RCCrawler Forums

SlinkySam · 02-02-2007, 09:08 AM

Quote:

Originally Posted by metomwhou

Hey Sam,
Have you thought about making something just for the rear axle? Most people are running lockouts anyway so if you could come up with some similar to your C's that essentially makes the axle just a straight axle then you'd probably have a hot new product on your hands. Just thought I'd throw it out there cause thats actually what I'm looking for. ;)
Tom

You know, I actually have a couple ideas drawn up, but the cost to get into the intial batch is somewhat expensive and I didn't see a high volume of people wanting/needing these since they can lock them out for free. I have had 2 people I think ask about them (those and rotated Cs). I will blow the dust off of them and see what it might take.

-Sam

metomwhou · 02-02-2007, 01:44 PM

Awesome, put me down for two sets of rears and C's when you get them ready!
Tom

Rat1 · 02-02-2007, 10:45 PM

Let me know when you get the rear locked out Cs. I need a set of rears and a set of regular fronts.

Yes locking out the TLT steering is easy but not very scale looking if you looking to do a semi scale build. That and the extra links just add a weak area that can possibly fail.

smokinubyrc · 02-02-2007, 11:04 PM

what is waht i would like to see as a rear lock out idea crappy paint drawn pic but you might get the idea ode buy some !

SlinkySam · 02-05-2007, 08:12 PM

INVENTORY UPDATE!!

I am currently out of Fat-Rock C-s :-(. However, a new batch has been ordered but it will be approximately 3 weeks for delivery. Thanks to supporting Vendors such as Tammies Hobbies and theCrawlerStore, they have pretty much bought me out of stock and should have some on the shelf. Move fast though, they are a hot commodity for sure.

Thanks again for everyone's support

,
-Sam

Tammies Hobbies- 1-800-521-5614, thobbiesor@msn.com
theCrawlerStore - www.theCrawlerStore.com

Fryedchicken · 02-12-2007, 03:38 PM

Is it possible to pre order a set of 4 axle-Cs?

Fryedchicken · 02-13-2007, 10:20 AM

Never mind the Crawler store had them. Thanks anyways.

ILoveRCRockCrawlin · 02-17-2007, 09:56 AM

Got mine today! They're very nice, and fast shipping, too!! THANKS!

Rat1 · 02-17-2007, 10:14 AM

I have checked every vendor I could find and they are all out of stock on the Axle Cs. Any word on when they will be available again.

Fryedchicken · 02-17-2007, 03:26 PM

I got mine yesterday form the crawlerstore. I can't wait to get my knuckles and bearings from run2jeepn and bolt it all up!

tmaxxking1 · 02-17-2007, 10:13 PM

Im At The Roller Stage

Thanks Again For Killer Service And A Great Product

SlinkySam · 02-18-2007, 07:08 PM

Thanks everyone for waiting. I am looking at Tuesday or Wednesday for when they come in.

I will of course do a day of random sampling of Quality Assurance checks to make sure they are correct, so that means I will have them available on the website by Wednesday and will ship on Thursday/Friday.

REALLY Important, if you want C-s right away, please order by Thursday 5 PM Pacific Time. I will be shipping out the orders on Friday at lunch time. Then I will be off on my honeymoon for a couple of weeks.

Thanks again and glad everyone is happy so far with the product and customer service. I try to make all the orders as smooth as possible and everyone happy in the end. So thanks again.

-Sam

twisted84toyota · 02-18-2007, 07:36 PM

I have them on the Poormans High Lift,Painted them FLAT BALCK and they look KILLER!!! They are hard to see here but they are on both front and rear KILLER PRODUCT............gotta order 2 more sets for my 2.2 truck!!

SlinkySam · 02-18-2007, 08:12 PM

HAHHA.... poor man's highlift. That's a good one. Although, I think you spent your money wisely on the fake version Vs. the real version. $300+ (or whatever it is now) is quite a bit for one of those rigs. It looks great BTW.

-Sam

twisted84toyota · 02-18-2007, 08:22 PM

Quote:

Originally Posted by SlinkySam

HAHHA.... poor man's highlift. That's a good one. Although, I think you spent your money wisely on the fake version Vs. the real version. $300+ (or whatever it is now) is quite a bit for one of those rigs. It looks great BTW.

-Sam

mine is all steel chassied and uses tlt-1 axles and a pede tranny, it was just parts I had on the work bench!

Here is the build thread......

POORMANS HIGH LIFT ***DONE***and COOKED!!

......you need a "product users" section on youor site for pics of rigs with your parts on them........
I love them my truck weighs in the 9# range and I had snapped the axle "ear" off on a nasty tumble.......NEVER AGAIN thatnks to you!!!

here is a vid of the axle break its about 1/2 way through.........
http://video.google.com/videoplay?do...74035455&hl=en

SlinkySam · 02-18-2007, 08:38 PM

Quote:

Originally Posted by twisted84toyota

I love them my truck weighs in the 9# range and I had snapped the axle "ear" off on a nasty tumble.......NEVER AGAIN thatnks to you!!!

Funniest thing ever. Obviously I have unlimited access to the Axle-Cs. I pulled out my vintage 2005 comp rig to do a "Retro-Comp" weekend and it had the plastic C-s still. I didn't feel like I needed to install them before the event. Wouldn't you know it, I snapped 2 today

. Just a tad embarrassing to not only still be running them, but then snap the plastic C-s as well.

-Sam

fperez0209 · 02-19-2007, 11:47 PM

if i paypal you wednesday you will ship by friday

SlinkySam · 02-20-2007, 01:17 AM

Quote:

Originally Posted by fperez0209

if i paypal you wednesday you will ship by friday

Once I have received the parts in and verified they are good, I will populate the store accordingly and you will be able to order on the website and pay through PayPal. As long as your payment clears through PayPal, I will ship by Friday. Thursday possibly if things go right.

