Switching to 32p gear help

[throttlejock27]

Hey guys, I would like to switch my gearing to 32p so I don't have a problem latter down the road. Currently I'm running 48p 16/84 gears. What does that translate to for 32p gears? I would like to stay the same ratio as I have now. Thanks for the help

[Devil Inc]

56/11 would be a little faster or 56/10 would be a little slower.

[throttlejock27]

Originally Posted by Devil Inc

56/11 would be a little faster or 56/10 would be a little slower.

Great thanks, anyone running metal spur and pinions?

[ZippoMan]

I only run metal pinion. I have a Traxxas plastic 56T Spur and RR 14T pinion keeping it a stock ratio for now. 4:1. With the motor cover on this thing is quiet for 32P gears.

[throttlejock27]

having trouble finding 56/10 32p gears. Anyone know where I can get them online?

[chopan84]

DuraTrax Spur Gear 32P 56T Nitro Evader BX

Robinson Racing 32 Pitch Pinion Gear,10T

[throttlejock27]

Originally Posted by atown27

DuraTrax Spur Gear 32P 56T Nitro Evader BX

Robinson Racing 32 Pitch Pinion Gear,10T

Thanks a lot

[throttlejock27]

Does anyone know what the biggest tooth 32p spur will fit with the stock gear cover?

[ZippoMan]

I think 56T is close to being the biggest. Not too sure!! Buy a bigger one and find out, let us know, hehehe. Only money right??

[throttlejock27]

Originally Posted by ZippoMan

I think 56T is close to being the biggest. Not too sure!! Buy a bigger one and find out, let us know, hehehe. Only money right??

Yea I'm gonna order a 56t. Hope that fits, I would like to keep the cover on there to keep crap out of the gears.

[ZippoMan]

56T fits with cover, I know because that is what I run 56T/14T.

[Jacksprogis]

+1 for traxxas gears , Can't beat them for cheapness .
My ratio is 62/11 With a 10lbs wraith , 2 speed and Pro 4 on 3s .
Jack.

[Calderwood]

Originally Posted by throttlejock27

Yea I'm gonna order a 56t. Hope that fits, I would like to keep the cover on there to keep crap out of the gears.

60t fits if you sand one little spot inside the cover. i made mine fit before I realized my motor shaft doesn't fit behind the cover.

[throttlejock27]

Originally Posted by nigels_world

60t fits if you sand one little spot inside the cover. i made mine fit before I realized my motor shaft doesn't fit behind the cover.

Sounds good thanks, 56t will be fine then

[Postclanker]

did you ever find a metal 56t - 32p spur ???

[throttlejock27]

Originally Posted by Postclanker

did you ever find a metal 56t - 32p spur ???

I didn't really look for a Metal one. I just saw that there was some metal ones out there so I asked about them.

[Postclanker]

I certainly want one....actually a couple of them....heavy metal works for me

[k7zpj]

Originally Posted by Postclanker

I certainly want one....actually a couple of them....heavy metal works for me

Then look at the #7856 Robinson Racing Steel Slipper and the SuperShafty Beefy Top Shaft. Definitely Heavy Metal.

[Postclanker]

Originally Posted by k7zpj

Then look at the #7856 Robinson Racing Steel Slipper and the SuperShafty Beefy Top Shaft. Definitely Heavy Metal.

I'll check that out K7... Thanks for that
I'm really looking for a steel spur

Just searched that # does that fit an axial tranny ?

[k7zpj]

Originally Posted by Postclanker

I'll check that out K7... Thanks for that
I'm really looking for a steel spur

Just searched that # does that fit an axial tranny ?

Yes if you use the SuperShafty.com Beefy Top Shaft along with it.
WRAITH & AX-10 BEEFY Top Shaft - Super Shafty