albums/y24...m/STP60834.jpg http://i6.photobucket.com/albums/y24...m/STP60835.jpg http://i6.photobucket.com/albums/y24...m/STP60831.jpg http://i6.photobucket.com/albums/y24...m/STP60837.jpg This is my modded New Brite crawler just for messing around in the house. I bought two just for the bodies. They cost me $34.99 from KBtoys. Moddified gears (90:1) Bigger motors Rockcrusher tires Custom built chassis Custom four link JP shocks http://i6.photobucket.com/albums/y24...r/STP60812.jpg |
| All times are GMT -6. The time now is 07:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com