|
| LinkBack | Thread Tools | Display Modes |
07-09-2013, 03:32 PM | #1 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
| wrenchinrock's KR15 remedy build
so here we go i started this build for me and as it ends up im now building it for the pres of our group as i will be purchasing another remedy chassis very very soon so on to the parts list........ BDN remedy chassis cf upper links (homemade) aluminum lowers ( homemade) xr10 axles rc4wds gears vp chubs knucks axial alum lockouts hitec7955 tg servo ti drag link vp slw's brood apocalypse castle bec @w 7v tekin fxr's smashed futaba 4pl rx/tx axial scx10 alum shocks with machined pistons mini t springs and mrc springs mini quake bladders 20 wt shock oil jeepindoug spring cups we will be posting more pics soon as its almost running already just need to upload more pics! |
Sponsored Links | |
07-09-2013, 03:45 PM | #2 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
few more pics 3/16 ali rod ends buffed down and threaded to 5 mm drilled out traxxas 5347 rod ends with a 5/32 drill bit closest to 5mm i had works fine added a lil slow setting ca glue before putting ends on the cf was. 476 cf tube with drilled out 5347 rod ends |
07-09-2013, 03:51 PM | #3 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
after installing shocks and upper links to the axles i zip tied the links and axles to full smash @ 12.5 inches then bent my links to the chassis |
07-09-2013, 04:02 PM | #4 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
slapped the slws on her these are just mock up tires we will be wrappin these slw's with voodoos as soon as we figure out which compound it will be runnin definately have some shock limiting to do |
07-09-2013, 04:12 PM | #5 |
www.ottsix.com Join Date: Mar 2011 Location: Albuquerque, New Mexico USA
Posts: 2,050
| Re: wrenchinrock's KR15 remedy build
Looks killer...I WANT ONE TOO!
|
07-09-2013, 04:36 PM | #6 |
Pebble Pounder Join Date: Feb 2013 Location: Middleton, ID
Posts: 118
| Re: wrenchinrock's KR15 remedy build
I can't wait until this thing is rtr
|
07-09-2013, 05:50 PM | #7 |
Rock Crawler Join Date: May 2009 Location: just north of BFE in SC
Posts: 979
| Re: wrenchinrock's KR15 remedy build
Looking good man!! I do have my rears internally limited. I don't like my wheelbase to grow to much (next to none) or as close to it as possible. I don't know the length of the spacer BDN probable knows the length. I do know BDN has his front externally limited as well. |
07-09-2013, 07:39 PM | #8 |
RCC Addict Join Date: Apr 2012 Location: Williamsport, PA
Posts: 1,360
| Re: wrenchinrock's KR15 remedy build
That is one beautiful chassis right there. Looking forward to seeing more of this build and where you take it.
|
07-09-2013, 08:29 PM | #9 |
Its a HARDKNOCKZ Life... Join Date: Feb 2011 Location: Southern Kali...
Posts: 2,469
| Re: wrenchinrock's KR15 remedy build
Wow! I like this chassis! Very slick man. J.D. |
07-09-2013, 08:37 PM | #10 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
| Re: wrenchinrock's KR15 remedy build
WOW thanks guys this is my first ground up build so the props are very apreciated @ m energy i will for sure have to get with bdn on the shock limit dimensions am so excited to see this thing move i will be working on the fxr smash tonight cross my fingers it may be moving on its own power by tomorrow!!!!!! |
07-09-2013, 08:43 PM | #11 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
| Re: wrenchinrock's KR15 remedy build |
07-09-2013, 08:57 PM | #12 |
Pebble Pounder Join Date: Feb 2013 Location: Middleton, ID
Posts: 118
| Re: wrenchinrock's KR15 remedy build
I know.
|
07-10-2013, 02:26 AM | #13 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
It's alive it's alive pics on the rocks tomorrow folks pics and video coming to a town near u!!!!!!!!!!! :d:d:d
|
07-10-2013, 06:25 AM | #14 |
I wanna be Dave Join Date: Oct 2008 Location: Sumter
Posts: 6,141
| Re: wrenchinrock's KR15 remedy build
I like what you did with your rear lowers...the smooth radius bends look nice and should work really well on this truck. While you're limiting the shocks go ahead and dump out the 20wt and bump up to something much thicker. Might check with M_ENERGY to see what he's running now that the shock positions have changed slightly, but I do know that 20wt will be way too thin.
|
07-10-2013, 07:23 AM | #15 | |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
| Quote:
| |
07-10-2013, 12:51 PM | #16 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
well bad news ran a couple packs through it this morn got everything calibrated and adjusted take a nap after being up most of the night with this thang get up to go crawlin and whammo servo decides to take a big ol crap so back no crawlin pics till i get another servo :-(
|
07-10-2013, 01:24 PM | #17 |
Rock Crawler Join Date: May 2009 Location: just north of BFE in SC
Posts: 979
| Re: wrenchinrock's KR15 remedy build
Dang that sucks!! Get a 7950 You can play around with limiting the shocks for your personal preference. Depending how much overall height you want and how much compression which will limit your flex as well |
07-10-2013, 02:26 PM | #18 |
Rock Crawler Join Date: Aug 2010 Location: Martinique
Posts: 660
|
Really sucks !!! Was counting on your vids to dream on...
|
07-10-2013, 02:29 PM | #19 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
no worries im on my way to town gonna pick up a servo my buddy whiplashdjs has got a 7950 for me! !!! thanks derek:thumbup: should be crawlin tomorrow :cool: |
07-11-2013, 05:10 AM | #20 |
Pebble Pounder Join Date: May 2013 Location: willow
Posts: 172
|
well it lives again lol replaced servo but with a weaker axial servo until the 7950 comes in but hey its crawlin!!!!!!!
|
wrenchinrock's KR15 remedy build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
M_ENERGY's -- Remedy 3.5 | M_ENERGY | Axial XR10 | 255 | 07-14-2015 01:02 PM |
~53 Willys 2010 Comp Rig Build~ RC4WD MOA Worminator Build~ | 53 willys | General Crawlers | 108 | 11-28-2011 12:42 AM |
Could This Be The Real Clod Stall Remedy? | jeepfreek | Tamiya Clod Buster | 13 | 02-27-2008 11:59 AM |
Hub/knuckle popping issue remedy | 01TJay | General Crawlers | 11 | 09-20-2005 04:01 PM |
Found a spring remedy.... | wanabgts | General Crawlers | 1 | 08-22-2005 05:42 PM |
| |