Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: 6sharky9's Rubicon Sleeper build

Reply
 
LinkBack Thread Tools Display Modes
Old 01-01-2014, 05:41 PM   #1
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default 6sharky9's Rubicon Sleeper build

Planning to get going with the RTR Rubicon Unlimited build using as little as possible aftermarket wise to make it a performer...This will be a super low budget performance "sleeper".

What is the definition of a sleeper?

Well in the automotive world you could describe a sleeper as being a vehicle with no indications to its performance ability.

An example would be how in the 80s ford built the Taurus SHO V6...Just a plain jane 4 door no frills family car.

What made it a sleeper is the fact it could eat up v8 Camaros and even 5.0 mustangs for lunch and crap them out with out batting an eye.
The Camaro and mustang both being known in the performance world with v8 power

Its basicly what you cant see that makes a vehicle a sleeper.

I recall being at the drag strip one night and seeing this ugly rusted out green 80s Volvo with stock rusted steel wheels on it lining up against a mustang 5.0 with drag wheels and the hood scoop and yada yada...The mustang did beat the Volvo but what I wasn't expecting was to see the 13.15 ET at over 105mph the Volvo clicked off...That was an amazing sleeper car..I honestly figured something like 17s maybe a high 16 in the 1/4.

That was a prime example of a sleeper.

This will be a fun one.

As it sits now

I moved the battery to the front like the RTR Honcho
Ive made some home made lower links and steering links.
The rest is 100 percent RTR stock as of now.(minus deans battery plugs)





Last edited by 6sharky9; 01-01-2014 at 07:29 PM.
6sharky9 is offline   Reply With Quote
Sponsored Links
Old 01-01-2014, 06:48 PM   #2
20K Club
 
Harley's Avatar
 
Join Date: Jul 2004
Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
Default Re: 6sharky9's Rubicon Sleeper build

Ok, I'll jump in now...
Harley is offline   Reply With Quote
Old 01-01-2014, 06:52 PM   #3
Rock Crawler
 
Join Date: Jan 2007
Location: Lehigh Valley
Posts: 956
Default Re: 6sharky9's Rubicon Sleeper build

Isn't that just called "stock"?
jmz6 is offline   Reply With Quote
Old 01-01-2014, 06:54 PM   #4
Moderator Rule Breaker
 
eric113's Avatar
 
Join Date: Feb 2004
Location: Austin, Tx
Posts: 5,970
Default Re: 6sharky9's Rubicon Sleeper build

Guess my jk is "sleeper"
eric113 is offline   Reply With Quote
Old 01-01-2014, 07:10 PM   #5
Newbie
 
Join Date: Dec 2013
Location: Alpharetta
Posts: 50
Default Re: 6sharky9's Rubicon Sleeper build

How did you go about relocating the battery tray? I want to do this to my rubicon
Road1will is offline   Reply With Quote
Old 01-01-2014, 07:13 PM   #6
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by jmz6 View Post
Isn't that just called "stock"?
It can be stock...but you can make changes that aren't so apparent to the naked eye as well.
6sharky9 is offline   Reply With Quote
Old 01-01-2014, 07:14 PM   #7
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by Road1will View Post
How did you go about relocating the battery tray? I want to do this to my rubicon
You just need one very long screw for the front..the rest you should have to make the change.


Edit:

Actually you may need a few spacers as well like what comes on the honcho.

Look up the honcho manual and you will see the spacers you need or you can make some fairly easy from tubing.

Last edited by 6sharky9; 01-01-2014 at 07:27 PM.
6sharky9 is offline   Reply With Quote
Old 01-01-2014, 08:29 PM   #8
I wanna be Dave
 
Join Date: Sep 2006
Location: Anchorage, Alaska
Posts: 3,099
Default Re: 6sharky9's Rubicon Sleeper build

That Taurus platform was a pos
and it's engine performance was no miracle.

Just because it was faster then a some other mom n pops pos's
don't make it worth dreaming about

sleeper to me is...
...stock looking vehicle
...with a ballzy bb bastard motor.

^ preferably something from the '60s

? sooo... does this mean yer gonna finally use a 3s ?
TacoCrawler is offline   Reply With Quote
Old 01-01-2014, 09:05 PM   #9
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by TacoCrawler View Post
That Taurus platform was a pos
and it's engine performance was no miracle.

Just because it was faster then a some other mom n pops pos's
don't make it worth dreaming about

sleeper to me is...
...stock looking vehicle
...with a ballzy bb bastard motor.

^ preferably something from the '60s

? sooo... does this mean yer gonna finally use a 3s ?
I know right ..it sucked getting beaten by a POS platform with a v6 motor with the induction system designed by YAMAHA.. but you cant deny it was a sleeper in its day.

And to the 3s question... HELL NO!!!!!

GensAce 4000mah 25c 2s

Last edited by 6sharky9; 01-01-2014 at 09:17 PM.
6sharky9 is offline   Reply With Quote
Old 01-01-2014, 09:31 PM   #10
Rock Crawler
 
Join Date: Dec 2005
Location: Tulsa, Oklahoma
Posts: 857
Default Re: 6sharky9's Rubicon Sleeper build

So, its not going to be a sleeper, its just stock? How does a rock crawler become a sleeper? No 3s = no sleeper.
Shaun is offline   Reply With Quote
Old 01-01-2014, 09:59 PM   #11
I wanna be Dave
 
Join Date: Jan 2012
Location: CANADA
Posts: 2,648
Default Re: 6sharky9's Rubicon Sleeper build

I am asleep reading this!! Yay!! I am a sleeper!!
ZippoMan is offline   Reply With Quote
Old 01-01-2014, 10:05 PM   #12
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by Shaun View Post
So, its not going to be a sleeper, its just stock? How does a rock crawler become a sleeper? No 3s = no sleeper.
The fact that you may look at it and "THINK" its stock is what makes it a sleeper.

