|
| LinkBack | Thread Tools | Display Modes |
11-19-2015, 01:12 AM | #1 |
Pebble Pounder Join Date: May 2013 Location: new zealand
Posts: 132
| 1.9 wheels on vanquish steering knuckles?
just wanting to know if a 1.9 wheels will work with the vanquish scale steering hubs??? i want lower OD tires and 1.9's are the size i want but dont really want to put them on 2.2 wheels and have it look like its on 20's. thanks
|
Sponsored Links | |
11-19-2015, 02:23 AM | #2 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: 1.9 wheels on vanquish steering knuckles?
Yes they do I'm running 225 hubs, 19 vp bullys and Sxale wraith chubs and knuckle. Not sure about non vp wheels though. There i quite abit if clearance even with 225 hubs though.
|
11-19-2015, 10:28 AM | #3 |
Quarry Creeper Join Date: May 2011 Location: Battle Ground WA
Posts: 429
| Re: 1.9 wheels on vanquish steering knuckles?
Depends on the wheels and/or hubs if applicable to the wheels you're using.. For example my 2.2 Axial Trailready beadlocks need a 475 hub to barely clear the VP scale knuckles and with my stock width VP Methods I could probably get away with a 225 hub.
|
11-19-2015, 01:31 PM | #4 |
Pebble Pounder Join Date: May 2013 Location: new zealand
Posts: 132
| Re: 1.9 wheels on vanquish steering knuckles?
ok thanks for that i would prob just get some cheap arse 1.9 beadlocks of ebay if i go that way. i want 1.9 OD tire size and in the tread patterns you can in 1.9 because 2.2 are normally way to tall to look scale. i may just have to try my luck i thinkwith something fitting |
11-19-2015, 05:24 PM | #5 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: 1.9 wheels on vanquish steering knuckles?
Here's mine with kmc bullys. |
11-19-2015, 05:56 PM | #6 |
RCC Addict Join Date: May 2013 Location: Forrestfield, Western Australia
Posts: 1,082
| Re: 1.9 wheels on vanquish steering knuckles?
It is going to depend on the wheel & slw/hex you use but here are 2 examples I've got of mine with 1.9's & VP scale knuckles. First is my Wraith on 1.9's, TSS stockers, 350 slw hubs, thin scx10 hex Other is a comparison of clearance of 1.9 Locked-up Trail on 225 slw hubs, thicker Wraith hex. On right is scx10 with Axial high clearance knuckle, on left is AR60 with scale knuckle, same hub same hex on both. |
11-21-2015, 02:59 PM | #7 |
Pebble Pounder Join Date: May 2013 Location: new zealand
Posts: 132
| Re: 1.9 wheels on vanquish steering knuckles?
anyone know if the stock scx10 wheels will work?
|
11-21-2015, 04:34 PM | #8 |
I wanna be Dave Join Date: Jul 2013 Location: Minneapolis
Posts: 5,202
| Re: 1.9 wheels on vanquish steering knuckles?
They might. If not a thicker hex might fix the issue.
|
11-21-2015, 05:51 PM | #9 |
I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: 1.9 wheels on vanquish steering knuckles?
I had axial 8 holes on my 1.9 Wraith build with scale hubs and knuckles if that helps any. I did use thicker proline clamping hexes to help PitBull growlers clear with plenty of room.
|
11-22-2015, 03:28 PM | #10 |
Pebble Pounder Join Date: May 2013 Location: new zealand
Posts: 132
| Re: 1.9 wheels on vanquish steering knuckles?
ive brought some scx10 wheels/tires for a decent price so ill try my luck...if they dont wonk they will go onto another rc so no big loss if they dont work.
|
1.9 wheels on vanquish steering knuckles? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vanquish steering knuckles? | Crawler80 | Axial Yeti | 7 | 01-11-2015 07:51 PM |
vanquish XR-10 Incision Steering Knuckles and wheels | bikeboy | Axial XR10 | 35 | 03-07-2012 09:51 AM |
| |