Finally Got Micros Done

[jaloos]

After a bunch of research and very good advice from people on the forum I finally got around to mashing the cc sidewinder micros along with a cc bec.

All thats left to do is hook her up and wait for the smoke LOL and shrink wrap the sucker.

Thanks for all your help guys, really appreciate it as always.

[rangercat23]

Looks good, but are you running any protection between the boards???

I watched a guy in my club fry 2 micros, he only had electric tape between them.


.

[Charlie-III]

Originally Posted by rangercat23

Looks good, but are you running any protection between the boards???

I watched a guy in my club fry 2 micros, he only had electric tape between them.


.

Looks like foam rubber between the boards on one end. Wires on the other.

[rangercat23]

Originally Posted by Charlie-III

Looks like foam rubber between the boards on one end. Wires on the other.

I noticed that, I would be a little concerned about them shifting. Electrical tape especially the good super-33 tends to be stretchy.


.

[jaloos]

One side is cap on cap, middle is power wires from one board to the next and end is high density foam. There is also a patch of 1/16 craft foam between the bec and board. It all get shrink wrapped when done.



It all worked with no smoke so it got wrapped up.