what setups are yall running in yalls moa's

[gsrcivic]

Title says it I'm just looking to see what everyone runs....
Motors?
Esc? Single or dual?
Dig? (If running single)
Rx?
Tx?
Bec?
Wire? (If you can remember lol)
Connectors? (Which ones and were you have them at)

Thanks in advance guys

[tapped-out]

Holmes hobbies br-minis x2
Futaba 4PL
Holmes hobbies 16t red labeled motors x2
Micro deans
18g wire (I think)
Gen ace 450 3s lipo

[sam63]

Originally Posted by gsrcivic

Title says it I'm just looking to see what everyone runs....
Motors? Mamba monster 2650 kv on 6S
Esc? Single or dual? Single sidewinder micro to keep it lightweight
Dig? (If running single) Aint got no time for dig
Rx? n/a
Tx? why? just plug in and let it rip!
Bec? No need
Wire? (If you can remember lol) 20 GA to keep it lightweight
Connectors? (Which ones and were you have them at) Tamiya

Thanks in advance guys

Above in green is how I roll....yall.

In all seriousness, just go to the berg or xr10 build threads and check out what those guys are running. Bring your wallet$$$

[winnerone23]

HH 13t 500 puller's
Dual Br mini's
Airtronics rx
Airtronics MT-4
ALWAYS A BEC!!!!
use to run 16ga battery and 18ga motors but now all 16ga..
Mini black T connector's from HK..

[gsrcivic]

Originally Posted by winnerone23

HH 13t 500 puller's
Dual Br mini's
Airtronics rx
Airtronics MT-4
ALWAYS A BEC!!!!
use to run 16ga battery and 18ga motors but now all 16ga..
Mini black T connector's from HK..

U dont count LOL.....thanks for the truck again troy glad we worked things out

[winnerone23]

You wouldn't be asking this question if you didn't pass up on the MT-4 and rx, that could have come with the rig!!! ;)

Welcome! Enjoy.. Get some pics posted! Lol

Bump the thread, as the new owner!

[gsrcivic]

Originally Posted by winnerone23

You wouldn't be asking this question if you didn't pass up on the MT-4 and rx, that could have come with the rig!!! ;)

Welcome! Enjoy.. Get some pics posted! Lol

Bump the thread, as the new owner!

Pics when i have time you know how work is lol.....amd maybe i wouldnt but then again maybe i would....ive always love the threads in other sections of other peoples setups and couldnt find on for this section lol....and its bumped since u insisted

[sic1to]

HH mini's/cc bec smashed "by Troy"
HH 13t 500 pullers
4pl/decased rec
16/18g wiring
Ya cant go wrong with HH.

[Tossedman]

HH 16t Crawlmaster Pros
Dual Br mini's
Airtronics rx
Airtronics MT-4
CC BEC!
16ga battery and 16ga motors
Deans and Gens Ace 450 MAh battery
and Bully 2 axles!!

[Trubble]

Originally Posted by gsrcivic

Title says it I'm just looking to see what everyone runs....



Motors? Brood Foresakens, 35 turn, 10mm comms, CB20 magnets, HHK-R arm, standup brushes

Esc? Single or dual? Dual Holmes BR Mini(s)

Dig? (If running single)

Rx? Futaba R2104GF

Tx? Futaba 4PL

Bec? CC 10 amp BEC at 7.4 volts

Wire? (If you can remember lol) Dean's 12 ga.

Connectors? (Which ones and were you have them at) Battery / Traxxas connectors, motors / hardwired

Thanks in advance guys

Servo? Holmes Trailmaster BLS-HV400

Battery? G-Force 3S / 1300 mAh / 30C, or G-Force Elite 3S / 1300 mAh / 35C

[Purptr8r]

Mt4 or 4pks tx/rx
Hh br minis or sidewinder micros escs
Brood vapor hhk 35 or brood conflux hhk 40t motors
7950 or 7980 servos
Turnigy nanotech 350 mah 3s 65-130 c batteries
Cc bec set to 7.4 v
I have 4 pros and a super all built using mostly the same products

Sent from my iPhone using Tapatalk

[Savagethrash]

Motors? Novak rockstar 55t
Esc? Single or dual? M2Dig
Dig? Diggin hard.
Rx? Futuba something or other
Tx? 3PM
Bec? CC at the moment. It may go the way of the dodo with the issues I have
Wire? (If you can remember lol) Whatever the M2dig came with, 14 gauge?
Servo 7954SH
Connectors? Regular deans
Batteries 750 all the way to 2.2amp depending what I am doing

[mammoth]

Motors?35T Brood Stubbies
Esc? Single or dual? Dual Br mini's
Dig? (If running single)Not needed with dual esc's
Rx?2016GF Futaba
Tx?Futaba 4PL
Bec?Castle BEC set @ 8.4volts
Wire? (If you can remember lol)18ga. Deans I think
Connectors? (Which ones and were you have them at)Deans Ultra connector at the battery, motors hard wired no connectors (saves weight)

Hopefully this helps!

[SINister]

Motors - HH 35T Sport
Esc - 2x Sidewinder Micro
Dig - Dual ESC
Rx - Futaba (decased)
Tx - 4PL
Bec - CC
Wire - 16ga
Connectors - batt JST/motors hardwired

[mrG]

Motors? brood onslaught 45t
Esc? Single or dual? smashed fxr dual
Dig?
Rx? Futuba
Tx? 4pl
Bec? always CC
Wire? (If you can remember lol) TQ 13AWG, Yes 13
Servo brushless futaba
Connectors? Regular deans
Batteries 4s maxamps 430mah

[FLOKI-81]

Motors: 2x HH tourqemaster pro 35T
ESC`s : HH BR mini dual esc,,, The holms hold is a extreme good dragbreake, but uses alot off power
TX : Futaba 4PL
Rx : Futaba
Servo : Hitec 7950
BEC :CC 10amp
Connectors : Deans...

[LAY80N]

Motors: Built brood vapour 30T or HH 16T 500 puller
ESC`s : 2 x BR-Mini
TX : Flysky GT3B
Rx : Flysky 3ch
Servo : Hitec 7980 or OMG ST-BF30S
BEC :CC 10amp
Connectors : Deans on battery, bullets on motor wires.
Wire: 18ga
Battery: Nanotech 360mah 65C130

All electronics smashed and mounted on motor mount.

[cord4530]

Originally Posted by gsrcivic

Title says it I'm just looking to see what everyone runs....
Motors?
Esc? Single or dual?
Dig? (If running single)
Rx?
Tx?
Bec?
Wire? (If you can remember lol)
Connectors? (Which ones and were you have them at)

Thanks in advance guys

I've got Holmes 35T motors with two Tekin FXRs. I have the Futaba 4PK radio setup to do either front or rear dig. Love it!
-Dan

[crawlinghulls]

Esc? Dual fxr's
Motors? Holmes Crawlmaster Expert 13t
tx/rx? Futaba 4pl
Bec? CC
Wire? TQ 18 ga
Connectors? Deans
Servo? Futaba S9157

[Hittman]

Motors 35t brood stubbies with the goods
Esc dual sidewinder micros
Rx Futaba 2106gf
Tx futaba 4pls
BEC castle 10a
Wire 18g
Connectors micro deans