Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Thunder Power 1350 Pro Power 30c review

Reply
 
LinkBack Thread Tools Display Modes
Old 05-18-2009, 05:05 PM   #21
Quarry Creeper
 
Join Date: Feb 2009
Location: Richmond, VA
Posts: 379
Default

Weird idea. could i use an aftermarket servo/battery mount to mount one of these batteries to my crawler's rear axle. if i dont put a servo on the rear plate??? just trying to figure out how i could use one of these batteries for my crawler

would this battery fit the front axle?

http://www.hobbycity.com/hobbycity/s...0C_Lipoly_Pack

and how much better is the first battery in this post???

is this bad manners to post the above battery in this thread??? i am not sure what is good manners concerning such issues
BMFOTP is offline   Reply With Quote
Sponsored Links
Old 05-18-2009, 05:14 PM   #22
I wanna be Dave
 
Join Date: Sep 2008
Location: behind the wheel of a monster truck...
Posts: 2,878
Default

Quote:
Originally Posted by Just Zach View Post
Last I heard was soon. Hopefully very soon.

Soon is now...Just ordered me one off Horizon..Also nabed me up one of the new Thunder Power 610c chargers....Hey Zach,do you know if the thunder power power supply will work with that charger..I can't get thunder power to answer me...
Jeepial is offline   Reply With Quote
Old 05-18-2009, 08:55 PM   #23
'08 2.2 National Champ
 
Just Zach's Avatar
 
Join Date: Nov 2006
Location: UTRCRC
Posts: 5,585
Default

Quote:
Originally Posted by TEDROCKZ View Post
No, because the 13c just will fit on the Axial aftermarket front axle mount. The 30c's are about 1-1/4'" longer the the 13c
It probably won't fit but there is a 20c 1350 Pro Lite pack that is the identical size to the old 1320 13c. I think that would make an awesome pack on an Axial.
Just Zach is offline   Reply With Quote
Old 05-18-2009, 09:39 PM   #24
I wanna be Dave
 
Join Date: Jan 2008
Location: Arat Alabama
Posts: 2,678
Default

Quote:
Originally Posted by Just Zach View Post
It probably won't fit but there is a 20c 1350 Pro Lite pack that is the identical size to the old 1320 13c. I think that would make an awesome pack on an Axial.
This is true, I got one of these packs as well it fits perfect...

Just got these 30c's charged and got some run time on them. Woke my little berg rig right up
Also changed from 45t to 35t HH handwounds w/ 13 & 14t pinions

Last edited by TEDROCKZ; 05-18-2009 at 09:43 PM.
TEDROCKZ is offline   Reply With Quote
Old 05-19-2009, 05:51 AM   #25
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

Quote:
Originally Posted by BMFOTP View Post
is this bad manners to post the above battery in this thread??? i am not sure what is good manners concerning such issues
I guess someone thought it was. I posted information that would have been helpful in your quest for a new battery, but it was deleted by someone else.
JeremyH is offline   Reply With Quote
Old 05-19-2009, 06:48 AM   #26
I wanna be Dave
 
Join Date: Jul 2008
Location: appleton
Posts: 2,067
Default

I ordered two of these about 3weeks ago and still have not recieved them how long does it take i left them a email and got no answer what your thoughts zac.Not really complaining but i ordered because i need them are they out of stock.

Chris
kasper is offline   Reply With Quote
Old 05-19-2009, 07:39 AM   #27
'08 2.2 National Champ
 
Just Zach's Avatar
 
Join Date: Nov 2006
Location: UTRCRC
Posts: 5,585
Default

Quote:
Originally Posted by kasper View Post
I ordered two of these about 3weeks ago and still have not recieved them how long does it take i left them a email and got no answer what your thoughts zac.Not really complaining but i ordered because i need them are they out of stock.

Chris
Honestly I have no clue. I'm just sponsored by them and have little contact with them. Sorry I couldn't be more help. If you call Thunder Power they are very helpful.
Just Zach is offline   Reply With Quote
Old 05-19-2009, 08:00 AM   #28
Quarry Creeper
 
Join Date: Feb 2009
Location: Richmond, VA
Posts: 379
Default

Quote:
Originally Posted by JeremyH View Post
I guess someone thought it was. I posted information that would have been helpful in your quest for a new battery, but it was deleted by someone else.
coild you pm me the informato that you posted so i can read the info
BMFOTP is offline   Reply With Quote
Old 05-19-2009, 08:23 AM   #29
I wanna be Dave
 
Join Date: Sep 2005
Location: Houston, TX
Posts: 16,952
Default

Quote:
Originally Posted by BMFOTP View Post
coild you pm me the informato that you posted so i can read the info
Sure.
JeremyH is offline   Reply With Quote
Old 05-19-2009, 03:04 PM   #30
I wanna be Dave
 
Join Date: Jan 2008
Location: Arat Alabama
Posts: 2,678
Default

Quote:
Originally Posted by kasper View Post
I ordered two of these about 3weeks ago and still have not recieved them how long does it take i left them a email and got no answer what your thoughts zac.Not really complaining but i ordered because i need them are they out of stock.

