05-31-2014, 02:18 PM | #1 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Just Another Wraith DMG style.... I have been out of the crawler scene for a couple years and really miss it. So I am building a Wraith from piecing it together. I have been collecting parts for about 4 months now and its ready to be built. I am trying to build it as cheap as possible, but man its hard to keep in budget... Parts that I am planning on building it with (I have most so far) -Stock Chassis and skid (planning on doing a DMG stump Stiffy Kit) -Ax10 locked trans, with Super Shafty motor plate -Mip drive shafts w/Traxxas grub screws at axle end -Vanquish Hurtz dig w/HiTech low profile servo -Vanquish titanium link set -Vanquish titanium steering links -Vanquish CMS kit -Vanquish chubs and knuckles -Vanquish OMF gunmetal/grey wheels 475 hubs -Axial universals -Axial esc for now -Holmes Hobbies Trail master Pro 27t motor -Savox 1230 servo -CC bec -Dinky RC hood -RC4WD MT Baja Claws -Crawler Innovations delrin electronics tray -Gmade Aeration shocks w/soft springs Here are some photos of it so far...still waiting on some parts... I cut body straight instead of the stock look... Dinky RC Hood ....Hood pins are Associated cap head screws ..I think its a much cleaner look then the big Traxxas posts..Just my opinion... Hurtz Dig..Tight fit with interior but with the low profile servo I have coming it shoud just fit..I hope... I cut a relief in the rear of the interior so it wouldn't have that big hole in the back, it will also have a Exo radiator in the back as well... Vanquish OMF Wheels...These things are sweet.... Vanquish CMS kit Last edited by briansbodies; 06-28-2014 at 10:04 AM. |
Sponsored Links | |
05-31-2014, 03:06 PM | #2 |
I wanna be Dave Join Date: Jan 2012 Location: CANADA
Posts: 2,648
| Re: Just Another Wraith
Very nice job!! One thing I would do is change around the drive shafts, have the male end up on the transmission side.
|
05-31-2014, 03:34 PM | #3 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith |
05-31-2014, 03:36 PM | #4 |
I wanna be Dave Join Date: Feb 2013 Location: NW Indiana
Posts: 3,196
| Re: Just Another Wraith
looks great brian!!!
|
05-31-2014, 03:47 PM | #5 |
RCC Addict Join Date: Dec 2012 Location: Crookston
Posts: 1,873
|
Looking good. Can't wait to see what you have planned for the paint job.
|
05-31-2014, 03:49 PM | #6 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith |
05-31-2014, 03:58 PM | #7 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith |
05-31-2014, 06:56 PM | #8 |
Quarry Creeper Join Date: Mar 2009 Location: mesa
Posts: 323
| Re: Just Another Wraith
looking good there Brian can't wait to see you back on the trail with us
|
05-31-2014, 10:43 PM | #9 |
Trying to have Fun Again Join Date: Apr 2006 Location: In your fridge stealing a beer
Posts: 2,923
| Re: Just Another Wraith
Looking Good Brian can't wait to see it all done.
|
06-01-2014, 12:45 AM | #10 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith |
06-04-2014, 06:39 PM | #11 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith Well I finally got the trany built...super shafty motor plate, VP hurtz dig, Low profile servo, 32pitch gears, and HH trail master 27t motor. I had to grind the servo case so the MIP drive shaft would clear... |
06-05-2014, 11:49 PM | #12 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith Okay...got it pretty much mocked up...still need to get it wired up and get a battery... I had to heat up the interior with a heat gun and mold the lexan so the dig shift arm would be able to move free...hard to see in pic but it turned out pretty good...once the seat and driver are in no one will see it.... Got a set of VP trusses .... Also got some RC4WD Baja Claws TTC tires. These things are tall, narrow, and very sticky. I love them!!! I am just using the stock foam for now...don't know what foam I want to use in them yet... Last edited by briansbodies; 06-07-2014 at 06:50 AM. |
06-08-2014, 05:41 AM | #13 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith Well I have been looking at all the fastback mods done on here, I had these links in my junk pile and came up with this...I want to get a DMG stiffy stump back someday, but I cant afford one yet... I had a extra exo engine piece and cut it up and am thinking of putting it in the rear cargo area... |
06-08-2014, 08:57 AM | #14 |
Rock Stacker Join Date: Sep 2013 Location: Simi Valley
Posts: 50
| Re: Just Another Wraith
The Exo motor out back is going to look great . Very nice build
|
06-08-2014, 10:31 AM | #15 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith |
06-08-2014, 06:13 PM | #16 |
I wanna be Dave Join Date: Sep 2007 Location: San Tan Valley
Posts: 4,267
| Re: Just Another Wraith
Looking good Brian, can't wait to see what you do for paint. |
06-08-2014, 06:33 PM | #17 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith |
06-09-2014, 06:01 AM | #18 |
Rock Stacker Join Date: Jun 2014 Location: Europe
Posts: 60
| Re: Just Another Wraith |
06-09-2014, 05:37 PM | #19 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith
Well I am sure its been done before, but thanks! It works great...
|
06-12-2014, 01:17 AM | #20 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| Re: Just Another Wraith
Got a start on my panels, still have to paint interior, back deck, engine, and wild willy driver...here is a progress pic... |
| |