Quote:
|
Red Bull Well heres mine, Kit truck, Mamba max esc, MGT Setering servo, got rid of all the uguly green,(thanks oven cleaner) K9popo's sweet chassis, Integey motor, the axial axel mount to push the servo to the side, i got the stock rims and tires but i just put on som axial rims with rock Crusher's for a try. rear shocks are the from the kit, fronts, who knows ihad them kicking around and there the rigt size. well here ya go http://photos-c.ak.facebook.com/phot...41362_8780.jpg http://photos-e.ak.facebook.com/phot...41364_1594.jpg http://photos-f.ak.facebook.com/phot...41365_2934.jpg http://photos-g.ak.facebook.com/phot...41366_4316.jpg soon to have pics in action soon as the batts show up. |
Defender 90 body on Axial with chassis 5 Attachment(s) Finally my defender is ready? A defender is never ready........ Just want to show how it is now.:-P I'm trying to build my own 1:1 Defender only with soft-top. Scaled my home made winchbumper with warn winch (not working:-() Scaled decals like on big D90. Attachment 66270 Attachment 66265 Attachment 66266 Attachment 66267 Attachment 66268 Let me know what you think:lol: |
My AX10 is my first r/c car ever, and I really love it :) I've been doing lots of reading and learning on this great forum, and am slowly learning I hope. I haven't done anything special with my AX10 - placed the spacers inside the shocks, split my 4200 stick into 3x pairs and mounted them over the front axle and front-upper links (bit of a squeeze :shock:). I had great ideas for the paintjob until I realised just how difficult it is to mask the inside of a body shell - kudos to you guys who have wicked paintjobs "thumbsup" Yesterday I tried my first bit of major body work - bob and dovetail. The first cut was the scariest :shock: lol. I had an idea for some simple tubework too - I found an old portable TV arial in the garage, and the largest tube looked about right for my rig, so I cut and chamfered the ends, made some plastic inserts from the plastic webbing from my AX10 kit and glued them into the ends of the tube. When they were dry I drilled and tapped them, then screwed through the body into the ends of the tubes. This makes the newly-cut rear of the body nice and rigid, PLUS I have no bolts showing where the back-end has been re-joined "thumbsup" Not much, I know, but I'm pleased with it :) Spec: AX10 kit imported from USA Novak Rooster / 55T 4200mAh saddle-pack 4x 9/16 ball bearings in each front wheel Star-cut Axial foams Airtronics MX-3 r/c gear Used the 4-AA holder to mount the Rx between the rear-upper links I have some bent links on order, and then plan to use the old links for a 4-link conversion (in an attempt to get rid of the torque twist) http://i189.photobucket.com/albums/z.../ax10-01-1.jpg http://i189.photobucket.com/albums/z...os/ax10-02.jpg http://i189.photobucket.com/albums/z...s/DSCF7702.jpg |
Took a couple of "beauty shots" today: http://mrn8.com/pics/albums/userpics...4-IMG_2895.jpg http://mrn8.com/pics/albums/userpics...4-IMG_2872.jpg |
Nice |
edge chassis, Full droop suspension using modified t-maxx shocks and some very nice springs at the hardware store to use internally, stage 2 kit, 15Oz in front wheels, i put the batteries in the back for some weight, 55T motor and rooster crawler esc, I'm just waiting for my VF dig unit. Attached Imageshttp://rcdriver.com/forums/attachmen...1&d=1211720998 http://rcdriver.com/forums/attachmen...1&d=1211720998 http://rcdriver.com/forums/attachmen...1&d=1211720998 |
|
|
http://i91.photobucket.com/albums/k2...lerpics013.jpg I'm having a tough time bringing myself to mounting my batteries on the front axle or on the links - takes much away from the looks of the rig. This is my second AX10, so I've learned a little from the last - lowered the ride height by swapping the shock spacers to the inside of the shock body, moved the lower links inboard at the chassis with the Hot Racing skid plate. My only complaint is that it gets hung up easily since it's not that slick. I have added lead weight to the front axle, which made a BIG difference in how well the truck climbs. The heavy Proline wheels help, too. I added the CF chassis to help bring the CG down a bit, as well. |
|
http://i283.photobucket.com/albums/k...k/IMG_0048.jpg http://i283.photobucket.com/albums/k...k/IMG_0049.jpg http://i283.photobucket.com/albums/k...k/IMG_0051.jpg http://i283.photobucket.com/albums/k...k/IMG_0044.jpg http://i283.photobucket.com/albums/k...k/IMG_0042.jpg http://i283.photobucket.com/albums/k...k/IMG_0046.jpg My babies. First run With LiPo. Novac rooster Crawler ESC and 55t motor. JR Z650m Servo. |
My AX I chose to go with Spectrum since they coat their electronics with a conformal coating making them water proof. I am also using rooster crawler ESC and Novak 55 turn crawler motor. http://lh5.ggpht.com/jasontville/SDm...0/IMG_0193.JPG http://lh4.ggpht.com/jasontville/SDn...0/IMG_0217.JPG http://lh6.ggpht.com/jasontville/SDy...0/IMG_0261.JPG http://lh4.ggpht.com/jasontville/SDy...0/IMG_0263.JPG http://lh4.ggpht.com/jasontville/SDy...0/IMG_0259.JPG |
my mostly stock RTR Cut foams traxxas endlinks venom 3000 pack http://i8.photobucket.com/albums/a2/...s/DSC00944.jpg http://i8.photobucket.com/albums/a2/...s/DSC00945.jpg http://i8.photobucket.com/albums/a2/...s/DSC00949.jpg http://i8.photobucket.com/albums/a2/...s/DSC00955.jpg |
Rock Whisperer Getting better at the painting...still not up to snuff with the awesome stuff I see on here. Click here to view the final product... Equipment list: Stock Axial Kit, bump stops moved inside shock housings, star-cut stock foams Integy 45t motor CC Sidewinder 6-cell saddle-pack (on order) Had it out on the rocks only once naked [the truck, not me :roll:] and was VERY impressed. I already have a long list of mods to make "thumbsup" |
Heres my rig, after a muddy crawl. http://i56.photobucket.com/albums/g1...1/P1040196.jpg http://i56.photobucket.com/albums/g1...1/P1040197.jpg |
A few of mine getting wet.... |
Here's a few pics of mine testing it out... http://img.photobucket.com/albums/v1...Image003-1.jpg http://img.photobucket.com/albums/v1...6/Image004.jpg And here's some of us crawling in SIngapore... http://img.photobucket.com/albums/v1...Image003-2.jpg http://img.photobucket.com/albums/v1...Image002-2.jpg http://img.photobucket.com/albums/v1...Image005-1.jpg |
Here is my AXIAL AX10 RTR with a couple minor updates. http://img2.putfile.com/thumb/6/15409443115.jpghttp://img2.putfile.com/thumb/6/15409443110.jpg |
hers mine nothing special right now . upgrades so far, tmaxx rear turnbuckles for lower links, cut stock foams, drilled wheels, upgrades in the mail, novak 55t, rc4wd rock crusher x/t 2.2 tires with memory foam, rooster crawler esc, axial aluminium steering components, new body, http://i111.photobucket.com/albums/n...98/toys663.jpg http://i111.photobucket.com/albums/n...98/toys665.jpg http://i111.photobucket.com/albums/n...98/toys656.jpg http://i111.photobucket.com/albums/n...98/toys653.jpg |
All times are GMT -6. The time now is 11:25 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com