RCCrawler Forums

BGGruff · 07-22-2010, 06:14 PM

Here's my SCX10 TR Courier. I've had it a while and been upgrading it little by little. Been meaning to put it here for a while. There's quite a long list of upgrades so here's the link to the build. It's by far my favorite rig to crawl with!

BGGruff's TR (Stage 2 Courier)

Short Spec List:
Axial SCX10 Chassis
Proline Courier Body
RC4WD Rok Lox
Vanquish SX2W 1.9 BL's (This is the latest addition and they're Sweet!)
Novak Rooster Crawler ESC
Holmes 35T Handwound Yokomo Motor
DX3R Tx/Rx
RC4WD Servo
3Racing Winch
Maxamps 3250mah 2S Lipo
DH Fab Front bumper and Sliders
RC4WD Rear Spare Swingaway Bumper
Axial Running gear
Vanquish Lockouts, HiSteer Knuckles
Plenty of other Stuff!

Spidi · 07-24-2010, 05:40 AM

Hi
These are pictures of my SCX 10 with some custom parts(everything'shome made

).
Still a lot things to do...

F.artavia · 07-27-2010, 11:33 PM

santeecrawler · 07-28-2010, 11:46 PM

noogles · 07-31-2010, 06:34 AM

my work in progress. Defender hardbody mounted using magnets on the SCX10 Honcho kit. Shortened using Tamiya threaded rods at the rear. Still trying to figure out electronic placement.

671_oners · 08-02-2010, 04:38 PM

heres my sons own with 2.2 rok lox, proline titus weighted rims, xl-5 esc, stock motor, hitech 645 w/robotics arm, integy steering, junfac 12mm wideners and some trimming done to the body and from bumper to clear.....

vince

canadianbacon · 08-02-2010, 05:06 PM

Updated pic, has a 4 link rear now with custom links made from 8-32 all thread sleeved with 14" fuel line with Revo rod ends. Next up is so body trimming then start on the interior.

That's 7 cases high, the 3 other tires are still on the floor.

jbeane · 08-02-2010, 05:33 PM

purple one is my girls, scx10 with rok loxs mine is the chevy with the superswampers.

buddys green hancho with rok lox

LIFTED-ZJ · 08-02-2010, 07:50 PM

Just got the JK done

Evilsage · 08-03-2010, 09:55 AM

Finally got mine!
Gutted my AX-10 for running gear
55T Novak Rooster Motor and ESC combo (I want waterproof eventually and a good place to drive it)
Plain ol' HiTec Hi Torque servo some aluminum shocks and got RC4WD Rok-Lok tires on their steel pressed rims

yoda@4x4 · 08-04-2010, 09:18 PM

My honcho nothing to WOW over...

Lexar · 08-06-2010, 06:32 PM

Quote:

Originally Posted by ZUKMAN

Here are a few pics of my SCX10 in stock form. I will update pics as I make changes.

Novak Rooster Crawler esc
35 turn integy motor
21 tooth pinion 78 tooth spur
Cheap spectrum Servo
4000 mah 2 cell lipo

Soon to come 3racing winch/bumpers and new body

Build Thread
Zukmans SCX10

What wheels are they on the red FJ-40

Nice Truck Btw

RobCrawler65 · 08-06-2010, 08:44 PM

Here's my work in progress SCX10 RTR with Hilux body. I'm robbing the Novak Rooster Crawler esc/55 turn combo out of my AX10, just added a new set of steel classic wheels with Roc Lox tires from RC4WD and have one of their winches on the way.

I still haven't decided on a color yet....

Robert

LIFTED-ZJ · 08-10-2010, 07:19 PM

Jose C · 08-11-2010, 03:04 PM

Nice jeep.

speed ghilliesniper · 08-12-2010, 04:11 PM

muddy honcho

traxxas4fun · 08-13-2010, 09:38 PM

recent wheelin pics!

danielk181 · 08-14-2010, 07:32 PM

Here is my unfinished Honcho.

