RCCrawler Forums

STANG KILLA SS · 06-30-2016, 11:38 AM

Yet another first of its kind original product from The Scale Shop. One piece scale brass knuckles for the original SCX10 axles. Adds weight down low and at the ends of the axle to keep your rig planted without adding rotational mass.
Shown with Axial brand housings, C's, and CVDs.

Features 4mm thick high steer zero ackerman arms with gussets and two mount holes for the ultimate in strength, steering, options, and clearance.

Paint-able for scale looks. Extremely tight tolerances for zero slop.

Designed to mimic full scale fabricated/welded knuckles.

Shown with SSD brand D60 housings, C's, and CVDs.

Help plant your rig and make it more stable by moving the weight outward with more leverage vs brass tubes, yet without the rotational mass of wheel weights. Clears just about any 1.9 wheel.

SORRCA legal
Weight:
TSS Brass Knuckles- 1.565 oz each
VP Knuckles- 0.3 oz each

TSS SCX10 Brass Knuckles
$39 + Shipping
Order Here: Knuckles -

SCX2 Knuckles coming soon!

STANG KILLA SS · 07-01-2016, 09:16 AM

did a little mockup showing the difference in balance between TSS Brass Knuckles and a brass tube.
The knuckles do a great job of keeping your rig planted

Left: TSS Brass Knuckle, Aluminum C
Right: Brass Tube, Aluminum C and Knuckle

jeeprc · 07-01-2016, 12:32 PM

Quote:

Originally Posted by STANG KILLA SS

did a little mockup showing the difference in balance between TSS Brass Knuckles and a brass tube.
The knuckles do a great job of keeping your rig planted

Left: TSS Brass Knuckle, Aluminum C
Right: Brass Tube, Aluminum C and Knuckle

So when are the SCXII knuckles coming out Cory?

Sent from my iPhone using Tapatalk

STANG KILLA SS · 07-01-2016, 12:40 PM

few months

Jabird · 07-03-2016, 07:46 PM

Any plans to make a set for the 8 degree c-hubs?

STANG KILLA SS · 07-04-2016, 08:49 AM

not currently. but after then SCX2 and wraith, who knows, we may revisit.

STANG KILLA SS · 07-08-2016, 09:12 AM

Customer Pic:
Thanks Andy!

STANG KILLA SS · 07-08-2016, 09:57 AM

Customer Pic:
Thanks Brad!

STANG KILLA SS · 07-08-2016, 12:33 PM

Customer Pic:
Thanks Rector!

Quote:

Got my on lastnight. Fit really good. They fit tighter than my previous high steer knuckles with no slop brass bushings

Shinjari · 07-08-2016, 01:05 PM

Whats the wheel clearance like with these? I know with the VP 8* knuckles typically you have to run a 350 slw hub or with stock axial wheels you run the wide hex to clear the arm. Will that be similar with these?

STANG KILLA SS · 07-08-2016, 01:24 PM

knuckle clearance is as good as any knuckle out there.
however arm clearance will be the same as any zero ackerman high steer arm. we did shorten the arms a hair to help with this though. plus added the inner hole to help the steering tierod clear the tire sidewall. which is the tightest point on a zero ackerman arm.

clearance will be the same as a VP high steer Zero ackerman knuckle.(ie 8 degree) ours will have slightly better clearance due to the shorter arm.

this is the only pic i have on my phone right now.
this is a 1.9 (.85 wide) with 225 hub, and narrow 5mm SCX hex.

ie the narrowest setup available.
unfortunatly the arm is just out of view.

nerby149 · 07-08-2016, 06:59 PM

Here's a pic of mine all painted, may want to note in your original note in its own spot that these do not work with 8* c hubs.

"GOD SPEED"

STANG KILLA SS · 07-08-2016, 09:58 PM

Customer pics

Quote:

Originally Posted by tda271

You guys make an awesome product, and shipped just in time for my comp this weekend. Thanks again

Sent from my SAMSUNG-SM-G890A using Tapatalk

poncho_ponch · 07-09-2016, 10:22 AM

Great fit!

Ltd.yfz · 07-12-2016, 06:34 PM

These are on my want list

STANG KILLA SS · 07-13-2016, 03:39 PM

Customer pic:
Thanks Brad!

Fixmy59bug · 07-15-2016, 10:15 PM

Cory,

What am I doing wrong here?

I installed the Brass Knuckles on my SCX10 and I have some SERIOUS amounts of toe in.

I'm pretty sure I did everything right. I did change the chubs to some STRC pieces, but even with the original plastic chubs on the outcome is the same.

The only variable is the knuckles. Do these require a different steering setup?

Di_Spencer · 07-16-2016, 07:29 AM

Quote:

Originally Posted by Fixmy59bug

Cory,

What am I doing wrong here?

I installed the Brass Knuckles on my SCX10 and I have some SERIOUS amounts of toe in.

I'm pretty sure I did everything right. I did change the chubs to some STRC pieces, but even with the original plastic chubs on the outcome is the same.

The only variable is the knuckles. Do these require a different steering setup?

Yes you will need a different steering link because of the 0 Ackerman design.

Sent from my SM-G920T using Tapatalk

dubAron · 07-16-2016, 08:25 AM

Perfect fit on the SSD D60 axle great job TSS!

Fixmy59bug · 07-16-2016, 09:03 AM

Quote:

Originally Posted by Di_Spencer

Yes you will need a different steering link because of the 0 Ackerman design.

