09-04-2013, 04:12 PM | #1 |
Pebble Pounder Join Date: Dec 2009 Location: Vancouver, WA
Posts: 100
| Wraith with Stiffy kit.
Wanted to show off my long back Stiffy kit built by The DMG. I will probably include some other tech of the build once I get it finished as well. Sorry pictures aren't the best, iPhone is all I have though. Started with removing the unneeded plastic pieces. Then trimming the cage. Installed. Thanks for looking. Should have a roller soon. |
Sponsored Links | |
09-04-2013, 04:18 PM | #2 |
Rock Crawler Join Date: Aug 2010 Location: Esko
Posts: 640
|
Wow those look nice. Does it stiffen up the whole chassis alot?
|
09-04-2013, 04:27 PM | #3 |
Pebble Pounder Join Date: Dec 2009 Location: Vancouver, WA
Posts: 100
| Re: Wraith with Stiffy kit. |
09-04-2013, 04:33 PM | #4 |
Quarry Creeper Join Date: Jul 2013 Location: Maple Ridge B.C. Canada
Posts: 330
| Re: Wraith with Stiffy kit.
That looks so good hmmmmmmmmm
|
09-04-2013, 06:02 PM | #5 |
Quarry Creeper Join Date: Aug 2012 Location: Melbourne
Posts: 236
|
Hot
|
09-04-2013, 07:06 PM | #6 |
RCC Addict Join Date: Aug 2012 Location: The Garage!!!
Posts: 1,386
| Re: Wraith with Stiffy kit.
I got one in the works & can't wait to get my short sk!!! |
09-05-2013, 11:10 AM | #7 |
Pebble Pounder Join Date: Dec 2009 Location: Vancouver, WA
Posts: 100
| Re: Wraith with Stiffy kit. |
09-05-2013, 11:56 AM | #8 |
Pebble Pounder Join Date: May 2013 Location: Lees Summit
Posts: 139
| Re: Wraith with Stiffy kit.
Got mine a week ago. Fantastic craftsmanship. I'll get my vanquish links today and finally have mine running again.
|
09-05-2013, 12:15 PM | #9 |
RCC Addict Join Date: Aug 2012 Location: The Garage!!!
Posts: 1,386
| Re: Wraith with Stiffy kit.
Great start!!! |
09-05-2013, 04:33 PM | #10 |
Pebble Pounder Join Date: Dec 2009 Location: Vancouver, WA
Posts: 100
| Re: Wraith with Stiffy kit.
Works been slow today so plugging away on this. Electronics are in. MMP Tekin Redline 17.5 (for now, have a Pro4 3300kv that will go in it) Castle BEC 3s Lipo 5300 I don't think my DC Rubi Wraith body is going to work without cutting it up, and I do not want to cut it up. This rig sits very low and the tires rub horribly with any compression of the suspension. I think I will save it for something else I have plans to build. Wraith panels it is. After playin in the yard... oops. Bought this battery with my first SCX in 2009 so not to disappointing. It did me well. Thing is, battery works great and will take a charge, its just major puffed. Is it still good? I'm afraid to run it, don't want to burn my house down... Here is another look at the Stiffy. The obligatory flex shot Thanks for Looking. |
09-05-2013, 06:07 PM | #11 |
RCC Addict Join Date: Aug 2012 Location: The Garage!!!
Posts: 1,386
| Re: Wraith with Stiffy kit.
Rig is looking worthy, but the lipo is done!!! |
09-06-2013, 02:44 AM | #12 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Re: Wraith with Stiffy kit.
That looks plain awesome dude Jack. |
09-06-2013, 11:03 AM | #13 |
Pebble Pounder Join Date: Dec 2009 Location: Vancouver, WA
Posts: 100
| Re: Wraith with Stiffy kit. Kinda thought so. Thanks for the compliments all. Need to do some testing with my pro4 and another MMP I have before putting it in this rig. It was way glitchy when I tested it the first time, but I didn't take the time to put the Castle Link on the MMP. Hopefully I can get it working soon, then I can proceed to break everything else.
|
Wraith with Stiffy kit. - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
can i reuse the wraith VP chub and wraith VP knuckles on the SCX kit? | bikeboy | Axial Wraith | 4 | 06-26-2013 12:03 PM |
wraith rtr/builder kit , ax10 ridgecrest or scx10 kit hocho/dingo | xC Pirates | Newbie General | 9 | 06-09-2012 06:54 AM |
| |