Re: Imthatguy builds an SCX10 II
 

I guess you didn't try very hard then... :roll:

One minor cut in the cage and another in the body and I'm on my way to a Jeepspeed.

Re: Imthatguy builds an SCX10 II
 

Back deck to go with that front porch?

Re: Imthatguy builds an SCX10 II
 

HAAA HA HA HA :lmao: "front porch"

I like where this is going. those links look to clean compared to the diff covers right now... :flipoff:

Re: Imthatguy builds an SCX10 II
 

Fine! I'll dirty those up as well!

Re: Imthatguy builds an SCX10 II
 

I hope your doors are missing so you can get in and out.

Re: Imthatguy builds an SCX10 II
 

Nice. I love the Honcho bodies. I actually fitted one to my AX10 Ridgecrest. Or I guess now it's an AX10 Honcho.lol

Sent from my XT1585 using Tapatalk

Re: Imthatguy builds an SCX10 II
 

Nah, Jeepspeed Jeeps need to keep the doors intact.

Keep in mind I'm only using the rear cage - I have no idea if a full Honcho will fit.

Re: Imthatguy builds an SCX10 II
 

And now that major construction is done, The tedious job of masking with liquid mask and tracing begins!

http://imagizer.imageshack.us/v2/102...922/IZJB1a.jpg

Re: Imthatguy builds an SCX10 II
 

Some more cutting:

http://imagizer.imageshack.us/v2/800...922/neGa1c.jpg

Re: Imthatguy builds an SCX10 II
 

Im considering using the honcho cage inside the XJ - you think there will be any issues with it fitting?

Re: Imthatguy builds an SCX10 II
 

As that's what I'm doing, no, you shouldn't have much trouble. I cut out a portion of the bottom between the two screw points, and I'll need to hard mount it to the chassis, but that's easy stuff.

Re: Imthatguy builds an SCX10 II
 

the dingo fits nice inside my proline xj as interior. but its not full interior. the honcho rear cage should be sweet.

Re: Imthatguy builds an SCX10 II
 

Im going to try and use the Dinky Universal interior

Re: Imthatguy builds an SCX10 II
 

Of all the builds so far that's the only one to point out the servo winch setup thanks for the info!
"thumbsup"

Re: Imthatguy builds an SCX10 II
 

I see you've been watching and if someone wishes to:
https://www.youtube.com/watch?v=RRa0-Sw6Ts0

Re: Imthatguy builds an SCX10 II
 

It's crazy how steady your hand is :shock:

Re: Imthatguy builds an SCX10 II
 

Both good choices. I'm probably going to use what I have on hand. Either Bomber, Yeti TT or Wraith interior is the best I'll be able to muster.

Not a problem, probably one of my favourite add-ons Axial did. Really speaks to the comp guys on that one.

Oh, I've watched. Over and over and over again!

Lots of practice - and ten years of medical school. Of course I flunked out and only needed one credit to graduate.

Wheels, for wheeling. I really like the look of these Vanquish Method Roost's.

http://imagizer.imageshack.us/v2/800...923/MV4Ak3.jpg

Re: Imthatguy builds an SCX10 II
 

I saw those wheels today. I kinda want them, but dang at the price.

Re: Imthatguy builds an SCX10 II
 

You get what you pay for!

I don't get it. I've seen a couple folks moving the trans around to flip it, and while that certainly makes it look more, realistic-ish, you have to give up a lot straight away.

1. You lose the servo winch mount
2. You nullify the waterproof receiver box
3. You change the vehicle's near-perfect weight distribution
4. You reduce battery tray size.

All in the effort to make more room for an interior? I can definitely work around the hump as it is, and not have to modify anything!

Maybe I'm underthinking it? :shock:

Re: Imthatguy builds an SCX10 II
 

I've been scratching my head at that too, I won't lie the realism of the tcase on the rear would be great but I haven't been able to figure out a way while retaining all the good things.