RCCrawler Forums

Harvo · 12-18-2013, 06:19 PM

Quote:

Originally Posted by Grandmasboy

What did the fish say when he ran into the concrete wall?

Quote:

Originally Posted by cliff1119

I'm going with (dam)

Harvo · 12-18-2013, 06:22 PM

Quote:

Originally Posted by dentonmac

Thanks GMB! I'll rattle JimJams cage also.

Torched, Sin, and I scoped a little for a scaler run. Seems to be some pretty good places. Edit: I will post specific directions for the entrance change. It's not hugely different, but different enough.

Thanks guys, as always, looking dam forward to it.

FYI, the property management folks at Northshore have done quite a bit of cleanup of brush and trees. Almost unrecognizable...almost!

Let me know if there is any recon that you need me to do for either of those areas.
.

Thanks for the direction info... the scaler recon... and the Northshore info

I'm getting a little excited about it now.

Then I remember the wind

Too bad it doesn't blow the other way. Then we would have a ginormous wind block.

Harvo · 12-18-2013, 06:27 PM

If you guys are OK with it... I want to run 2 scale courses that day. Here is the scoop...

Course 2 will be a lot like our S comp courses but for scalers. Qty 10 - 16" tennis ball Gates, 80% rock, 20 point bypass, 8 minute time limit.

There is a reason. I will explain more there.

cliff1119 · 12-18-2013, 08:13 PM

Put me in for this sir both classes please!!!

ax10tn · 12-18-2013, 09:10 PM

I gotta get busy on my wraith so I can run the scale courses ... The stock motor went up in smoke . So it's electronic changing time if can find the time to do it with the holiday going strong and being a fed-ex delivery man I have little to no time to spare

obebaldone1 · 12-23-2013, 04:11 PM

Hope every one has a Merry Christmas and enjoys the time off.( If you get time off).

cliff1119 · 12-24-2013, 04:28 PM

Merry Christmas to all don't forget the reason we celebrate and hope everyone gets all the Rc stuff they asked for!!!!

ax10tn · 12-24-2013, 04:36 PM

Merry Christmas and a happy happy happy new year to all my etrc buds . See y'all soon !

ax10tn · 12-25-2013, 07:19 AM

Quote:

Originally Posted by cliff1119

Merry Christmas to all don't forget the reason we celebrate and hope everyone gets all the Rc stuff they asked for!!!!

well i got some rc goodies this morning......

integy 29 piece tool set
30x24 work mat
soldering jig
ytc wheels

hbj069 · 12-25-2013, 07:53 AM

nice! i heard the red sled broke down at your house

Pdog7 · 12-26-2013, 08:37 AM

Lets see some pics of that soldering jig..

ax10tn · 12-26-2013, 11:43 AM

Quote:

Originally Posted by Pdog7

Lets see some pics of that soldering jig..

I'll post it when I get home . And I'll send you one by text

Harvo · 12-26-2013, 02:44 PM

Got some wind proof pants for Christmas. Just in time for the comp

Oh... and a lipo powered hand warmer... pretty cool.

obebaldone1 · 12-26-2013, 04:23 PM

Oh... and a lipo powered hand warmer... pretty cool.[/QUOTE]

Does it need a BEC

Grandmasboy · 12-27-2013, 10:13 AM

Quote:

Originally Posted by obebaldone1

Does it need a BEC

Search, you noob.

Yes, you need an external BEC!

strato54 · 12-27-2013, 09:03 PM

If you guys will let me come play and I can get off work, I will try to make this one. Love crawling with you guys. We'll see.

fordsuperduty · 12-28-2013, 06:46 AM

If I can get the boss to let me off work I'll be there for sure. If not I'll try to make the next one.

Sent from my iPhone in the shop

Harvo · 12-28-2013, 07:00 AM

Everyone Added so far

Grandmasboy · 12-28-2013, 08:07 AM

Quote:

Originally Posted by cliff1119

Merry Christmas to all don't forget the reason we celebrate and hope everyone gets all the Rc stuff they asked for!!!!

Did anyone get any extra driving skill for Christmas? It seems Santa forgot to bring mine.

ClassiCutCustoms · 12-28-2013, 09:07 AM

I didn't...... just had a lump of coal and a note that said "you want it..... you make it" ....... lol

12-18-2013, 06:27 PM	#23
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	Re: ETRC Comp #2 January If you guys are OK with it... I want to run 2 scale courses that day. Here is the scoop... Course 2 will be a lot like our S comp courses but for scalers. Qty 10 - 16" tennis ball Gates, 80% rock, 20 point bypass, 8 minute time limit. There is a reason. I will explain more there.

