Axial XR10 hop-up thread and vendors
 

Alright everyone,
Since there are a few vendors that offer hop-ups for the XR10, and it's hard to find the vendors sometimes, due to impatients lack of knowledge or just plain lazyness, lets start a thread that lists the add ons and where you can get them at. I know I'm missing a bunch but this is to just get us started. As you find stuff or venders as you make something add it on. This should help out, one the lazy, two the newbies, three the people that just get lost in all the other threads. "thumbsup"

Lower/upper links
T1E - www.T1ERC.com


-Delrin
Crawler Innovations - http://www.crawlerinnovations.com/
BWD delrin links - http://www.billet-works.com/
JPCustoms delrin links - http://www.jpcustomrcs.com/home.html

-Titanium
Chaotic Crawlers - http://www.chaoticcrawlers.com/XR-links.html

Aluminum motor plates/cases
Hot Racing - http://www.hot-racing.com/index.cgi?c=563
Vanquish Products -http://www.vanquishproducts.com/
Axial - http://www.axialracing.com/ftp/ax307..._anodized.html
Rc4wd -http://store.rc4wd.com/Axial-XR10-Tr...it_p_1326.html

Aluminum Chubs
Hot Racing -http://www.hot-racing.com/index.cgi?c=563
Vanquish Products -http://www.vanquishproducts.com/
Axial - http://www.axialracing.com

Aluminum Steering knuckles
Hot Racing -http://www.hot-racing.com/index.cgi?c=563
Vanquish Products - http://www.vanquishproducts.com/
Axial - http://www.axialracing.com

Aluminum Lock outs
Hot Racing - http://www.hot-racing.com/index.cgi?c=563
Vanquish Products -http://www.vanquishproducts.com/
Axial - http://www.axialracing.com

Chasis
Under Ground Crawlers -<CITE>http://www.undergroundcrawlers.com/viper.htm</CITE>
Hot Racing -http://www.hot-racing.com/index.cgi?c=563
Axial - http://www.axialracing.com[/COLOR]
Billet Works Designs - http://www.billet-works.com/home
[COLOR="blue"]T1E - www.T1ERC.com
Beetlejuice chassis - http://www.rccrawler.com/forum/showthread.php?t=276237

Steering rods
Not Lowes as my wife says!!!
Chaotic Crawlers (titanium Steering rod) - http://chaoticcrawlers.com/xr10-tierod-main.html

Larger bearing upgrades
Avid - http://www.avidrc.com/
Boca Bearings - http://www.bocabearings.com/


Steel Gears
Axial - http://www.axialracing.com/ftp/Axial...ned_Gears.html
RC4WD - http://store.rc4wd.com/
Hot Racing - http://www.hot-racing.com/index.cgi?c=563

battery mount
Rowdy Racing - http://www.rccrawler.com/forum/showthread.php?t=294266

Knuckle Wheights (Not Released Yet But Soon)
http://dlux.ecrater.com/c/1176511/rc-crawlers

Dig Controller
heyok - http://www.rccrawler.com/forum/members/heyok-12613.htm-
heyok's MOA Dig Controller for Three Position or Linear Channel - http://www.rccrawler.com/forum/vendors-electronics/300292-moa-dig-controller.html
heyok's MOA Dig Controller for Two Position Channel - http://www.rccrawler.com/forum/vendors-electronics/305782-moa-dig-controller-two-position-channel.html
losikid's Dual Esc Adapter-Dig, mixing, biasing, for MOST 3CH RADIOS - http://www.rccrawler.com/forum/vendors-electronics/307196-dual-esc-adapter-dig-mixing-biasing-most-3ch-radios.html

Kustom Skins for all the bodiless Chassis
Krawler Konceptz - http://www.rccrawler.com/forum/members/krawler-konceptz-34420.htm - http://www.rccrawler.com/forum/vendors-paint-body/279124-krawler-konceptz-skins.html

Motor Guards
Cruzin Illusion - http://www.rccrawler.com/forum/members/cruzin-illusion-26918.htm http://www.rccrawler.com/forum/vendors-electronics/265461-cruzin-illusions-moa-motor-skids.html


Spring cups - http://www.rccrawler.com/forum/chassis-suspension/287293-mini-t-cups-big-bore-spring-retainers.html He also makes them for the mini-t springs in thread page 11 $13.50 a set of 4

Shock cap -
Shock cap upgrade is made by CrazyOrigin
http://www.rccrawler.com/forum/chassis-suspension/276575-rod-end-shock-caps-done-right-way.html
$20 shipped us, $25 shipped international. Read the thread for questions. Don't PM him unless its not in the thread.

Good idea.


chassis
http://www.billet-works.com/home

battery mount
http://www.rccrawler.com/forum/showthread.php?t=294266

aluminun motor plate
Rc4wd offers the aluminum plate drilled out for bigger bearing and also a delrin cover that also uses bigger bearings.
The motor plate bearing are now 5x9x3 flanged bearing and the gear cover side is 5x10x4.
http://store.rc4wd.com/Axial-XR10-Tr...it_p_1326.html

Chassis
BWD makes a wedge chassis, high clearance links, DUB upeer plates, bomb proof shock mounts, delrein extended electronics tray
http://www.billet-works.com/bwd_xr-10_upgrades

Good Thinkin Lincoln "thumbsup"

Knuckle Wheights (Not Released Yet But Soon)
http://dlux.ecrater.com/c/1176511/rc-crawlers

Everything you could ever want.
http://www.vanquishproducts.com/xr10.html

X2 on the Crawler Innovations stuff it is top notch!!

Thanks Guys for adding a few more. Now come on ladies and gents I know there's more.

Chassis

T1E (www.T1ERC.com)

Lower links

T1E (www.T1ERC.com)


Bearings

Boca Bearings

Thanks. Keep them comming and I'll keep updating it...

Really like the look of the T1E Moonbuggy chasis. Thanks"thumbsup"

Do you have a link for the Boca Bearings?

I hope some of the vendors that I missed will jump on and say what they have for sale for the add ons.

Beetlejuice chassis
BWD delrin links
JPCustoms delrin links

Titanium upper and lower links will be coming any day now!!!"thumbsup"

They aren't on our site yet, but......

www.chaoticcrawlers.com

does anyone make motor guards??

x2!!!

Cruinnillusion or however you spell his name makes delrin motor guard"thumbsup"
I find energy shot bottles to be a good choice for motor protection.
My Redbull energy shot bottles keep my broods brush hoods well protected.

I make a Dig Controller for MOA axles. There are two versions:

MOA Dig Controller for Three Position or Linear Channel

MOA Dig Controller for Two Position Channel


http://i181.photobucket.com/albums/x...e/DSCN0720.jpg

Click for more details and wiring info.

We make Kustom Skins for all the bodiless Chassis "thumbsup"
http://www.rccrawler.com/forum/showthread.php?t=279124

Contact Cruzin Illusion here on the forum

I'm thinking that this would be a good thread to make sticky too.

Anyother vendors out there that we're missing?

Sticky? Please? :)