RCCrawler Forums - m2 dig ?

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Electronics (http://www.rccrawler.com/forum/electronics/)

- - m2 dig ? (http://www.rccrawler.com/forum/electronics/435197-m2-dig.html)

lower class customs

03-18-2013 10:10 PM

m2 dig ?

im new here and to crawling so please forgive me if this has been ask 324442 time before by newbees but any help would be appreciated.......i just put togethe my axial xr10 with the novak m2 dig esc,is there any way to set-up dig using the 3rd channel on my sky fly gt3b?

Abrown83

03-19-2013 12:31 AM

In not familiar with the gtb but generally yes, you can setup the m2 with any 3rd channel.

hibbs

03-19-2013 04:16 AM

Re: m2 dig ?

Did you try here? http://www.rccrawler.com/forum/elect...er-thread.html

Charlie-III

03-19-2013 04:28 AM

Re: M2 dig ?

Stock or hacked GT3B? I believe the stock GT3B will do it, hacked will definitely do it.

I ran a hacked GT3B & a M2 dig. It worked "OK" but I ended up with dual ESC's, much better control.

lower class customs

03-19-2013 07:21 AM

Re: M2 dig ?

Quote:

Originally Posted by Charlie-III (Post 4235965)

Stock or hacked GT3B? I believe the stock GT3B will do it, hacked will definitely do it.

I ran a hacked GT3B & a M2 dig. It worked "OK" but I ended up with dual ESC's, much better control.

it stock............i think hacking one is a bit over my head at this time,would rather just go buy a little nicer radio if need be

Charlie-III

03-19-2013 10:45 AM

Re: M2 dig ?

Quote:

Originally Posted by lower class customs (Post 4236057)

It's stock............I think hacking one is a bit over my head at this time, I would rather just go buy a little nicer radio if need be

I would go through the motions and see if it works, seeing as you already have everything.8)

lower class customs

03-19-2013 02:50 PM

Re: M2 dig ?

Quote:

Originally Posted by Charlie-III (Post 4236291)

I would go through the motions and see if it works, seeing as you already have everything.8)

iv tried and i can get the led lights changing in and out of dig just like they should.....the problem i have(and agian im completely new to this and learning as i go,i could be doing something wrong or be misunderstanding something)is that its just a 2 pos. 3rd channel(on/off) i think on this radio.....my understanding is it needs to be a 3pos. 3rd channel(front dig/neutral/rear dig) is that right???.....thanks for your help

heyok

03-19-2013 03:47 PM

Re: m2 dig ?

Here's another option to give you all three dig modes using a two position channel:
http://www.rccrawler.com/forum/vendo...n-channel.html

Charlie-III

03-19-2013 03:54 PM

Re: m2 dig ?

Quote:

Originally Posted by lower class customs (Post 4236611)

Yeah, sounds like you're correct. I didn't have time to see if the stock 3rd channel is a 3 position or not.

Short term, contact HeyOK.
Long term, get your TX hacked.

Quote:

Originally Posted by heyok (Post 4236679)

Here's another option to give you all three dig modes using a two position channel:
http://www.rccrawler.com/forum/vendo...n-channel.html

Sounds good bud, thanks for the assist.8)

lower class customs

03-19-2013 04:32 PM

Re: m2 dig ?

awsome guys thanks for your help and for not making me feel stupid for asking a new guy question

All times are GMT -6. The time now is 04:26 AM.