| |
10-12-2013, 08:27 PM
| #1 |
| Quarry Creeper Join Date: Apr 2009 Location: Lynnwood
Posts: 385
|  Built not bought scx10
My XJ as it sits:  Current setup includes: Fxr Solar d772 Team associated servo winch Beef tubes Aluminum knuckle c hubs and rear lockouts. Axial cvd's RR steel gears Junfac rear driveline and integy front ( front junfac wouldn't fit the wheelbase) All links made with traxxas rod ends, all thread an brake line Heyok winch controller Inner fenders made from dollar store Tupperware. Most of the parts I made with Harris safety silv, stay silv flux, and a propane tank. It's easier than a lot of people think! Plastic peices were made from left over lexan and styrene. Front bumper and tube fenders I made:  Rear bumper 1/2" square tube and 1/4" solid bar  Panhard setup 3/16" round bar silver soldered to 3m nuts:  Servo tray and battery mount: 1/8" aluminum  Lexan headlights from a jeep jk bumper piece(proline 3dr body) light bar made from led pen    Sliders 1/4" steel bar under tray is styrene:  Rear truss:  That's about it. If anyone has questions on how things were made feel free to pm me! Thanks for looking! |
|  |
| Sponsored Links | |
| | |
|
10-12-2013, 09:04 PM
| #2 |
| RCC Addict Join Date: Feb 2012 Location: Ca.
Posts: 1,580
| Re: Built not bought scx10
Nice work.
|
|
| |
|
10-12-2013, 10:34 PM
| #4 |
| Quarry Creeper Join Date: Apr 2009 Location: Lynnwood
Posts: 385
| Re: Built not bought scx10
thanks guys! i used harris safety silv 45, stay silv flux, a turbo torch head, and propane.
|
|
| |
|
10-20-2013, 03:28 AM
| #5 |
| Rock Crawler Join Date: Oct 2013 Location: Wiscasset, ME
Posts: 623
| Re: Built not bought scx10
Nice servo winch! I'll be adding that to my rig, once i get it haha. I put a servo winch in my Emaxx. Picks it off the ground no problems. Cheap Solar D772 servo too!
|
|
| |
|
10-20-2013, 01:44 PM
| #6 |
| I wanna be Dave Join Date: May 2011 Location: Lost in Oregon
Posts: 4,450
| Re: Built not bought scx10
I like it when anyone makes their own stuff....  |
|
| |
|
11-15-2013, 11:22 PM
| #7 |
| Pebble Pounder Join Date: Nov 2012 Location: illinois, rockford
Posts: 186
| Re: Built not bought scx10
sweet xj. I wish I could do some metal fabbing of my own but I have zero experience with solder or however its done with rcs
|
|
| |
|
11-16-2013, 06:03 AM
| #8 |
| Quarry Creeper Join Date: Oct 2013 Location: Nanaimo
Posts: 221
|
Im a big dys fan. Here is a frame set i built for a really broke friend. Cut the rails from a sheet of aluminum with an angle grinder.     The rest is parts from an exceed crawler that i cut and modded.
|
|
| |
|
11-16-2013, 09:16 AM
| #9 |
| Quarry Creeper Join Date: Apr 2009 Location: Lynnwood
Posts: 385
| Re: Built not bought scx10
Nice! I usually use 1/2" square tubing for my chassis's. Bend then split and order an scx brace set
|
|
| |
 |
Built not bought scx10 - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Nigel's Built Not Bought '81 Lux | Calderwood | 1.9 Scale Rigs | 4 | 06-27-2011 06:08 PM |
| Home built ebay bought Axail SWX | DioptricStraw | Axial AX-10 Scorpion | 16 | 11-09-2010 07:44 PM |
| Built, not bought | tigman250 | EnRoute Berg | 3 | 10-11-2010 09:56 PM |
| |
Linear Mode