Specs: XL-5
Tamiya 32T motor(perfect)
Traxxas waterproof servo
DX3.S + SR300

rcmaniac78 · 08-17-2010, 09:17 AM

Here is my Honcho (long ways to go on it)

Traxxas XL-5 ESC (replacing soon)
Venom Fireball 55t motor (replacing soon)
Traxxas waterproof servo
Traxxas 2.4 Ghz Radio

Added other things not in the pics (PL front bumper, PL Light bar, Winch, weighted the front wheels) I also have a 50's Chevy body for it

All nice and painted.. and the second pic after being run a few times...

slackerman · 08-19-2010, 12:22 AM

My ever changing money pit.

SCX10 kit
Hilux Cab, honcho bed and bumper, and custom back cab.
6EX, 11.1 2200 30 lipos, 35t, Fut 9157 servo, FXR, CCBec, Axial NVS System, RC4WD Winch, Rok Lox 1.9, OEM Steelies, Chassis mounted servo, 4-linked all around, Alu C-hubs and high steer knuckles and steel drive shafts, connected to steel tranny outputs, and more.
The is how she sits currently, started and a full hilux, then bobbed the bed, and now this.

08-02-2010, 04:38 PM	#346
671_oners Rock Stacker Join Date: May 2010 Location: guam, usa Posts: 65	671 honcho heres my sons own with 2.2 rok lox, proline titus weighted rims, xl-5 esc, stock motor, hitech 645 w/robotics arm, integy steering, junfac 12mm wideners and some trimming done to the body and from bumper to clear..... vince

08-04-2010, 09:18 PM	#351
yoda@4x4 Looking for new Trails Join Date: Dec 2008 Location: GPS locating signal..... Posts: 558	My honcho nothing to WOW over... Attached Images Last edited by yoda@4x4; 08-04-2010 at 09:21 PM.

08-06-2010, 08:44 PM	#353
RobCrawler65 Newbie Join Date: Aug 2005 Location: Oklahoma Posts: 14	Hilux SCX10 Here's my work in progress SCX10 RTR with Hilux body. I'm robbing the Novak Rooster Crawler esc/55 turn combo out of my AX10, just added a new set of steel classic wheels with Roc Lox tires from RC4WD and have one of their winches on the way. I still haven't decided on a color yet.... Robert Last edited by RobCrawler65; 08-07-2010 at 01:40 AM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/axial-scx-10/157260-scx10-picture-archive-no-talking.html
Posted By	For	Type	Date
Link til modifiseet trial biler? - Storkøbenhavn´s kravler. - forum	This thread	Refback	02-14-2013 08:09 PM
Patski's RC Stuff! / 6x6 unimog...hmmm!	This thread	Refback	02-14-2013 06:56 PM

SCX10 Picture Archive - No talking - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wraith Picture Archive - No talking	Harley	Axial Wraith	1586	03-22-2023 12:32 PM
1:1 and Micro Picture Archive	MICHIGAN CRAWLER	Micro Scale Rigs	21	02-29-2012 02:02 PM
Picture archive	mental	South Carolina	21	08-18-2009 04:33 PM

07-22-2010, 06:14 PM	#341
BGGruff RCC Addict Join Date: Mar 2007 Location: MS Gulf Coast Posts: 1,949	Here's my SCX10 TR Courier. I've had it a while and been upgrading it little by little. Been meaning to put it here for a while. There's quite a long list of upgrades so here's the link to the build. It's by far my favorite rig to crawl with! BGGruff's TR (Stage 2 Courier) Short Spec List: Axial SCX10 Chassis Proline Courier Body RC4WD Rok Lox Vanquish SX2W 1.9 BL's (This is the latest addition and they're Sweet!) Novak Rooster Crawler ESC Holmes 35T Handwound Yokomo Motor DX3R Tx/Rx RC4WD Servo 3Racing Winch Maxamps 3250mah 2S Lipo DH Fab Front bumper and Sliders RC4WD Rear Spare Swingaway Bumper Axial Running gear Vanquish Lockouts, HiSteer Knuckles Plenty of other Stuff!

07-24-2010, 05:40 AM	#342
Spidi Newbie Join Date: Jul 2010 Location: Poland(Europe) Posts: 1	Hi These are pictures of my SCX 10 with some custom parts(everything'shome made ). Still a lot things to do...

