10-21-2015, 08:51 PM | #1 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| ARSone24's Yeti
Well I figure my Yeti is descent enough to post now. It has most of the standard mods. Hopefully by the end of the year ill have the HH540xl with an MMP Im just waiting for a xmas sale or something. The front end consists of RPM arms cheap Ebay aluminum castor blocks and shock tower with GPM tie rods. I just installed a full Blue monkey cvd MIP setup which required shaving of the RPM arms. Still thinking about which way I want to go to mount the shocks. The rear consists of MIP rear shaft. SSD rear axle and lower arms. Vanquish upper trailing arms and the SSD 2spd. Probably leaving some stuff out. On to the pics! The last pic is the current state with all the panels. |
Sponsored Links | |
10-22-2015, 05:51 AM | #2 |
Quarry Creeper Join Date: Feb 2015 Location: Florida
Posts: 346
| Re: ARSone24's Yeti
Nice Yeti, looks to be a pretty much bullet proof drive train. Should handle the puller pro xl no problem.
|
10-22-2015, 11:09 AM | #3 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| Re: ARSone24's Yeti
Thanks its getting there, def no where near some of you guys. I still have to think about wheels after the motor upgrade.
|
10-25-2015, 01:34 AM | #4 |
Newbie Join Date: Sep 2015 Location: Niederkassel
Posts: 2
| Re: ARSone24's Yeti
Hi I have the same blue monkey thing in front ! Do you have some pics after finished mounting? Thanks mike Gesendet von iPad mit Tapatalk |
10-25-2015, 01:38 PM | #5 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| Re: ARSone24's Yeti
Yes. If your wondering, there's a lot of grinding of the rpm arms and you have to mount the shock in front of the arms. Last edited by ARSone24; 10-25-2015 at 05:36 PM. |
10-26-2015, 03:08 PM | #6 |
Newbie Join Date: Sep 2015 Location: Niederkassel
Posts: 2
| Re: ARSone24's Yeti
Thanks for your pics! I am still building!:-) how is the performance from your shock after mount in front of the arms? Same good like before? You have stock springs? What kind of oil are you using? Thanks mike Gesendet von iPhone mit Tapatalk |
10-26-2015, 05:46 PM | #7 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| Re: ARSone24's Yeti Im still dialing it in, the spring are the super firm blue springs. Haven't had a chance to take it to the trails yet but it def. crawls up things better.
|
11-11-2015, 05:23 PM | #8 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| ARSone24's Yeti
So I've decided to bite the bullet and this came in. I can't wait to see how it performs. |
11-20-2015, 06:38 AM | #9 |
Rock Stacker Join Date: Nov 2009 Location: Santa Rosa, CA
Posts: 86
| Re: ARSone24's Yeti
Looking sharp! What body panels and roof rack did you go with? Sent from my iPad using Tapatalk |
11-20-2015, 09:04 PM | #10 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| Re: ARSone24's Yeti
The side panels are carter fab, the roof and hood are from AMF racing bought on EBay and the rack is a gear head from RPP. Also got the new electronics installed!! Still haven't driven yet, family duties come first. Last edited by ARSone24; 11-20-2015 at 09:07 PM. |
11-23-2015, 08:16 AM | #11 |
Rock Stacker Join Date: Jun 2015 Location: SoCal
Posts: 75
| Re: ARSone24's Yeti
How are the gpm turnbuckles holding up? I was eyeing those for my yeti
|
11-23-2015, 05:40 PM | #12 |
Rock Stacker Join Date: May 2015 Location: Riverview-FL
Posts: 81
| Re: ARSone24's Yeti |
ARSone24's Yeti - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Yeti, Set, GO!!! FastEddy Bearings for the Axial Yeti | FastEddy | Axial Yeti | 13 | 04-21-2015 07:33 AM |
| |