Harley's Axial Wraith Build - Jimmy's 4x4 Ultra 4 KOH Style

[ev0l]

Originally Posted by Maddog Madigan

Make sure you get a hold of EvOl for camera action. Looking forward to it! Hope the tornados tone down a bit down there.

Oh I want to trust me! I'm freekin cursed though. Looks like I might have to work this weekend. There is always something interfering with my shooting days! I need to figure out how to make this my day job...lol

My Wraith is still in pieces. I need to install a servo. Looks like it's back to JR for now.

[Harley]

Originally Posted by ev0l

Oh I want to trust me! I'm freekin cursed though. Looks like I might have to work this weekend. There is always something interfering with my shooting days! I need to figure out how to make this my day job...lol

My Wraith is still in pieces. I need to install a servo. Looks like it's back to JR for now.

That's terrible news! The rig is going to be all torn up by the time I get any video of it.

[bagged86]

Can ask why the opt-out for the team-threesix seats
Also how many resistors are needed for the rear setup?
Awesome rig!!!

[muddywaters]

WTG Harley, very impressed on how that Bad boy turned...

[Harley]

Originally Posted by bagged86

Can ask why the opt-out for the team-threesix seats
Also how many resistors are needed for the rear setup?
Awesome rig!!!

I'll still run his seats, just haven't gotten any yet.

There are 3 resistors on the rear light setup.

[bagged86]

Originally Posted by Harley

I'll still run his seats, just haven't gotten any yet.

There are 3 resistors on the rear light setup.

did you get them from radio shack by chance or online

[Harley]

Originally Posted by bagged86

did you get them from radio shack by chance or online

I bought a few hundred a couple years ago, don't remember the source.

[Harley]

Ran the rig today after our local comp. It was a great time, the Pro4 is exactly what the rig needs with how heavy it is.

Unfortunately I took a tumble about about 30+ feet down a hill and tore up my front servo gear set. So that ended my day early. Evol was there luckily to catch video of the rig before that. So I am going to wait here and hold my breath until he can put something together.

[Harley]

Evol got the video up!

[tinycrites]

How did your new lipo's do, what kind of run time did you get from them.

[Harley]

As seen in the video, the Pro4 is a lot of power and a 10lb truck puts a lot of stress on parts. My next concern is the transmission, specifically the outputs.

I have two options, one is to go to an AX10 style case and extended beefed up outputs made from chomoly. The second option is trying out the new Robinson one piece locker.

TowerHobbies.com | 1555 Robinson Racing One Piece Steel Bottom Diff Gear Wraith

[Szczerba]

Great looking and performing rig!

[Harley]

Originally Posted by tinycrites

How did your new lipo's do, what kind of run time did you get from them.

Over 35 mins but thats when I changed packs.

[tinycrites]

Sounds good I should have mine this week. I'm running a tekin 13.5.

[Harley]

Originally Posted by tinycrites

Sounds good I should have mine this week. I'm running a tekin 13.5.

I am extremely pleased with the packs. Worth every penny.

[tinycrites]

That video makes me want a Pro4

[blacrubi]

did you notice if the motor got real hot? i have 4:1 gearing 60t spur and 15t pinion on my pro4 with 40c 3s packs and i can only run mine for like 15 mins max before it gets too hot to touch. thanks

[Harley]

Originally Posted by blacrubi

did you notice if the motor got real hot? i have 4:1 gearing 60t spur and 15t pinion on my pro4 with 40c 3s packs and i can only run mine for like 15 mins max before it gets too hot to touch. thanks

Barely warm at all.

[atsownz]

I to was wondering about the new Robinson locker.. Keep us posted if you decided to go that route.

Also, how tight are you running your slipper in the posted video?

Originally Posted by Harley

As seen in the video, the Pro4 is a lot of power and a 10lb truck puts a lot of stress on parts. My next concern is the transmission, specifically the outputs.

I have two options, one is to go to an AX10 style case and extended beefed up outputs made from chomoly. The second option is trying out the new Robinson one piece locker.

TowerHobbies.com | 1555 Robinson Racing One Piece Steel Bottom Diff Gear Wraith

[Harley]

Originally Posted by atsownz

I to was wondering about the new Robinson locker.. Keep us posted if you decided to go that route.

Also, how tight are you running your slipper in the posted video?

It's pretty tight, Locked down and then back out a half turn.