Not all about power.
6sharky9 is offline   Reply With Quote
Old 01-01-2014, 10:06 PM   #13
I wanna be Dave
 
Join Date: Jan 2012
Location: CANADA
Posts: 2,648
Default Re: 6sharky9's Rubicon Sleeper build

ZippoMan is offline   Reply With Quote
Old 01-01-2014, 10:13 PM   #14
Quarry Creeper
 
Join Date: Nov 2005
Location: Western, NC
Posts: 490
Default Re: 6sharky9's Rubicon Sleeper build

I have a JK kit in the mail and will be moving my battery forward also, like all my rigs.

As far as the Taurus goes, they were quick for a family car no doubt. But, a guy in high school had a second gen SHO with the Yamaha motor, and I never once saw it win against a 5.0 mustang (nor any other SHO's for that matter). It was heavier, made less HP (negligible, only 5HP difference) but a lot less TQ and horrible manners coming off the line being FWD. High HP FWD cars are notorious to terrible TQ steer and weight transfer issues that do just the opposite of what is needed coming out of the hole. But, like most forms of racing, it's 80% driver / rider, 20% vehicle.
hpiguy is offline   Reply With Quote
Old 01-01-2014, 10:14 PM   #15
666
MODERHATER™
 
666's Avatar
 
Join Date: Nov 2005
Location: Colorado
Posts: 10,939
Default Re: 6sharky9's Rubicon Sleeper build

Yay a stock rig with the battery moved forward... So revolutionary! Have you been hanging out with Dirk?
666 is offline   Reply With Quote
Old 01-01-2014, 10:15 PM   #16
Rock Crawler
 
Join Date: Dec 2005
Location: Tulsa, Oklahoma
Posts: 857
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by 6sharky9 View Post
The fact that you may look at it and "THINK" its stock is what makes it a sleeper.

Not all about power.
Oh, excuse me for my ignorance. I just realized that you moved the shocks inward, removed the tire carrier, raised the body, and some how manage to install 1 tire backwards. Thing aught to be a beast!! Probably going to show those MOA rigs whats up with that sleeper there. I'd go the extra mile though and run 1 cell, just to really get in their head.
Shaun is offline   Reply With Quote
Old 01-01-2014, 10:17 PM   #17
I wanna be Dave
 
Join Date: May 2009
Location: Tehachapi,Ca
Posts: 2,334
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by 6sharky9 View Post
The fact that you may look at it and "THINK" its stock is what makes it a sleeper.

Not all about power.
Maybe true but if it looks stock and I "think" it's stock,
And blow by you shooting 10' 4wd roosts in the mud, or crawling over/around you with my 4s.....it ain't a sleeper.

Or wait maybe it was sleeping.
boosted4lyf is offline   Reply With Quote
Old 01-01-2014, 10:18 PM   #18
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by hpiguy View Post
I have a JK kit in the mail and will be moving my battery forward also, like all my rigs.

As far as the Taurus goes, they were quick for a family car no doubt. But, a guy in high school had a second gen SHO with the Yamaha motor, and I never once saw it win against a 5.0 mustang (nor any other SHO's for that matter). It was heavier, made less HP (negligible, only 5HP difference) but a lot less TQ and horrible manners coming off the line being FWD. High HP FWD cars are notorious to terrible TQ steer and weight transfer issues that do just the opposite of what is needed coming out of the hole. But, like most forms of racing, it's 80% driver / rider, 20% vehicle.
Perhaps they had things done to it you couldn't see and one assumed it was stock..Again; the term sleeper means just that...Or maybe what you do see isn't what it appears to be.
6sharky9 is offline   Reply With Quote
Old 01-01-2014, 10:21 PM   #19
RCC Addict
 
Join Date: Jul 2013
Location: Planet Earth
Posts: 1,286
Default Re: 6sharky9's Rubicon Sleeper build

Quote:
Originally Posted by boosted4lyf View Post
Maybe true but if it looks stock and I "think" it's stock,
And blow by you shooting 10' 4wd roosts in the mud, or crawling over/around you with my 4s.....it ain't a sleeper.

Or wait maybe it was sleeping.
Like I said its not all about power...for racing its not even all about power..So many other variables determine performance.
6sharky9 is offline   Reply With Quote
Old 01-01-2014, 10:26 PM   #20
666
MODERHATER™
 
666's Avatar
 
Join Date: Nov 2005
Location: Colorado
Posts: 10,939
Default Re: 6sharky9's Rubicon Sleeper build

I think we all know what a sleeper is...

What you have is.... a rtr with the battery moved forward and plastic upper links...

What we have is you giving is something to laugh at! And we thank you for the constant laughs!

Enjoy yourself and your "sleeper" show up to a comp and show us what you got!

666 is offline   Reply With Quote
Reply

Tags
douche bag sleeper-troll, hilarious read, homo ghey, poke the shark, really_really_pointless, troll thread, vagina



6sharky9's Rubicon Sleeper build - Similar Threads
Thread Thread Starter Forum Replies Last Post
Inside 6sharky9's SCX10 Honcho RTR 6sharky9 Axial SCX-10 64 08-05-2014 05:50 AM
The long slow v-dub doublecab sleeper build halfcab 1.9 Scale Rigs 116 02-23-2014 03:35 PM
6Sharky9's custom built 1/8 Buggy 6sharky9 Non Crawler RC's 0 12-26-2013 12:19 AM
Sleeper... RANOVRU Chit Chat 41 03-06-2011 07:58 PM
My Sleeper Ax-10 build JeepinDoug Axial AX-10 Scorpion 13 05-21-2008 09:00 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com