RCCrawler Forums

neuera 916 · 10-12-2007, 10:47 PM

never mind i found it

get r done · 10-12-2007, 10:58 PM

do the Smokey and the Bandit..With that big *** bird on the hood..lol

rc crawler builder · 10-12-2007, 11:20 PM

that thing looks bad ***. Mine was White and now its black

rockhugger · 10-12-2007, 11:24 PM

how many of you guys coming out on Sunday have Wheely kings? I know Nate does and Bill does.

or anyone in Sac. that has one viewing this thread?
say I

I

get r done · 10-12-2007, 11:47 PM

I will be there again with neuera

Natedog · 10-13-2007, 12:45 AM

Dang didn't even see this thread till now somehow....

Quote:

Originally Posted by neuera 916

natedog you going to nake it this time

Not sure...we'll see. How's your dig setup workin?

Quote:

Originally Posted by rockhugger

how many of you guys coming out on Sunday have Wheely kings? I know Nate does and Bill does.

or anyone in Sac. that has one viewing this thread?
say I

I

Yeah but not making enough headway on it's completion....keep running into problems makin stuff work out....

neuera 916 · 10-13-2007, 09:03 AM

hes alive!!
rear dig is working perfect.

Natedog · 10-13-2007, 03:50 PM

Yeah, still tryin to settle on a tranny for the J2-TT with my Wheely King axles. So far everything either makes the driveline angle not so good or high cog...got my WK tranny w/clocked motor plate and locked out slipper (6mm output shafts) and my Stampede tranny (5mm outputs) all locked up. Something narrower that will bolt up T-Maxx drivelines is what I"m after...don't really want to buy an R2V2 (5mm outputs) http://rc4wdstore.com/product_info.p...roducts_id=515 but I might.

Glad that yer dig is worked out.

Going outside to work on my 1:1 in a few, great weather.

rockhugger · 10-13-2007, 04:37 PM

Quote:

Originally Posted by Natedog

Yeah, still tryin to settle on a tranny for the J2-TT with my Wheely King axles. So far everything either makes the driveline angle not so good or high cog...got my WK tranny w/clocked motor plate and locked out slipper (6mm output shafts) and my Stampede tranny (5mm outputs) all locked up. Something narrower that will bolt up T-Maxx drivelines is what I"m after...don't really want to buy an R2V2 (5mm outputs) http://rc4wdstore.com/product_info.p...roducts_id=515 but I might.

Glad that yer dig is worked out.

Going outside to work on my 1:1 in a few, great weather.

Dude, your overanalysing the whole 5 mm - 6 mm output shaft thing... 5 mm becomes 6 mm reall fast with the right drill bit.

just slap a tranny in there and adjust your ride height accordingly for the drive line angle. Lower is more stable ...

:-P.

I'm determined to make this WK tranny work. Ond dude had this sweet clocking plate that he machined... he came up to Loon and met us a month ago. Fprgot his name. It was a yellow tuber. super sweet.

Norcal crawler · 10-13-2007, 04:55 PM

Quote:

Originally Posted by rockhugger

I'm determined to make this WK tranny work. Ond dude had this sweet clocking plate that he machined... he came up to Loon and met us a month ago. Fprgot his name. It was a yellow tuber. super sweet.

The guys name on here was sickfab. i cant remember his real name though. Oh and it starts at 9 right?

Natedog · 10-13-2007, 08:47 PM

Yeah 9ish is when it starts.

Yeah I'm good at that.

Easy to drill out the plastic driveshaft or use the larger/smaller Maxx ends as needed for the tranny. Want my motor down next to the skidplate, not above the clocked WK tranny.

get r done · 10-13-2007, 09:03 PM

Should be good weather in the morning. Hope there is a good turn out. Neuera told me there were a few new faces last time. Hope to meet them this crawl. See you around 9ish

Natedog · 10-13-2007, 11:45 PM

Aight...I'm in!

Brandon · 10-14-2007, 12:40 AM

Probably wont be there until 10-10:30, but me and Dustin (51504rock) are going to be there

neuera 916, found a few axle shafts for you too

neuera 916 · 10-14-2007, 12:44 AM

good see you tommorrow

Norcal crawler · 10-14-2007, 05:49 PM

That was a lot of fun. Damn, the 6x6 is freakin inpossible to drive.

neura you sure didnt take it easy driving my bruiser.

thats how it is supposed to be driven though and now i need some bumpers and rock sliders. And would i be able to get all the brazing stuff at Home Deopt or Lowes or some place like that?

