11-13-2012, 10:16 PM | #1 |
Pebble Pounder Join Date: Mar 2011 Location: Hollister, california
Posts: 103
| Turning radius?
My cirrus servo wont turn more than the stock steering angle. I thought it was my axles so i got the universals, but it still turns like stock. Is there a servo that turns more? I dont know whats wrong please help thanks.
|
Sponsored Links | |
11-13-2012, 11:12 PM | #2 |
I wanna be Dave Join Date: Jun 2008 Location: Vermont
Posts: 2,016
| Re: Turning radius?
How much more does it need to max out? Did you center the transmitter settings before putting the servo horn on? |
11-13-2012, 11:17 PM | #3 |
Pebble Pounder Join Date: Mar 2011 Location: Hollister, california
Posts: 103
|
Yes i did and it needs about 20 degrees.
|
11-13-2012, 11:30 PM | #4 |
Pebble Pounder Join Date: Sep 2011 Location: Medford
Posts: 158
| Re: Turning radius?
Try a longer servo horn, The longer the arm the greater the throw/sweep. I had a situation with a shorter arm and I had the dual rate on the tx maxed out and still wasn't getting the throw I was looking for so I got a new longer servo horn and that helped. I was able to back off the dual rate and I can still get my knuckles to max out and hit the c-hub. Hope that helps. Here is a pic of the current setup (minus the mismatch tire/wheel set up lol) |
11-13-2012, 11:33 PM | #5 |
Pebble Pounder Join Date: Mar 2011 Location: Hollister, california
Posts: 103
|
Thanks that did help im going to get a longer servo horn.
|
01-25-2013, 09:24 PM | #6 |
Newbie Join Date: Mar 2005 Location: riverdale
Posts: 45
| Re: Turning radius?
Mine rubs the shocks if I turn to sharp
|
01-25-2013, 09:53 PM | #7 |
Quarry Creeper Join Date: Jan 2012 Location: Durango
Posts: 293
| Re: Turning radius? |
Turning radius? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turning radius? | stubs179 | Losi Mini-Rock Crawler | 4 | 12-14-2009 07:13 AM |
Turning radius | gunch | Duratrax Cliff Climber | 14 | 12-10-2009 08:52 PM |
Turning Radius | INFIHunter | Axial AX-10 Scorpion | 12 | 12-18-2007 04:04 PM |
Turning radius | PROTOTYPE | General Crawlers | 4 | 08-12-2007 09:36 PM |
turning radius | DumpsterRC | Newbie General | 1 | 03-29-2007 09:58 AM |
| |