RCCrawler Forums

1tom2go · 01-12-2007, 11:42 AM

I have put shims between the motor and motor mount to make the pinion hit the spur well.

nandez11 · 01-12-2007, 12:03 PM

I wish I could do a snow run this weekend, I could probably get out to Beals this sunday though. I will also be out there on sunday the 21st. Can't wait to meet some of your guys.

Bil C-- I was wondering if you are the guy that lives across the street from the "white house" . I don't want to say the road but I think I know where your at. I use to live across the street from ponderosa. Also Do you know Cory Downing, with the Blue Yota. I think you might have sold him the Straight axel he is gona be puttine in soon.

bill c · 01-12-2007, 01:48 PM

yes i know cory. im just down the street, i set up his 529s. im thinking on sunday about 12ish at beals,let me know i will go.or stop by the house. if my runner is there i should be to.

Manwhalo · 01-12-2007, 01:59 PM

I can't committ, but I am going to try to be at Beals Point on Sunday. My puppy is in the hospital (vet) and it all depends on how he is doing.

Trikster · 01-12-2007, 03:43 PM

Any chance you can post a pic? I am not sure where your problem is by the description. My setscrew has eaten up about 1mm of the spur, but the rest is fine...

Trikster · 01-12-2007, 03:43 PM

Also, I think I am using a 9 or 10 tooth pinion.

MafiaxB · 01-12-2007, 03:57 PM

Similar for me to , my 12 tooth robinson is clipping the back edge of my 93t spur ~ the spur "wobbles" tho it's tightened evenly, .. or not i'll have to check again, but it doesnt turn perfectly circular... no harm tho, it still crawls well

Quote:

Originally Posted by Trikster

Any chance you can post a pic? I am not sure where your problem is by the description. My setscrew has eaten up about 1mm of the spur, but the rest is fine...

.

Trikster · 01-12-2007, 04:11 PM

Mine wobbles too. There is a little play room where the slipper pegs fit into the slipper clutch. This is pretty normal from what I ahve seen with the Traxxas slipper clutches. My T-Maxx was horrid as was my E-Maxx. I wouldn't worry too much about it.

1tom2go · 01-12-2007, 11:34 PM

Quote:

Originally Posted by Manwhalo

I can't committ, but I am going to try to be at Beals Point on Sunday. My puppy is in the hospital (vet) and it all depends on how he is doing.

Are you talking about this Sunday, the 14th? I hope Dozer dog is ok.

nandez11 · 01-13-2007, 12:49 AM

Quote:

Originally Posted by bill c

yes i know cory. im just down the street, i set up his 529s. im thinking on sunday about 12ish at beals,let me know i will go.or stop by the house. if my runner is there i should be to.

Sweet ok. Yeah I will try to be out there noonish. I have been trying to convince cory that he needs to buil an RC crawler now. He likes driving my two all the time. Maybe I might get him to go on Sunday. Hopefully see ya there.

rockhugger · 01-13-2007, 02:19 AM

Quote:

Originally Posted by Manwhalo

I can't committ, but I am going to try to be at Beals Point on Sunday. My puppy is in the hospital (vet) and it all depends on how he is doing.

I hope the pup ( dozer the video dog ) is ok.

I'll be there Sunday, I'm just finishing up a few bits of my build to give a test run. Anybody know if Hot glueing the tires will work for a bit, just to get me through Sunday , then I'm going to cut and die the wheels so I don't need anything permanent? thanks

nandez11 · 01-13-2007, 09:32 AM

Quote:

Originally Posted by rockhugger

I hope the pup ( dozer the video dog ) is ok.

I'll be there Sunday, I'm just finishing up a few bits of my build to give a test run. Anybody know if Hot glueing the tires will work for a bit, just to get me through Sunday , then I'm going to cut and die the wheels so I don't need anything permanent? thanks

It's worth a try. If not you could just use a REALLY REALLY small dab of CA.

bill c · 01-13-2007, 11:50 AM

cool some crawlin this sunday, see ya at noonish at beals.

Natedog · 01-13-2007, 04:36 PM

Quote:

Originally Posted by bill c

cool some crawlin this sunday, see ya at noonish at beals.

