|
| LinkBack | Thread Tools | Display Modes |
07-17-2012, 01:36 AM | #1 |
Quarry Creeper Join Date: Feb 2011 Location: A stupid town
Posts: 458
| Tekin brushless system for wraith Tekin RS 13.5 Sensored Brushless System Has anyone ran this in their wraith or crawler? I like the tekin brand and like how small the esc is. Thanks! |
Sponsored Links | |
07-17-2012, 06:17 AM | #2 |
Pebble Pounder Join Date: Aug 2011 Location: Gresham, OR
Posts: 146
| Re: Tekin brushless system for wraith
That setup will work fine, but the MMP ESC with a Tekin 13.5 or pro4 is more common. Read the stickies in the Wraith forum, all your questions can be answered there.
|
07-22-2012, 10:32 PM | #3 |
Pebble Pounder Join Date: Aug 2011 Location: San Antonio TX
Posts: 169
| Re: Tekin brushless system for wraith
Well I had a 13.5 in my wraith for a while, if yours is heavy, or planning to be, go with the pro4. My 13.5 got a lil to warm for me. I run an RX8 pro4 3300
|
07-22-2012, 11:35 PM | #4 |
Quarry Creeper Join Date: Feb 2011 Location: A stupid town
Posts: 458
| Re: Tekin brushless system for wraith
@choppermech11 Do you like that setup? Does it crawl good? With the rx8 and pro 4? |
07-23-2012, 10:18 AM | #5 |
RCC Addict Join Date: Nov 2011 Location: the not so white north
Posts: 1,299
| Re: Tekin brushless system for wraith
My Bro is running an rs pro and a 13.5 redline in his ridgecrest and works great!!! I think it's better suited to the lighter rig then the wraith but will work in the wraith. For the wraith I would go with rx8 and a 3300kv pro4, if you need to save a couple bucks the mmp will do the job just fine. Just my 2 cents
|
07-23-2012, 10:40 AM | #6 |
Pebble Pounder Join Date: Aug 2011 Location: San Antonio TX
Posts: 169
| Re: Tekin brushless system for wraith |
07-23-2012, 12:20 PM | #7 |
RCC Addict Join Date: Feb 2008 Location: Tekin, ID
Posts: 1,940
| Re: Tekin brushless system for wraith
I ran the RX8 and a 3300 Pro4 at Axialfest in my Wraith on 2S, it was perfect. I now have a 3000kV ROC412 motor (they are coming very soon now!)
|
07-27-2012, 04:59 PM | #8 | |
Rock Crawler Join Date: Oct 2008 Location: Italy
Posts: 544
| Re: Tekin brushless system for wraith Quote:
which are the main differences from ROC to pro4? my friends and i run all RX8 with 3300 and 4000 (me) thanks Angelo Italy | |
07-27-2012, 05:20 PM | #9 |
I wanna be Dave Join Date: Feb 2007 Location: BFE, NV
Posts: 2,324
| Re: Tekin brushless system for wraith |
07-27-2012, 07:46 PM | #10 |
Pebble Pounder Join Date: Aug 2011 Location: San Antonio TX
Posts: 169
| Re: Tekin brushless system for wraith |
07-28-2012, 06:00 AM | #11 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Re: Tekin brushless system for wraith
The ROC412 is the Pro4 with a different rotor and more specific winds for Crawlers, last Jim told me. The most popular Brushless combo for the Wraith I sell is the 13.5 Tekin with an RS or MMP speedo. The 3300kv Pro4 motors are also pretty popular, but they are amp hogs and break parts easily. We have some 1/8" shaft rotors arriving in a few days as well for folks that want the convenience of the standard pinions, and you can bet we will get the ROC412 as soon as they are available! I put in my backorder a year ago |
07-28-2012, 08:20 AM | #12 |
Quarry Creeper Join Date: Dec 2010 Location: Phelan California
Posts: 370
| Re: Tekin brushless system for wraith
I run the tekin 13.5 rs system in my wraith on 2s and love it. on 3s I broke a lot of parts but on 2s it is great and smooth but still fast when I pull the trigger.
|
Tekin brushless system for wraith - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wraith brushless system | XJkid93 | Electronics | 23 | 08-11-2012 11:48 AM |
| |