Chris
Took me 8 days through A-Main. Guess they ship these(lipos) by ground only...Usually take 2-3 days on anything else.

But they are worth the wait, been running them some more today trying to get them in a stall situation. Got two stubs so far

Last edited by TEDROCKZ; 05-19-2009 at 03:07 PM.
TEDROCKZ is offline   Reply With Quote
Old 05-20-2009, 09:40 AM   #31
I wanna be Dave
 
Join Date: Sep 2008
Location: behind the wheel of a monster truck...
Posts: 2,878
Default

Quote:
Originally Posted by Jeepial View Post
Soon is now...Just ordered me one off Horizon..Also nabed me up one of the new Thunder Power 610c chargers....Hey Zach,do you know if the thunder power power supply will work with that charger..I can't get thunder power to answer me...
I also called back and had a 2200 Pro Power 3s 30c 11 volt sent with my order...So I am gonna try the 1350 and the 2200 and see works out better..I got worried that the 1350 might not have long enough run times for me in my Bully..Hey Zach,what kinda run times were you getting out of one in your berg?
Jeepial is offline   Reply With Quote
Old 05-20-2009, 12:20 PM   #32
'08 2.2 National Champ
 
Just Zach's Avatar
 
Join Date: Nov 2006
Location: UTRCRC
Posts: 5,585
Default

Quote:
Originally Posted by Jeepial View Post
I also called back and had a 2200 Pro Power 3s 30c 11 volt sent with my order...So I am gonna try the 1350 and the 2200 and see works out better..I got worried that the 1350 might not have long enough run times for me in my Bully..Hey Zach,what kinda run times were you getting out of one in your berg?
I usually get a half an hour plus. I'll usually switch packs after 2 courses just to be safe but I've never put more then 500 mah back into them and its usually closer to 400 mah. It might be pushing it but I think I could run a 5 course comp on 1 1350 pack in my berg.
Just Zach is offline   Reply With Quote
Old 05-20-2009, 12:27 PM   #33
I wanna be Dave
 
Join Date: Sep 2008
Location: behind the wheel of a monster truck...
Posts: 2,878
Default

Quote:
Originally Posted by Just Zach View Post
I usually get a half an hour plus. I'll usually switch packs after 2 courses just to be safe but I've never put more then 500 mah back into them and its usually closer to 400 mah. It might be pushing it but I think I could run a 5 course comp on 1 1350 pack in my berg.
Thanks Zach..I was just curious about run times..But I did go ahead and get a 2200 Pro Power added to my order with the 1350 and the new Thunder Power 610c charger with built in balancer and a 1205 power supply..Can't wait to try them all out..
Jeepial is offline   Reply With Quote
Old 05-20-2009, 12:43 PM   #34
'08 2.2 National Champ
 
Just Zach's Avatar
 
Join Date: Nov 2006
Location: UTRCRC
Posts: 5,585
Default

Quote:
Originally Posted by Jeepial View Post
Thanks Zach..I was just curious about run times..But I did go ahead and get a 2200 Pro Power added to my order with the 1350 and the new Thunder Power 610c charger with built in balancer and a 1205 power supply..Can't wait to try them all out..
I absolutely love my 610c charger
Just Zach is offline   Reply With Quote
Old 05-20-2009, 12:53 PM   #35
I wanna be Dave
 
Join Date: Sep 2008
Location: behind the wheel of a monster truck...
Posts: 2,878
Default

Quote:
Originally Posted by Just Zach View Post
I absolutely love my 610c charger

Sweet,I was wondering about the charger,hadn't really heard anything about it on here..Sounds like I made some good buys with all my stuff..
Jeepial is offline   Reply With Quote
Old 09-04-2009, 09:12 AM   #36
RCC Addict
 
Siggy's Avatar
 
Join Date: Apr 2008
Location: Singapore
Posts: 1,742
Default

Just arrived yesterday.

Name:  tp2250.jpg
Views: 73
Size:  50.9 KB

2250mAh 3S 45C Continuous/90C Burst (101A/202A)
Tried them out -- even on a stock mabuchi motor , fast is seriously an understatement!
Siggy is offline   Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 11:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com