|
| LinkBack | Thread Tools | Display Modes |
04-24-2014, 11:21 AM | #1 |
Rock Crawler Join Date: Jan 2012 Location: Hudsonville, MI
Posts: 875
| Jevne CMS Brick plate and VP CMS
Can anyone tell me if the Jevne Racing CMS Brick Plate will work with my VP CMS? I have the VP CMS that attaches the servo to the inside of the frame rail - the servo runs parallel with the frame rail. By looking at the pictures, I'm not sure if the Jevne Brick Plate will work without major modifications to either the CMS servo bracket or the brick plate. Thanks in advance for your help! Sent from my modded TI-83 plus. |
Sponsored Links | |
04-24-2014, 11:52 AM | #2 |
RCC Addict Join Date: Feb 2008 Location: Tekin, ID
Posts: 1,940
| Re: Jevne CMS Brick plate and VP CMS
If you get the Jevne CMS plate it should clear just fine. I'm about to put one on my Bronco with a Hand Bros CMS system.
|
04-24-2014, 02:42 PM | #3 |
Rock Crawler Join Date: Jan 2012 Location: Hudsonville, MI
Posts: 875
| Jevne CMS Brick plate and VP CMS
Thanks Ty! I do remember your reply to my PM regarding this. On the Jevne Racing website, it says that they had to cut a notch out of the Hand Bros CMS bracket to get the CMS Brick plate to fit properly in the front. Just wondering if the VP and the Hand Bros CMS's are similar??? I guess it's not a huge deal if I have to cut a notch out of the CMS bracket... Sent from my modded TI-83 plus. |
04-24-2014, 04:00 PM | #4 |
Rock Stacker Join Date: Sep 2011 Location: mcminnville
Posts: 53
| Re: Jevne CMS Brick plate and VP CMS
It does fit. I recently purchased these and have them currently on my scx10.
|
04-24-2014, 04:13 PM | #5 |
Rock Crawler Join Date: Jan 2012 Location: Hudsonville, MI
Posts: 875
| |
04-24-2014, 05:01 PM | #6 |
Quarry Creeper Join Date: May 2012 Location: Industry
Posts: 269
| Re: Jevne CMS Brick plate and VP CMS
No it doesn't. The VP CMS mounts in the front and the Hand Bros mounts along the side. If you try both you will have to cut out the front of the JR plate to go around the servo. Here is the side view of the JR plate with the cms. I don't have my VP cms mounted yet but you can see how it goes up to the front of the truck. Don't know how anyone would get that to work together. |
04-24-2014, 05:06 PM | #7 |
Quarry Creeper Join Date: May 2012 Location: Industry
Posts: 269
| Re: Jevne CMS Brick plate and VP CMS
Here is another top view after I had to cut down my plate. You can see the VP cms up front. Here is a view from underneath |
04-24-2014, 05:26 PM | #8 |
Rock Crawler Join Date: Jan 2012 Location: Hudsonville, MI
Posts: 875
| Jevne CMS Brick plate and VP CMS
I don't have the VP bumper mount CMS. I have the newer CMS that mounts along the side of the frame rail. The servo runs parallel with the frame. I don't have the CMS installed yet, so I grabbed a couple pics from VP's website. Sent from my modded TI-83 plus. Last edited by 2-shot; 04-24-2014 at 05:29 PM. |
04-25-2014, 08:50 AM | #9 |
RCC Addict Join Date: Feb 2008 Location: Tekin, ID
Posts: 1,940
| Re: Jevne CMS Brick plate and VP CMS
Yeah, that's the bumper mount, not chassis mount setup from VP. I have the bumper mount on my JK and the Jevne Brick plate, it's a lot taller. I am going to have to notch the Hand Bros mount to get my JR plate all the way down in position, you're right on that one. |
04-25-2014, 09:17 PM | #10 |
Rock Stacker Join Date: Sep 2011 Location: mcminnville
Posts: 53
| Re: Jevne CMS Brick plate and VP CMS
Like I said, I have both and I didn't modify anything. It's tight, but it fits. I could take a pic if really needed. Edit: I have the vp cms 3 link kit. Not the bumper mount cms. |
04-25-2014, 09:59 PM | #11 | |
Rock Crawler Join Date: Jan 2012 Location: Hudsonville, MI
Posts: 875
| Quote:
If you wouldn't mind taking a pic and posting it, I would like to see the Brick Plate with the VP CMS. Sent from my modded TI-83 plus. | |
04-26-2014, 07:26 PM | #12 |
Rock Stacker Join Date: Sep 2011 Location: mcminnville
Posts: 53
| Re: Jevne CMS Brick plate and VP CMS |
Jevne CMS Brick plate and VP CMS - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jevne Racing Recon Brick SCX10 Battery Plate | badd_maxx25 | Axial SCX-10 | 19 | 03-29-2015 02:34 PM |
| |