Re: IFS kit for Wraith Quote:
|
Re: IFS kit for Wraith Quote:
Yes, and how did you mod the front diif to accept MIPS? |
Re: IFS kit for Wraith :shock: Do it!!!!! lol |
Re: IFS kit for Wraith MIP front drive shaft #'s 1 - MIP 10145 - SCX spline center CVD kit. 2x - MIP 10133 - slash 4x4 keyed front stub axle this stub axle does not have a pass thru pin, instead it has two flat sides for the matching hub to lock to. i have had both types of front stub axles now. with the pass thru pin & now the keyed stub axle ! the keyed front stub axle is a lot more durable "thumbsup" this set up will run you around $70.00 or so theres normally a bunch of used MIP ax/10 & SCX drive shafts in the for sale sechion, used will work all-so - just change to the stub axle on one end ! locker i took a old alum locker i had & drilled it out so you can run a 1/4 shaft thru it. then drilled a 3 mm hole down into the locker & taped it for a set screw. have a flat spot on the shaft for the set screw. then i machined down the shaft ends for 6mm outputs & drilled out the ring gear to 6mm - not an easy task to do - the HD ring gear metal is super super hard. & then - bingo a EXO locker. most of U will have to turn down the output shafts down to 5mm (standard MIP drive hub size). the ring gear hole is big enough for a 5mm shaft to pass thru & you won't have to drill out the ring gear. |
Re: IFS kit for Wraith Do those stub axles require any shimming? And Im assuming you had to open up the back of the knuckle to fit the bell of the drive shaft, correct? |
Re: IFS kit for Wraith Quote:
MIP slash 4x4 front stubs are the same length/size as the exo stub - just normal shiming is needed. the only slight downfall when using MIP's is - there BIG. mild Hub & C hub clearancing is required !! as you can see here - things are real tight ! but with just a little tuning - it spins free with no binding "thumbsup" |
Re: IFS kit for Wraith Awesome Job!!! "thumbsup""thumbsup" and you priced it so more people can afford it. "thumbsup" |
Re: IFS kit for Wraith great work!!! with JIA's build thread gone, this will help those like me new to the rc scene. trying to convince my missus to let me do a hybrid. :-) |
Re: IFS kit for Wraith Everything the DMG said is spot on. I have been beating mine hard for months with big power and no failures. http://i1331.photobucket.com/albums/...ps4430c8ef.jpg |
Re: IFS kit for Wraith Got my shipping confirmation this morning, can't wait to see it when I get back from Nationals! :mrgreen: |
Re: IFS kit for Wraith That's a really good price! Bravo sir. |
Re: IFS kit for Wraith Quote:
|
Re: IFS kit for Wraith Ordered along with a bunch of stuff. This was totally a 'don't think, buy' moment, I don't even have a Wraith to put it in. |
Re: IFS kit for Wraith Ordered one too, couldn't resist"thumbsup" |
Re: IFS kit for Wraith Will be ordering soon ... Would of just but the shipping is $60 .... Damn .. Now I've looked the hammers will also be getting some stuff haha . Really excited for this Jack. |
Re: IFS kit for Wraith Heres the trick to the Locker, Grip Fab Clamp style locker. http://i1196.photobucket.com/albums/...720_225514.jpg |
Re: IFS kit for Wraith Quote:
for the stock dog bones. would B fairly simple to convert to a 5mm shaft to be able use MIP cvd's all-so "thumbsup" just orered mine up today - going to slip this under the DmG's stiffy kit for G6 IFS rig !! :twisted: make sure guys - to order U up a steering bell crank for this kit "thumbsup" this kit dose not us the stock EXO steering set-up !! thx U BMrc - the DmG |
Re: IFS kit for Wraith Quote:
this is what i plan to do if time permits. i love the look of the DmG kit compared to stock - no comparison really. to all those who have purchased the IFS kit, please be patient as initial sales are a bit heavier than anticipated. we never get more than a week behind but i'm pretty close to that right now. i'll be shipping a bunch (hopefully all) tomorrow and wednesday. most of you i contacted directly are not in a rush and i appreciate that. i'm also working on a screw map for instruction. |
Re: IFS kit for Wraith Quote:
for your Blue monkey rig "thumbsup" thx the DmG |
Re: IFS kit for Wraith Just done my order .... Hopefully the Pioneering one in the UK :D Can't wait ... Now Should I buy a Donor Exo or parts lol .... The exo I've found is £140 for a roller Jack. |
All times are GMT -6. The time now is 06:13 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com