12-18-2013, 08:13 PM	#24
cliff1119 Quarry Creeper Join Date: Jan 2012 Location: on the other side of the tracks from baldy Posts: 380	Re: ETRC Comp #2 January Put me in for this sir both classes please!!!

12-18-2013, 09:10 PM	#25
ax10tn RCC Addict Join Date: Nov 2009 Location: cleveland,Tn Posts: 1,331	Re: ETRC Comp #2 January I gotta get busy on my wraith so I can run the scale courses ... The stock motor went up in smoke . So it's electronic changing time if can find the time to do it with the holiday going strong and being a fed-ex delivery man I have little to no time to spare

12-23-2013, 04:11 PM	#26
obebaldone1 Rock Crawler Join Date: Mar 2010 Location: Happy Top Posts: 777	Re: ETRC Comp #2 January Hope every one has a Merry Christmas and enjoys the time off.( If you get time off).

12-24-2013, 04:28 PM	#27
cliff1119 Quarry Creeper Join Date: Jan 2012 Location: on the other side of the tracks from baldy Posts: 380	Re: ETRC Comp #2 January Merry Christmas to all don't forget the reason we celebrate and hope everyone gets all the Rc stuff they asked for!!!!

12-24-2013, 04:36 PM	#28
ax10tn RCC Addict Join Date: Nov 2009 Location: cleveland,Tn Posts: 1,331	Re: ETRC Comp #2 January Merry Christmas and a happy happy happy new year to all my etrc buds . See y'all soon !

12-25-2013, 07:53 AM	#30
hbj069 RCC Addict Join Date: Oct 2008 Location: south caki laki again Posts: 1,695	Re: ETRC Comp #2 January nice! i heard the red sled broke down at your house

12-26-2013, 08:37 AM	#31
Pdog7 TN State Champ 11,12,13 Join Date: Oct 2008 Location: KTM Talk.com Posts: 1,796	Re: ETRC Comp #2 January Lets see some pics of that soldering jig..

12-26-2013, 02:44 PM	#33
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	Re: ETRC Comp #2 January Got some wind proof pants for Christmas. Just in time for the comp Oh... and a lipo powered hand warmer... pretty cool.

12-26-2013, 04:23 PM	#34
obebaldone1 Rock Crawler Join Date: Mar 2010 Location: Happy Top Posts: 777	Re: ETRC Comp #2 January Oh... and a lipo powered hand warmer... pretty cool.[/QUOTE] Does it need a BEC

12-27-2013, 09:03 PM	#36
strato54 Quarry Creeper Join Date: Feb 2011 Location: Wellford, SC Posts: 495	Re: ETRC Comp #2 January If you guys will let me come play and I can get off work, I will try to make this one. Love crawling with you guys. We'll see.

12-28-2013, 06:46 AM	#37
fordsuperduty Rock Crawler Join Date: May 2010 Location: Bedford Ky Posts: 721	If I can get the boss to let me off work I'll be there for sure. If not I'll try to make the next one. Sent from my iPhone in the shop Last edited by fordsuperduty; 12-29-2013 at 12:12 PM.

12-28-2013, 07:00 AM	#38
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	Re: ETRC Comp #2 January Everyone Added so far

12-28-2013, 09:07 AM	#40
ClassiCutCustoms RCC Addict Join Date: Aug 2013 Location: South East Posts: 1,197	I didn't...... just had a lump of coal and a note that said "you want it..... you make it" ....... lol

ETRC Comp #2 January - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GJ January comp	gdhknives	Colorado	5	01-03-2013 05:47 AM
ETRC Comp 2 (2012 / 2013) Comp 2	Harvo	Competitions	111	12-09-2012 10:23 PM
ETRC January Comp#2 of the 2011 Season	Harvo	Competitions	82	01-18-2011 06:29 PM
ETRC Comp at Brian's Hobbyland January 16th	THE PARTS GUY	Tennessee	2	01-20-2010 12:12 PM
ETRC January 1st GTG	phishead1101	Tennessee	27	12-07-2006 01:32 PM

Sponsored Links

RCCrawler Forums

Thread: ETRC Comp #2 January