Oh and i guess i rolled the bruiser a few times. these were the screws that hold the rear body mounts on. And anyone get some pics of my bruiser? i saw a few people with cameras.

neuera 916 · 10-14-2007, 09:11 PM

had a good day! ok i lied i broke everything today.

get r done · 10-14-2007, 09:55 PM

Must have been those rims

rc crawler builder · 10-14-2007, 10:10 PM

Nice pics. Had a good day next time we might need to venture over to the boat launch area and check it out. There is alot of rocks over there

rockhugger · 10-15-2007, 01:02 AM

I drove around after everyone left, and there are rocks everywhere, but the spot we were at today was really good. I'm liking it way better than beals especially since you can park so close.
Good day today and a great turn out.

10-12-2007, 10:47 PM	#121
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	? never mind i found it

10-12-2007, 11:20 PM	#123
rc crawler builder Pebble Pounder Join Date: Sep 2005 Location: Citrus Heights, CA Posts: 108	george that thing looks bad ***. Mine was White and now its black

10-13-2007, 09:03 AM	#127
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	? hes alive!! rear dig is working perfect.

10-13-2007, 08:47 PM	#131
Natedog I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia Posts: 12,107	Yeah 9ish is when it starts. Yeah I'm good at that. Easy to drill out the plastic driveshaft or use the larger/smaller Maxx ends as needed for the tranny. Want my motor down next to the skidplate, not above the clocked WK tranny. Last edited by Natedog; 10-13-2007 at 09:19 PM.

10-14-2007, 12:44 AM	#135
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	nice good see you tommorrow

10-12-2007, 10:58 PM	#122
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	do the Smokey and the Bandit..With that big *** bird on the hood..lol

10-12-2007, 11:24 PM	#124
rockhugger RCC Addict Join Date: Oct 2006 Location: crawlifornia Posts: 1,612	how many of you guys coming out on Sunday have Wheely kings? I know Nate does and Bill does. or anyone in Sac. that has one viewing this thread? say I I

10-12-2007, 11:47 PM	#125
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	I will be there again with neuera

10-13-2007, 03:50 PM	#128
Natedog I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia Posts: 12,107	Yeah, still tryin to settle on a tranny for the J2-TT with my Wheely King axles. So far everything either makes the driveline angle not so good or high cog...got my WK tranny w/clocked motor plate and locked out slipper (6mm output shafts) and my Stampede tranny (5mm outputs) all locked up. Something narrower that will bolt up T-Maxx drivelines is what I"m after...don't really want to buy an R2V2 (5mm outputs) http://rc4wdstore.com/product_info.p...roducts_id=515 but I might. Glad that yer dig is worked out. Going outside to work on my 1:1 in a few, great weather.

10-13-2007, 09:03 PM	#132
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	Should be good weather in the morning. Hope there is a good turn out. Neuera told me there were a few new faces last time. Hope to meet them this crawl. See you around 9ish

10-13-2007, 11:45 PM	#133
Natedog I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia Posts: 12,107	Aight...I'm in!

10-14-2007, 12:40 AM	#134
Brandon Im Brandon Join Date: Feb 2005 Location: Colfax, CA Posts: 8,156	Probably wont be there until 10-10:30, but me and Dustin (51504rock) are going to be there neuera 916, found a few axle shafts for you too

10-14-2007, 05:49 PM	#136
Norcal crawler RCC Addict Join Date: May 2006 Location: California Posts: 1,361	That was a lot of fun. Damn, the 6x6 is freakin inpossible to drive. neura you sure didnt take it easy driving my bruiser. thats how it is supposed to be driven though and now i need some bumpers and rock sliders. And would i be able to get all the brazing stuff at Home Deopt or Lowes or some place like that? Oh and i guess i rolled the bruiser a few times. these were the screws that hold the rear body mounts on. And anyone get some pics of my bruiser? i saw a few people with cameras. Last edited by Norcal crawler; 10-14-2007 at 06:52 PM.

10-14-2007, 09:11 PM	#137
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	folsom crawl had a good day! ok i lied i broke everything today. Attached Images

10-14-2007, 09:55 PM	#138
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	Must have been those rims

Sponsored Links

10-14-2007, 10:10 PM	#139
rc crawler builder Pebble Pounder Join Date: Sep 2005 Location: Citrus Heights, CA Posts: 108	Nice pics. Had a good day next time we might need to venture over to the boat launch area and check it out. There is alot of rocks over there

10-15-2007, 01:02 AM	#140
rockhugger RCC Addict Join Date: Oct 2006 Location: crawlifornia Posts: 1,612	I drove around after everyone left, and there are rocks everywhere, but the spot we were at today was really good. I'm liking it way better than beals especially since you can park so close. Good day today and a great turn out.

RCCrawler Forums

Thread: sac crawlers gtg