Go Back   RCCrawler Forums > RCCrawler General Tech > Electronics
Loading

Notices

Thread: Quick question on modding CPU power supply

Reply
 
LinkBack Thread Tools Display Modes
Old 09-20-2013, 03:21 AM   #1
Quarry Creeper
 
Join Date: Jan 2011
Location: vincennes 2 hours south of indianapolis
Posts: 398
Default Quick question on modding CPU power supply

I have a model okia 450w. Do I have to connect all the red wires black wires and such or can you just use say 4-5 of each. I'm lost on this as the thread here says use them all but I've read some others where they aren't using all of them. It is a atx in case you were wondering and ill post a pic of it. Thanks for the help in advance.
chattinfarms is offline   Reply With Quote
Sponsored Links
Old 09-20-2013, 05:49 AM   #2
Tzi
Quarry Creeper
 
Join Date: Mar 2006
Location: Australia
Posts: 495
Default Re: Quick question on modding CPU power supply

Join the green one(power on) to a black one so it turns on straight away when you hit the built in power switch, and then just use a few of each color... snip off or desolder the rest.
Just watch those capacitors near the red/black wires as they might still be charged.

Orange = 3.3v
Red = 5V
Yellow = 12V
Black = Ground
Green = power-on (connect to ground)

http://pinouts.ru/Power/atxpower_pinout.shtml

Last edited by Tzi; 09-20-2013 at 05:52 AM.
Tzi is offline   Reply With Quote
Old 09-20-2013, 06:12 AM   #3
RCC Addict
 
Join Date: Jan 2012
Location: Sweden
Posts: 1,809
Default Re: Quick question on modding CPU power supply

What Tzi said: Use all of the yellow ones for the 12V, and an equal amount of the black ones. Then you can use one red and black to feed the cooling fan.
Olle P is offline   Reply With Quote
Old 09-20-2013, 12:59 PM   #4
Quarry Creeper
 
Join Date: Jan 2011
Location: vincennes 2 hours south of indianapolis
Posts: 398
Default Re: Quick question on modding CPU power supply

Thanks very much. It isn't charged anymore was put away few years ago cause it was outdated. I made sure it came on then I discharged it. Thanks for concern though
chattinfarms is offline   Reply With Quote
Old 09-20-2013, 02:15 PM   #5
Quarry Creeper
 
Join Date: Oct 2004
Location: Cow crap flats
Posts: 341
Default Re: Quick question on modding CPU power supply

I use them in groups of 3 or so and make multiple outputs. same with the 5v rail, and added a female usb pigtail to one and various other rc related pigtails 1 for my servo tester another as a rx male output plug for testing various radio functions. I leave an rx (old am) permanently hooked up to another for testing led setups or whatever and i can charge my phone while in there.
envious8420 is offline   Reply With Quote
Old 09-20-2013, 05:02 PM   #6
Quarry Creeper
 
Join Date: Jan 2011
Location: vincennes 2 hours south of indianapolis
Posts: 398
Default Re: Quick question on modding CPU power supply

Do I need a 5v and ground for USB hook up. I have a dual USB connection out of the computer and would like to add it also
chattinfarms is offline   Reply With Quote
Old 09-20-2013, 09:12 PM   #7
Quarry Creeper
 
Join Date: Oct 2004
Location: Cow crap flats
Posts: 341
Default Re: Quick question on modding CPU power supply

yeah power and ground. and when you strip the sheath on the usb cable, use the red wire to power and black is ground.
envious8420 is offline   Reply With Quote
Old 09-21-2013, 01:45 AM   #8
Quarry Creeper
 
Join Date: Jan 2011
Location: vincennes 2 hours south of indianapolis
Posts: 398
Default Re: Quick question on modding CPU power supply

Ok everything works flawless. Did not use load resistor but hooked to LEDs up and have 12 volts and 5 amps but still have a problem with USB as it won't power on my phone. Do I need to do anything with the green and yellow wire coming off of the USB plug. I know it works cause I tested it before I tore it all apart. In case you need to know I have the two LEDs and the USB pulling off of a single red and black wire.
chattinfarms is offline   Reply With Quote
Old 09-21-2013, 10:18 AM   #9
Quarry Creeper
 
Join Date: Oct 2004
Location: Cow crap flats
Posts: 341
Default Re: Quick question on modding CPU power supply

some phones will not work off of the usb i have found, my samsung works but my droid wont my wifes work phone wont work but her bberry does.
envious8420 is offline   Reply With Quote
Old 09-21-2013, 12:49 PM   #10
Quarry Creeper
 
Join Date: Jan 2011
Location: vincennes 2 hours south of indianapolis
Posts: 398
Default Re: Quick question on modding CPU power supply

I'm using an IPhone 5 that worked on the computer charging but doesn't now so I'm guessing I need those other wires
chattinfarms is offline   Reply With Quote
Reply



Quick question on modding CPU power supply - Similar Threads
Thread Thread Starter Forum Replies Last Post
Modding a PC Power Supply into a 12 Volt Supply for your DC charger TwistedXT Electronics 166 05-22-2019 07:28 PM
i need help wiring a cpu fan to a pc power supply warren Chit Chat 4 12-22-2012 10:41 PM
Comm lathe power supply question Chevdog Electronics 5 08-18-2011 08:31 PM
DC Power Supply Question du4x4 Electronics 15 06-16-2011 03:50 PM
power supply/charger question? jeepster73 Newbie General 4 02-12-2010 06:28 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com