Dasco's xr10 build

[dasco]

Let me start off by thanking a few people

Nerby149 :Upper and lower 149RcWorx titanium links and sound advice ..also a new set of 1/8 ti links soon to arrive

Snapon boy : helping me make connections "team driver" and the K.B. tuner pistons

Brc : awesome carbon fiber chassis AMX rambler and electronics mount and a back up topper

Dlux Fab: knuckles & weights, spring cups, big bore shock mounts. FBA xr10 axles...Very nice parts in general

Rcbros : sweet set of carbon fiber 3 prices wheels and hardware and awesome set of clear Egressor shocks pre built with all the goodies...stands by his products too!!!

Crawler innovations: double duce narrow foams comp cut S. Front M. Rear

Ey designs : very clean narrowed voodoo pins F. R.

Purptr8r : ultra narrow silver F. And ultra narrow blue R. Attention to detail and super fast...like 28 minutes to do a set!!! Gotta be a record..lol

winnerone23 : awesome advice on my mt4 and general cool cat

Crawler Bob : custom titanium rear axle shafts ..thicker and lighter than stock

Krazedbuilds : carbon fiber big bearing plates F.R. and tuner pistons also some seriously sound suspension advice

Holmes hobbies : 5 slot 13t matched puller motors..very clean and precise...(thanks Erin)

And me for a few little things I'll mention during the build lol

Pics soon to come

Here is the xr I started with

Here is what it has become



Sent from my SM-G930T using Tapatalk

[snapon boy]

Very nice sounding rig! Pictures!

149 r/c worx's Team Driver

[dasco]

Here is the chassis (BRC) and links (149) pre shipment..I was so eager to get this beautiful jewellery..lol. it was worth the wait

Sent from my SM-G930T using Tapatalk

[dasco]

Wanted more ground clearance so I decided to do a front axle in the rear..this means grinding on the rear shafts a little and getting a front upper shaft . I figured I would use titanium to keep the weight down. I was pleasantly surprised to find a set of light weight gears already installed by the previous owner....score!!!

Sent from my SM-G930T using Tapatalk

[dasco]

In an effort to get the weight down a little more I went with krazedbuilds carbon fiber motor plates..bigger bearings as well!!!

Sent from my SM-G930T using Tapatalk

[snapon boy]

Looks very good so far! I'm jealous I didn't get a braclet for Robbob! Lol.

149 r/c worx's Team Driver

[Fun4All]

Thanks for the invite, subscribed to follow this build. I may have to plagiarize a few ideas for my build.

[dasco]

Originally Posted by Fun4All

Thanks for the invite, subscribed to follow this build. I may have to plagiarize a few ideas for my build.

I'm OK with that fun..I basically used bits and pieces of others threads to build mine. It's done now...well close to done there are a few things I still want to do. It is up and running ready for testing

Sent from my SM-G930T using Tapatalk

[dasco]

I'm also trying to do a step by step so I will be adding pictures and brief descriptions in the evenings

Sent from my SM-G930T using Tapatalk

[dasco]

A pic of the rear finished up and put back together..added VP front upper link mount (minus the servo mount) and VP xr10 lockouts also clocked the lockouts for more clearance

The motor saver in the pic is my own creation super light but not as slick as I wanted it. I cure that later in the build

Sent from my SM-G930T using Tapatalk

[Curcal]

5 hour energy bottles are great motor savers... a hard and fairly slick plastic.

[tapped-out]

Originally Posted by Curcal

5 hour energy bottles are great motor savers... a hard and fairly slick plastic.

X2 that's what I run on my motors


Remove label and find the 2 seams in bottle and cut in 2 pieces.


Use double sided tape (servo tape) and stick on your motors.. trim as needed

[dasco]

That's a great idea!! Is there any in black..lol. I'm trying to go with a carbon fiber theme or murdered out look...I've also heard 35mm film cans work really well

Sent from my SM-G930T using Tapatalk

[dasco]

Now to the front axle ..I'm not sure who makes the gears but a friend told me they are the ones people are looking for. Pretty happy about that!!! They are a greyish brown hardened steel and at some point I may do lightened gears. Also installed the Brc carbon fiber electronic plate...super light and does the trick...c.f.




I put in an order from Erik at Dlux for some FBA axles and like always they are very nice. Also had him send me a set of his xr10 knuckles and slugs. Thanks Erik!! This rig came with VP chubs. So no need to do anything there. I made a battery mount out of some .040 lexan . Not sure who makes the servo mount but it's aluminum so I'll use it for now.




I had smashed micro sidewinders in in this pic but have since went to smashed fxr's after frying an F.E.T. on a 3 slot 13t setup.....yikes major wheel speed and heat


Sent from my SM-G930T using Tapatalk

[dasco]

Forgot to mention I made the custom servo guard myself out of some really thin carbon fiber

Sent from my SM-G930T using Tapatalk

[dasco]

Here is a pick of the current front setup with VP upper link mount and the lexan battery mount

Sent from my SM-G930T using Tapatalk

[dasco]

On to the wheels. I looked at several different options and decided to use the Rcbros 3 piece carbon fiber wheels...light and strong...did I say I love carbon fiber...lol!









Sent from my SM-G930T using Tapatalk

[dasco]

Last pic for the night...more tomorrow. If you guys don't know who AvE is on YouTube look him up...he is funny as hell...notice the **** hair ruler on the right. Sorry to get off track but I though you guys could use a laugh



Sent from my SM-G930T using Tapatalk

[tapped-out]

Originally Posted by dasco

That's a great idea!! Is there any in black..lol. I'm trying to go with a carbon fiber theme or murdered out look...I've also heard 35mm film cans work really well

Sent from my SM-G930T using Tapatalk

You can find them in black.

[dasco]

Thanks for the info tapped out ..I'll see what I can find .I had to kick the energy drink habit..they where making my OCD flare up..lol

Sent from my SM-G930T using Tapatalk