04-07-2017, 03:07 PM | #1 |
Quarry Creeper Join Date: Dec 2015 Location: Sutter
Posts: 489
| Monster X cogging bad
Wasn't sure where to put this but I could use some direction Bomber with SSD High ratio transmission geared 11/56 on a HH 3500 esc. Using Turnigy 3cell 60c lipo battery. Firmware on esc is v2.02. I've confirmed that this isn't in the axles or transmission. Took apart and reassembled everything and it spins smooth. I just emailed castle but probably won't hear anything until next week so I thought I'd post up here. https://youtu.be/h1PE2kzJdyA Sent from my iPhone using Tapatalk |
Sponsored Links | |
04-07-2017, 03:10 PM | #2 |
Newbie Join Date: May 2016 Location: US
Posts: 49
| Re: Monster X cogging bad
What transmitter? And does it have an ABS option? Sent from my Nexus 6 using Tapatalk |
04-07-2017, 03:22 PM | #3 |
Pebble Pounder Join Date: Dec 2014 Location: Tip of the Mit
Posts: 168
| Re: Monster X cogging bad
Call them, open till 5 cst I believe. I had the same issue with mine(brand new) couldn't turn drag brake on, cogged real bad and castle link wasnt able to change any setting in the esc so we put my buddy's mmx in and worked perfect. Sent mine In almost 2 months ago and just now got tracking for my new esc today so fingers crossed this one works because I'm absolutely dying to try it out. I know this probably wasn't much help but figured I'd share my experience. |
04-07-2017, 03:28 PM | #4 |
Quarry Creeper Join Date: Dec 2015 Location: Sutter
Posts: 489
| Re: Monster X cogging bad |
04-07-2017, 03:29 PM | #5 |
Quarry Creeper Join Date: Dec 2015 Location: Sutter
Posts: 489
| Re: Monster X cogging bad
Also using Holmes sensor wire and don't have another to test. Sent from my iPhone using Tapatalk |
04-07-2017, 03:31 PM | #6 | |
Newbie Join Date: May 2016 Location: US
Posts: 49
| Re: Monster X cogging bad Quote:
Did you email them a logcat? Sent from my Nexus 6 using Tapatalk | |
04-07-2017, 04:46 PM | #8 |
Quarry Creeper Join Date: Dec 2015 Location: Sutter
Posts: 489
| Monster X cogging bad
I updated today to the latest castlelink and mmx 2.02 firmware hoping that it helped. I figured if it was a bad sensor wire or something it would be beeping. It seems to run fine at high speed but low speed is terrible. I guess I could try another rx and make sure it's not that but otherwise I'm at a loss. And I'm not sure what a logcat is. Sent from my iPhone using Tapatalk |
Monster X cogging bad - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sidewinder 3 5700 kv BAD COGGING | Jamifra | Non Crawler RC's | 10 | 03-21-2017 06:41 AM |
Wraith + Mamba Monster/2650kv = COGGING | Creepcreep | Electronics | 5 | 04-09-2016 05:19 PM |
Bad cogging and dead yeti?.. | Jigs | Axial Yeti | 8 | 12-20-2014 05:17 AM |
Tekin 13.5 just cogging or bad MMP? | Checkitout0125 | Electronics | 11 | 01-17-2012 07:28 AM |
| |