11-14-2008, 11:16 PM | #1 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
| the greencoast crawler
I got my CC about a month ago and its been a slow progress with very limited funds. im still hopping to add some more goodies to this but its very reliabe i havent broken a thing on it and i drive it as hard as i can. specs: stock motors(one day to be hh) LRP AI esc(have a mamba max sent in to castle cuz it was fried) m3 hammers HPI spike rims narrower axial high ground clearence links and integy top links locked rear hitec 645 mg(one day a JR) 2 1/2 ounces in/on each diff housing still plastic gears(will get the metal ones when in stock at my LHS) XTM xcellerator shox in the rear limited 1inch in and 1/2inch out T4 shox front no limiters and stock coils flipped steering knuckles side to side to get 1/8inch more groundclearence 8 3700 mah sub-c cell battery pack and one 4200 mah slammed losi mf2 custome rock clawler body(1 hour with the heat gun) had to do a little jumbleing for these links to work and have the front paralel wth the ground front rear lock out also on both front and rear the screw on the suspension linkage mount b is inverted so the screw head is in the recessed hole reducing hang ups lots of skid plates everybody loves skid plates. i found that the wheel well cut outs made excelent scale like(as in reptile) skid plates at full flex just shy of 90 deg green coast rock crawler friendly keep the plants inside away from the rocks side view flex shot with the body this body will be crisened tommorrow at allred with some of the occrawlers |
Sponsored Links | |
11-15-2008, 02:03 PM | #2 |
Newbie Join Date: Oct 2008 Location: chisago city
Posts: 42
|
very nice!
|
11-15-2008, 04:45 PM | #3 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
srcatched it up today at allred park hears a few action shots i think i need to dail down some of the articulation |
11-15-2008, 09:56 PM | #4 |
Quarry Creeper Join Date: Jan 2008 Location: Portland OR / SLC
Posts: 462
| |
11-15-2008, 10:43 PM | #5 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
not yet still need some upgraded motors and esc the stock motors arnt bad but. they fade hard and fast i bought some e-flight heat sinks cured that problem and they were way cheep i think i spent under 8 bucks
|
11-16-2008, 09:53 AM | #6 |
Pebble Pounder Join Date: Apr 2008 Location: Las Cruces
Posts: 161
|
Great looking rig!! So did you get the Mamba working or is that the stock electronics? Before I had the mamba in my CC I did the single battery mod and used my lipo, that will certainly liven up the motors. Andrew |
11-16-2008, 08:30 PM | #7 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
not stock LRP AI. the mamba is of to Castle creations along with the money to fix it
|
11-16-2008, 08:35 PM | #8 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
wats the single battery mod
|
11-16-2008, 09:59 PM | #9 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
| |
11-16-2008, 10:12 PM | #10 |
Pebble Pounder Join Date: Apr 2008 Location: Las Cruces
Posts: 161
|
Great looking rig, so what is the wheel base? On the stock ESC, the "b2" positive and negative power the BEC, so use those and you can have just one pack to run. You need to short the B1 wires to get power to the motor. BTW do you have any more of those East Coast Hydro stickers? Andrew |
11-16-2008, 10:23 PM | #11 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
12in axel to axel stock width. they are Green Coast Hydro and Green Coast MotherF*****. not east coast. i have tons of both
|
11-16-2008, 10:32 PM | #12 | |
Pebble Pounder Join Date: Apr 2008 Location: Las Cruces
Posts: 161
| Quote:
My bad on the mistake, If you have a few of each to spear, I can PM you my Address. I built my shock hoops today I will take pics and add to my thread. i should of looked at your location, I am from San Jose. Andrew | |
11-16-2008, 10:50 PM | #13 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
in nor-cal
|
11-16-2008, 10:57 PM | #14 |
Pebble Pounder Join Date: Apr 2008 Location: Las Cruces
Posts: 161
| |
11-16-2008, 11:03 PM | #15 |
Quarry Creeper Join Date: Oct 2008 Location: fullerton
Posts: 273
|
thats cool. well not right now its hot and ashy
|
11-20-2008, 08:02 PM | #16 |
Rock Stacker Join Date: Jul 2008 Location: dundalk
Posts: 62
|
looks good
|
| |