I might come out too then, need to try my new mods. Do you RC wheel right at Beal's Point or? I havne't been there in years and forget where everything's at.

bill c · 01-13-2007, 05:11 PM

Quote:

Originally Posted by Natedog

I might come out too then, need to try my new mods. Do you RC wheel right at Beal's Point or? I havne't been there in years and forget where everything's at.

yes, you will see us in the parking lot to the right. i will be in a black 4runner,

Natedog · 01-13-2007, 06:47 PM

Cool, I'll probably be in a yellow Toyota or a red Ranger.

rockhugger · 01-13-2007, 08:20 PM

Quote:

Originally Posted by nandez11

It's worth a try. If not you could just use a REALLY REALLY small dab of CA.

cool thanks.... yeah , I'm just gonna wing it.

see ya'll noonish.

Trikster · 01-14-2007, 10:20 AM

You guys going to go straight to Beales point or McDonalds first? Slight chance I can come out today...

bill c · 01-14-2007, 11:10 AM

Quote:

Originally Posted by Trikster

You guys going to go straight to Beales point or McDonalds first? Slight chance I can come out today...

i will be at the lake about 12ish. see ya out there

Natedog · 01-15-2007, 01:01 AM

Nice to meet y'all, I had a good time and put my TLT to it's second real test.

View Poll Results: Which date is best?
January 20, 2007	9	56.25%
January 21, 2007	7	43.75%
Voters: 16. You may not vote on this poll

01-13-2007, 06:47 PM	#76
Natedog I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia Posts: 12,107	Cool, I'll probably be in a yellow Toyota or a red Ranger. Last edited by Natedog; 01-13-2007 at 06:53 PM.

01-12-2007, 11:42 AM	#61
1tom2go Quarry Creeper Join Date: Jul 2006 Location: Las Cruces, NM Posts: 412	I have put shims between the motor and motor mount to make the pinion hit the spur well.

01-12-2007, 12:03 PM	#62
nandez11 Pebble Pounder Join Date: Jan 2006 Location: Folsom Posts: 160	I wish I could do a snow run this weekend, I could probably get out to Beals this sunday though. I will also be out there on sunday the 21st. Can't wait to meet some of your guys. Bil C-- I was wondering if you are the guy that lives across the street from the "white house" . I don't want to say the road but I think I know where your at. I use to live across the street from ponderosa. Also Do you know Cory Downing, with the Blue Yota. I think you might have sold him the Straight axel he is gona be puttine in soon.

01-12-2007, 01:48 PM	#63
bill c Quarry Creeper Join Date: Sep 2006 Location: nor cal Posts: 265	yes i know cory. im just down the street, i set up his 529s. im thinking on sunday about 12ish at beals,let me know i will go.or stop by the house. if my runner is there i should be to.

01-12-2007, 01:59 PM	#64
Manwhalo Pebble Pounder Join Date: Apr 2006 Location: Pleasant Grove Posts: 103	I can't committ, but I am going to try to be at Beals Point on Sunday. My puppy is in the hospital (vet) and it all depends on how he is doing.

01-12-2007, 03:43 PM	#65
Trikster RCC Addict Join Date: May 2006 Location: Roseville Posts: 1,469	Any chance you can post a pic? I am not sure where your problem is by the description. My setscrew has eaten up about 1mm of the spur, but the rest is fine...

01-12-2007, 04:11 PM	#68
Trikster RCC Addict Join Date: May 2006 Location: Roseville Posts: 1,469	Mine wobbles too. There is a little play room where the slipper pegs fit into the slipper clutch. This is pretty normal from what I ahve seen with the Traxxas slipper clutches. My T-Maxx was horrid as was my E-Maxx. I wouldn't worry too much about it.

01-13-2007, 11:50 AM	#73
bill c Quarry Creeper Join Date: Sep 2006 Location: nor cal Posts: 265	cool some crawlin this sunday, see ya at noonish at beals.

01-14-2007, 10:20 AM	#78
Trikster RCC Addict Join Date: May 2006 Location: Roseville Posts: 1,469	You guys going to go straight to Beales point or McDonalds first? Slight chance I can come out today...

01-15-2007, 01:01 AM	#80
Natedog I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia Posts: 12,107	Nice to meet y'all, I had a good time and put my TLT to it's second real test.

Sponsored Links

RCCrawler Forums

Thread: Sac, CA Get Together, JAN 2007