RCCrawler Forums

travis c. · 06-28-2014, 08:03 AM

I'll bring mine today if that's your concern. Otherwise, return it for something else.

minicrawlerguy530 · 06-28-2014, 09:54 PM

I have had the charger for a while now. And does anyone have an aluminum scx10/ax10 3 link mount they wouldn't mind selling or trading? It looks like this

nismortrd · 06-28-2014, 10:21 PM

I got one or two

minicrawlerguy530 · 06-29-2014, 02:29 AM

Yeah I definitely need one lol. That is the 2nd one I have broken

minicrawlerguy530 · 06-29-2014, 02:50 AM

How much for one Justin?

nismortrd · 06-29-2014, 03:52 AM

I don't know lol how's 5 bucks ?

minicrawlerguy530 · 06-29-2014, 10:50 AM

That sounds good to me.

W1ck3d0n3 · 06-30-2014, 10:16 AM

I know there probably a million treads on how to make a pan heard bar. So can any one pm a link to one cause I can't find one.

Sent from my XT1058 using Tapatalk

travis c. · 06-30-2014, 12:28 PM

8/32 allthread sleeved with stainless. Figure out the length you need, cut the allthread, install rod ends on allthread and bolt it up to yer rig.

Also, it should be as close as possible to the length and angle of your drag link or you will have bump steer.

travis c. · 07-01-2014, 07:54 AM

Attention Nismotrd, your PM box is full, I tried to PM ya but it wouldn't go through. I still have that MIP shaft if you need it, I think I said $20.

Rastaman · 07-08-2014, 08:33 AM

What's up NorCal crawlers, I've been away for awhile, looking to maybe go crawling with some of you soon, bald rock,upper park..
Alex you got back into it too? Didn't you sell your rigs? Mine have been sitting but are ready for action whenever..
Travis good to see you at amain, let's go crawling...

travis c. · 07-09-2014, 08:40 PM

Yeah, good runnin into you too Rob, haven't seen ya in a while.

I'm always up for a good crawling trip, we need to find some new places too!

minicrawlerguy530 · 07-10-2014, 08:15 PM

Hey rob!!!!!! No I still got one. The other is in pieces. I am fighting battery charger issues right now. How have you been?

W1ck3d0n3 · 07-12-2014, 05:36 PM

I got a question, dose anyone have a case for a hitec hs-645mg servo? I broke one side of the mounts where it screws into the mounts on the servo plate.

minicrawlerguy530 · 07-13-2014, 12:29 PM

I'm pretty sure I have a case SOMEWHERE lol

W1ck3d0n3 · 07-13-2014, 12:43 PM

If u do let me know and we can meet up some where

Rastaman · 07-17-2014, 08:22 AM

Travis, Alex, let's find some new spots, anywhere near some water would be good.. Feather river somewhere? Lake Oroville is so low there has to be some good exposed areas..

travis c. · 07-17-2014, 08:41 AM

I heard there's some cool stuff down at Nelson's Bar seeing as the water is so low. I might stop by there on my way back from Oroville this morning to scope it out. I'll post up later with an update.

I totally agree, we need some new crawl spots!

Big Geo took me out to an awesome crawl spot a while back, takes a while to get there, but it's off the hook. We went up to Stirling City and took the turn to Merlot Park. From there it's about 40 minutes of fire roads, across the Feather river and through the woods. When we went, the water was still a little too high, but tons of granite and a family of bears, saw four the day we went. The water should be lower now but ya never know till ya get there.

travis c. · 07-17-2014, 05:10 PM

Holy crap!!!! The lake is so fawking low that Nelson's Bar should be renamed Nelson's Canyon..................Yes, there's stuff to crawl there!

minicrawlerguy530 · 07-17-2014, 06:43 PM

Hell yeah we do. And mY new roommate has a crawler too.

06-28-2014, 08:03 AM	#1021
travis c. I wanna be Dave Join Date: Nov 2009 Location: Chico now Posts: 2,384	Re: paradise magalia crawlers I'll bring mine today if that's your concern. Otherwise, return it for something else.

06-28-2014, 09:54 PM	#1022
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers I have had the charger for a while now. And does anyone have an aluminum scx10/ax10 3 link mount they wouldn't mind selling or trading? It looks like this

06-29-2014, 02:29 AM	#1024
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers Yeah I definitely need one lol. That is the 2nd one I have broken

06-29-2014, 02:50 AM	#1025
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers How much for one Justin?

06-29-2014, 10:50 AM	#1027
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers That sounds good to me.

06-28-2014, 10:21 PM	#1023
nismortrd Newbie Join Date: Mar 2014 Location: paradise Posts: 40	I got one or two

06-29-2014, 03:52 AM	#1026
nismortrd Newbie Join Date: Mar 2014 Location: paradise Posts: 40	I don't know lol how's 5 bucks ?