-Sam

SlinkySam · 02-21-2007, 05:35 PM

Sorry to say, the parts did not come in today. However, there is hope for tomorrow as it went out to the platers today. I will go ahead and populate the cart tonight or tomorrow morning so that they can be purchased. I have good confidence that the quality will match those of the past.

Thanks for the patience.
-Sam

929freak · 02-21-2007, 07:44 PM

I keep goin to fat-rock to place my axle c order but it won't let me.....I don't wan't to be left out...what do I do?????????????????????

02-17-2007, 10:13 PM	#171
tmaxxking1 Rock Crawler Join Date: Jan 2007 Location: Long Island NY Posts: 505	. Im At The Roller Stage Thanks Again For Killer Service And A Great Product

02-19-2007, 11:47 PM	#177
fperez0209 Pebble Pounder Join Date: Nov 2006 Location: bronx Posts: 109	availability if i paypal you wednesday you will ship by friday

02-02-2007, 01:44 PM	#162
metomwhou Rock Crawler Join Date: Jan 2006 Location: Colorado Springs Posts: 606	Awesome, put me down for two sets of rears and C's when you get them ready! Tom

02-02-2007, 10:45 PM	#163
Rat1 Quarry Creeper Join Date: Nov 2006 Location: Rats nest Grafton ND Posts: 381	Let me know when you get the rear locked out Cs. I need a set of rears and a set of regular fronts. Yes locking out the TLT steering is easy but not very scale looking if you looking to do a semi scale build. That and the extra links just add a weak area that can possibly fail.

02-02-2007, 11:04 PM	#164
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	what is waht i would like to see as a rear lock out idea crappy paint drawn pic but you might get the idea ode buy some !

02-05-2007, 08:12 PM	#165
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	INVENTORY UPDATE!! I am currently out of Fat-Rock C-s :-(. However, a new batch has been ordered but it will be approximately 3 weeks for delivery. Thanks to supporting Vendors such as Tammies Hobbies and theCrawlerStore, they have pretty much bought me out of stock and should have some on the shelf. Move fast though, they are a hot commodity for sure. Thanks again for everyone's support , -Sam Tammies Hobbies- 1-800-521-5614, thobbiesor@msn.com theCrawlerStore - www.theCrawlerStore.com

02-12-2007, 03:38 PM	#166
Fryedchicken Newbie Join Date: Nov 2006 Location: Y.C. Posts: 17	Is it possible to pre order a set of 4 axle-Cs?

02-13-2007, 10:20 AM	#167
Fryedchicken Newbie Join Date: Nov 2006 Location: Y.C. Posts: 17	Never mind the Crawler store had them. Thanks anyways.

02-17-2007, 09:56 AM	#168
ILoveRCRockCrawlin RCC Addict Join Date: Dec 2004 Location: Central NY Posts: 1,980	Got mine today! They're very nice, and fast shipping, too!! THANKS!

02-17-2007, 10:14 AM	#169
Rat1 Quarry Creeper Join Date: Nov 2006 Location: Rats nest Grafton ND Posts: 381	I have checked every vendor I could find and they are all out of stock on the Axle Cs. Any word on when they will be available again.

02-17-2007, 03:26 PM	#170
Fryedchicken Newbie Join Date: Nov 2006 Location: Y.C. Posts: 17	I got mine yesterday form the crawlerstore. I can't wait to get my knuckles and bearings from run2jeepn and bolt it all up!

02-18-2007, 07:08 PM	#172
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	Thanks everyone for waiting. I am looking at Tuesday or Wednesday for when they come in. I will of course do a day of random sampling of Quality Assurance checks to make sure they are correct, so that means I will have them available on the website by Wednesday and will ship on Thursday/Friday. REALLY Important, if you want C-s right away, please order by Thursday 5 PM Pacific Time. I will be shipping out the orders on Friday at lunch time. Then I will be off on my honeymoon for a couple of weeks. Thanks again and glad everyone is happy so far with the product and customer service. I try to make all the orders as smooth as possible and everyone happy in the end. So thanks again. -Sam

Sponsored Links

02-18-2007, 07:36 PM	#173
twisted84toyota Quarry Creeper Join Date: Nov 2004 Location: Frayed ends of sanity Posts: 400	I have them on the Poormans High Lift,Painted them FLAT BALCK and they look KILLER!!! They are hard to see here but they are on both front and rear KILLER PRODUCT............gotta order 2 more sets for my 2.2 truck!!

02-18-2007, 08:12 PM	#174
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	HAHHA.... poor man's highlift. That's a good one. Although, I think you spent your money wisely on the fake version Vs. the real version. $300+ (or whatever it is now) is quite a bit for one of those rigs. It looks great BTW. -Sam

02-21-2007, 05:35 PM	#179
SlinkySam RCC Addict Join Date: Apr 2004 Location: Santa Clara Posts: 1,456	Sorry to say, the parts did not come in today. However, there is hope for tomorrow as it went out to the platers today. I will go ahead and populate the cart tonight or tomorrow morning so that they can be purchased. I have good confidence that the quality will match those of the past. Thanks for the patience. -Sam

02-21-2007, 07:44 PM	#180
929freak Rock Stacker Join Date: Jan 2007 Location: D-town Posts: 86	I keep goin to fat-rock to place my axle c order but it won't let me.....I don't wan't to be left out...what do I do?????????????????????

RCCrawler Forums

Thread: » Fat-Rock « Axle-Cs