07-27-2010, 11:33 PM	#343
F.artavia Newbie Join Date: Mar 2009 Location: San Jose Costa Rica Posts: 34

07-28-2010, 11:46 PM	#344
santeecrawler Newbie Join Date: Mar 2010 Location: San Diego Posts: 7

07-31-2010, 06:34 AM	#345
noogles Rock Stacker Join Date: May 2010 Location: brunei Posts: 76	my work in progress. Defender hardbody mounted using magnets on the SCX10 Honcho kit. Shortened using Tamiya threaded rods at the rear. Still trying to figure out electronic placement.

08-02-2010, 05:06 PM	#347
canadianbacon RCC Addict Join Date: Dec 2007 Location: Moncton, NB, Canada Posts: 1,962	Updated pic, has a 4 link rear now with custom links made from 8-32 all thread sleeved with 14" fuel line with Revo rod ends. Next up is so body trimming then start on the interior. That's 7 cases high, the 3 other tires are still on the floor.

08-02-2010, 05:33 PM	#348
jbeane Pebble Pounder Join Date: Jun 2010 Location: st. albans Posts: 127	purple one is my girls, scx10 with rok loxs mine is the chevy with the superswampers. buddys green hancho with rok lox

08-02-2010, 07:50 PM	#349
LIFTED-ZJ Quarry Creeper Join Date: Sep 2008 Location: Tualatin, Eugene Or Posts: 313	Just got the JK done

08-03-2010, 09:55 AM	#350
Evilsage Rock Stacker Join Date: Apr 2009 Location: Ontario Canada Posts: 85	Finally got mine! Gutted my AX-10 for running gear 55T Novak Rooster Motor and ESC combo (I want waterproof eventually and a good place to drive it) Plain ol' HiTec Hi Torque servo some aluminum shocks and got RC4WD Rok-Lok tires on their steel pressed rims

08-10-2010, 07:19 PM	#354
LIFTED-ZJ Quarry Creeper Join Date: Sep 2008 Location: Tualatin, Eugene Or Posts: 313

Sponsored Links

08-11-2010, 03:04 PM	#355
Jose C Newbie Join Date: Jul 2010 Location: Canary Island Posts: 33	Nice jeep.

08-12-2010, 04:11 PM	#356
speed ghilliesniper Quarry Creeper Join Date: Dec 2009 Location: St. Augustine Posts: 288	muddy honcho

08-13-2010, 09:38 PM	#357
traxxas4fun Quarry Creeper Join Date: Apr 2009 Location: Indianapolis Indiana Posts: 346	recent wheelin pics!

08-14-2010, 07:32 PM	#358
danielk181 Newbie Join Date: Jun 2010 Location: Brazil Posts: 28	Here is my unfinished Honcho. Specs: XL-5 Tamiya 32T motor(perfect) Traxxas waterproof servo DX3.S + SR300

08-17-2010, 09:17 AM	#359
rcmaniac78 Rock Stacker Join Date: Aug 2010 Location: Grafton, NH Posts: 96	Here is my Honcho (long ways to go on it) Traxxas XL-5 ESC (replacing soon) Venom Fireball 55t motor (replacing soon) Traxxas waterproof servo Traxxas 2.4 Ghz Radio Added other things not in the pics (PL front bumper, PL Light bar, Winch, weighted the front wheels) I also have a 50's Chevy body for it All nice and painted.. and the second pic after being run a few times...

08-19-2010, 12:22 AM	#360
slackerman Quarry Creeper Join Date: May 2009 Location: Reno Posts: 325	My ever changing money pit. SCX10 kit Hilux Cab, honcho bed and bumper, and custom back cab. 6EX, 11.1 2200 30 lipos, 35t, Fut 9157 servo, FXR, CCBec, Axial NVS System, RC4WD Winch, Rok Lox 1.9, OEM Steelies, Chassis mounted servo, 4-linked all around, Alu C-hubs and high steer knuckles and steel drive shafts, connected to steel tranny outputs, and more. The is how she sits currently, started and a full hilux, then bobbed the bed, and now this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler Forums

Thread: SCX10 Picture Archive - No talking