06-30-2014, 10:16 AM	#1028
W1ck3d0n3 Quarry Creeper Join Date: Apr 2013 Location: Oroville Posts: 376	I know there probably a million treads on how to make a pan heard bar. So can any one pm a link to one cause I can't find one. Sent from my XT1058 using Tapatalk

06-30-2014, 12:28 PM	#1029
travis c. I wanna be Dave Join Date: Nov 2009 Location: Chico now Posts: 2,384	Re: paradise magalia crawlers 8/32 allthread sleeved with stainless. Figure out the length you need, cut the allthread, install rod ends on allthread and bolt it up to yer rig. Also, it should be as close as possible to the length and angle of your drag link or you will have bump steer.

07-01-2014, 07:54 AM	#1030
travis c. I wanna be Dave Join Date: Nov 2009 Location: Chico now Posts: 2,384	Re: paradise magalia crawlers Attention Nismotrd, your PM box is full, I tried to PM ya but it wouldn't go through. I still have that MIP shaft if you need it, I think I said $20.

07-08-2014, 08:33 AM	#1031
Rastaman Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon Posts: 487	Re: paradise magalia crawlers What's up NorCal crawlers, I've been away for awhile, looking to maybe go crawling with some of you soon, bald rock,upper park.. Alex you got back into it too? Didn't you sell your rigs? Mine have been sitting but are ready for action whenever.. Travis good to see you at amain, let's go crawling...

07-09-2014, 08:40 PM	#1032
travis c. I wanna be Dave Join Date: Nov 2009 Location: Chico now Posts: 2,384	Re: paradise magalia crawlers Yeah, good runnin into you too Rob, haven't seen ya in a while. I'm always up for a good crawling trip, we need to find some new places too!

07-10-2014, 08:15 PM	#1033
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers Hey rob!!!!!! No I still got one. The other is in pieces. I am fighting battery charger issues right now. How have you been?

07-12-2014, 05:36 PM	#1034
W1ck3d0n3 Quarry Creeper Join Date: Apr 2013 Location: Oroville Posts: 376	I got a question, dose anyone have a case for a hitec hs-645mg servo? I broke one side of the mounts where it screws into the mounts on the servo plate.

07-13-2014, 12:29 PM	#1035
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers I'm pretty sure I have a case SOMEWHERE lol

Sponsored Links

paradise magalia crawlers - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NCVRCC Comp #1----Magalia----October 2nd	-w-designs	Competitions	59	04-22-2012 02:51 PM
Who all lives in paradise or magalia ca	89lxmorepower	California	4	04-18-2012 01:09 PM
Who all lives in paradise or magalia ca	89lxmorepower	Chit Chat	2	11-09-2011 01:27 AM
NCVRCC Magalia Comp.....February 6th 2010	-w-designs	Competitions	120	02-09-2010 04:33 PM
NCVRCC Magalia Comp.....Results 2/6/2010	-w-designs	Competition Results	0	02-07-2010 05:09 PM

07-13-2014, 12:43 PM	#1036
W1ck3d0n3 Quarry Creeper Join Date: Apr 2013 Location: Oroville Posts: 376	If u do let me know and we can meet up some where

07-17-2014, 08:22 AM	#1037
Rastaman Quarry Creeper Join Date: Mar 2013 Location: Feather river canyon Posts: 487	Re: paradise magalia crawlers Travis, Alex, let's find some new spots, anywhere near some water would be good.. Feather river somewhere? Lake Oroville is so low there has to be some good exposed areas..

07-17-2014, 08:41 AM	#1038
travis c. I wanna be Dave Join Date: Nov 2009 Location: Chico now Posts: 2,384	Re: paradise magalia crawlers I heard there's some cool stuff down at Nelson's Bar seeing as the water is so low. I might stop by there on my way back from Oroville this morning to scope it out. I'll post up later with an update. I totally agree, we need some new crawl spots! Big Geo took me out to an awesome crawl spot a while back, takes a while to get there, but it's off the hook. We went up to Stirling City and took the turn to Merlot Park. From there it's about 40 minutes of fire roads, across the Feather river and through the woods. When we went, the water was still a little too high, but tons of granite and a family of bears, saw four the day we went. The water should be lower now but ya never know till ya get there. Last edited by travis c.; 07-17-2014 at 09:09 AM.

07-17-2014, 05:10 PM	#1039
travis c. I wanna be Dave Join Date: Nov 2009 Location: Chico now Posts: 2,384	Re: paradise magalia crawlers Holy crap!!!! The lake is so fawking low that Nelson's Bar should be renamed Nelson's Canyon..................Yes, there's stuff to crawl there!

07-17-2014, 06:43 PM	#1040
minicrawlerguy530 Quarry Creeper Join Date: Dec 2011 Location: Willows Posts: 436	Re: paradise magalia crawlers Hell yeah we do. And mY new roommate has a crawler too.

RCCrawler Forums

Thread: paradise magalia crawlers