06-28-2015, 02:45 AM | #1 |
Newbie Join Date: Jun 2015 Location: Burnet
Posts: 3
| SCX-10 Class 2 Build
Not Very Good At These Build Treads But Will Try Started Life as a Honcho Broke most the plastic stuff first day out, So started to rebuild, Ordered up a Integy Alloy Kit, And a metal rear cage off ebay Went with a RC4wd Bumper and winch. Test fitting the F250 Quick Mock up, 2.2 Alloy Integy Wheels, Pro Line Flat Irons Got the Rc4wd metal side bars, GCM front motor plate and Tcase, HR 4 Link 12.3WB Integy 100mm piggyback shocks,GSM CMS,Rc4wd 35t motor, Integy metal spur gear, RP 19tooth Pinon, Integy heat sink, Integy Driveshafts, Knockles, draglink and Axle shafts, Rc4wd 2 Speed trans. Had to make a custom shifter plate. Videos Of The Shifter https://youtu.be/YE97prIksd8 https://youtu.be/qD1S_XL4cpk Ordered up a Rc4wd 3 Link panhard kit, had to modify it Got the new controller in 9 Channel And now im starting on the Floorboard and dash. 06/29/15 Could not find metal body post long enough so made some from old 3000GT intake bolts Started working on the bed panels 07/08/15 Added a rear tire mount to the cage, Getting it sand blasted Primered 3rd coat of paint Got all the pan and tilt setup in today Ready for camera Pan And Tilt in action https://youtu.be/WsFCHnWD9N4 Body painted and reinstalled 07/16/205 Axles showed up today 07/19/2015 Lot of stuff to do today Got the new steering servo in today. Got some help from a friend Most of the wiring in the truck After a few hours and hours of heat shrink deans connectors. Took it out had a little fun made it about 30 minutes till it broke. lol the one weak link.... 08/04/2015 Broke about 5 more sets of driveshafts so i broke down and bought mip's also moved the motor back to the center put 19mm spacers and the vp High steer knuckles Moved the rear links to the front and made custom 1" longer ones for the rear I drives great know I was started to get a little depressed when my stock honcho could out drive it but it does weigh in at almost 14lbs but know its pretty close and a heck of alot funner to drive. The front yard playground we are setting up. Last edited by Pureevil; 08-06-2015 at 06:49 AM. |
Sponsored Links | |
06-30-2015, 01:22 PM | #2 |
Newbie Join Date: Sep 2014 Location: Pittsburgh
Posts: 33
| Re: SCX-10 Class 2 Build
looks really good. did you mount that cage on the back of the frame? Sent from my SAMSUNG-SM-N910A using Tapatalk |
07-08-2015, 02:42 PM | #3 |
Newbie Join Date: Jun 2015 Location: Burnet
Posts: 3
| Re: SCX-10 Class 2 Build
Yep, mounted to the rear bumper holes
|
07-08-2015, 05:55 PM | #4 |
Rock Stacker Join Date: Jul 2015 Location: New Richmond
Posts: 93
| Re: SCX-10 Class 2 Build
Do you have the part numbers for the trans mount/trans/transfer case/ drive shafts? That is a SWEET setup! Nice work!
|
07-16-2015, 08:16 PM | #5 |
Newbie Join Date: Jun 2015 Location: Burnet
Posts: 3
| Re: SCX-10 Class 2 Build I posted it 3 times, i guess i will pm them to you
Last edited by Pureevil; 07-20-2015 at 01:05 AM. |
SCX-10 Class 2 Build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Famous112's Gelande II Build! / Class 1 ( 1.9 ) Build | Famous112 | 1.9 Scale Rigs | 3 | 04-07-2014 09:18 PM |
Tamiya FJ40 SCX-10 for UTRCRC Street Class | Just Zach | 1.9 Scale Rigs | 63 | 10-18-2012 01:54 PM |
| |