Damn... Wish I knew that when I bought it. Now I have to wait longer.

Any suggestions?

06-30-2016, 11:38 AM	#1
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	~TSS~ SCX10 Brass Knuckles Yet another first of its kind original product from The Scale Shop. One piece scale brass knuckles for the original SCX10 axles. Adds weight down low and at the ends of the axle to keep your rig planted without adding rotational mass. Shown with Axial brand housings, C's, and CVDs. Features 4mm thick high steer zero ackerman arms with gussets and two mount holes for the ultimate in strength, steering, options, and clearance. Paint-able for scale looks. Extremely tight tolerances for zero slop. Designed to mimic full scale fabricated/welded knuckles. Shown with SSD brand D60 housings, C's, and CVDs. Help plant your rig and make it more stable by moving the weight outward with more leverage vs brass tubes, yet without the rotational mass of wheel weights. Clears just about any 1.9 wheel. SORRCA legal Weight: TSS Brass Knuckles- 1.565 oz each VP Knuckles- 0.3 oz each TSS SCX10 Brass Knuckles $39 + Shipping Order Here: Knuckles - SCX2 Knuckles coming soon! Last edited by STANG KILLA SS; 09-10-2017 at 08:15 AM.

07-01-2016, 09:16 AM	#2
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles did a little mockup showing the difference in balance between TSS Brass Knuckles and a brass tube. The knuckles do a great job of keeping your rig planted Left: TSS Brass Knuckle, Aluminum C Right: Brass Tube, Aluminum C and Knuckle Last edited by STANG KILLA SS; 09-10-2017 at 08:14 AM.

07-01-2016, 12:40 PM	#4
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles few months

07-03-2016, 07:46 PM	#5
Jabird Newbie Join Date: Apr 2014 Location: Trussville Posts: 46	Re: ~TSS~ SCX10 Brass Knuckles Any plans to make a set for the 8 degree c-hubs?

07-04-2016, 08:49 AM	#6
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles not currently. but after then SCX2 and wraith, who knows, we may revisit.

07-08-2016, 09:12 AM	#7
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles Customer Pic: Thanks Andy!

07-08-2016, 09:57 AM	#8
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles Customer Pic: Thanks Brad!

07-08-2016, 01:05 PM	#10
Shinjari RCC Addict Join Date: Apr 2011 Location: San Diego Posts: 1,630	Re: ~TSS~ SCX10 Brass Knuckles Whats the wheel clearance like with these? I know with the VP 8* knuckles typically you have to run a 350 slw hub or with stock axial wheels you run the wide hex to clear the arm. Will that be similar with these?

07-08-2016, 01:24 PM	#11
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles knuckle clearance is as good as any knuckle out there. however arm clearance will be the same as any zero ackerman high steer arm. we did shorten the arms a hair to help with this though. plus added the inner hole to help the steering tierod clear the tire sidewall. which is the tightest point on a zero ackerman arm. clearance will be the same as a VP high steer Zero ackerman knuckle.(ie 8 degree) ours will have slightly better clearance due to the shorter arm. this is the only pic i have on my phone right now. this is a 1.9 (.85 wide) with 225 hub, and narrow 5mm SCX hex. ie the narrowest setup available. unfortunatly the arm is just out of view. Last edited by STANG KILLA SS; 07-08-2016 at 02:21 PM.

07-08-2016, 06:59 PM	#12
nerby149 "GOD SPEED" Join Date: Oct 2014 Location: Wouldn't you like to know Posts: 685	Re: ~TSS~ SCX10 Brass Knuckles Here's a pic of mine all painted, may want to note in your original note in its own spot that these do not work with 8* c hubs. "GOD SPEED"

07-09-2016, 10:22 AM	#14
poncho_ponch Rock Stacker Join Date: Apr 2009 Location: elp Posts: 55	Re: ~TSS~ SCX10 Brass Knuckles Great fit!

07-12-2016, 06:34 PM	#15
Ltd.yfz Pebble Pounder Join Date: Jul 2016 Location: Eugene Posts: 132	Re: ~TSS~ SCX10 Brass Knuckles These are on my want list

07-13-2016, 03:39 PM	#16
STANG KILLA SS ~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX Posts: 10,056	Re: ~TSS~ SCX10 Brass Knuckles Customer pic: Thanks Brad!

07-15-2016, 10:15 PM	#17
Fixmy59bug Newbie Join Date: May 2015 Location: Henderson Posts: 10	Re: ~TSS~ SCX10 Brass Knuckles Cory, What am I doing wrong here? I installed the Brass Knuckles on my SCX10 and I have some SERIOUS amounts of toe in. I'm pretty sure I did everything right. I did change the chubs to some STRC pieces, but even with the original plastic chubs on the outcome is the same. The only variable is the knuckles. Do these require a different steering setup?

07-16-2016, 08:25 AM	#19
dubAron RCC Addict Join Date: Nov 2008 Location: Santa Fe, NM Posts: 1,265	Re: ~TSS~ SCX10 Brass Knuckles Perfect fit on the SSD D60 axle great job TSS!

Sponsored Links

~TSS~ SCX10 Brass Knuckles - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E.Y. Designs Brass MRC/Slickrock Knuckles	EverettY	Axles, Trannys, T-case	1	12-23-2017 02:23 PM
chassis idea...brass knuckles?	gotajeep	Redcat Crawlers	9	02-08-2013 01:02 PM

RCCrawler Forums

Thread: ~TSS~ SCX10 Brass Knuckles