Any thoughts on skyrc cheetah sensored brushless system?

[jebster]

so i'm looking for a pretty inexpensive brushless system to run in a scaler. saw the following: Cheetah 1/10 60A Sensored Combo i would probably pick up the 13.5T for my needs.
just curious if any has experience with this system. looks promising for the price. i realize it won't have the tunability of some of the bigger names (holmes, castle, etc.) but that is ok.
for reference my other option is a traxxas vxl-3s with 3500 brushless system.

[JatoTheRipper]

This is the sensored, brushless system I use in my SCX10.

ESC: Hobby King 35A Sensored/Sensorless Car ESC (1:10/1:12) (USA warehouse)
17.5T Motor: Turnigy TrackStar 17.5T Sensored Brushless Motor 2270KV (USA Warehouse)
13.5T Motor: Turnigy TrackStar 13.5T Sensored Brushless Motor 3040KV

[jebster]

Originally Posted by JatoTheRipper

This is the sensored, brushless system I use in my SCX10.

ESC: Hobby King 35A Sensored/Sensorless Car ESC (1:10/1:12) (USA warehouse)
17.5T Motor: Turnigy TrackStar 17.5T Sensored Brushless Motor 2270KV (USA Warehouse)
13.5T Motor: Turnigy TrackStar 13.5T Sensored Brushless Motor 3040KV

How is that working for you? Low end control? Speed? Any complaints?

[Ohioskills]

iv seen a few ppl run it an it seems pretty good for them price

[JatoTheRipper]

Originally Posted by jebster

How is that working for you? Low end control? Speed? Any complaints?

I love it! It was suggested to me by another member of this site that happens to be a member of a local crawling club. He's also had great luck with his and I believe he has bought more of these systems. And I know he said at least one other person in the club has since gotten this system. I have zero complaints.

[Robny]

I was also looking for a cheap combo, and this had great reviews:

Have it installed but not used but build quality seems great so far, censored and 4 pole

HobbyWing Xerun SCT Pro C3 3656SD 3400kv Sensored Brushless Combo for 1/10/th & 1/8th Scale SCT & Buggy

[jebster]

Originally Posted by Robny

I was also looking for a cheap combo, and this had great reviews:

Have it installed but not used but build quality seems great so far, censored and 4 pole

HobbyWing Xerun SCT Pro C3 3656SD 3400kv Sensored Brushless Combo for 1/10/th & 1/8th Scale SCT & Buggy

probably an ok system it is quite a bit more ($190) than the combo i'm looking at ($60).

[Robny]

Originally Posted by jebster

probably an ok system it is quite a bit more ($190) than the combo i'm looking at ($60).

Oops, sorry - that is quite a difference.

[jebster]

Originally Posted by JatoTheRipper

This is the sensored, brushless system I use in my SCX10.

ESC: Hobby King 35A Sensored/Sensorless Car ESC (1:10/1:12) (USA warehouse)
17.5T Motor: Turnigy TrackStar 17.5T Sensored Brushless Motor 2270KV (USA Warehouse)
13.5T Motor: Turnigy TrackStar 13.5T Sensored Brushless Motor 3040KV

getting closer to making a purchase. anyone have the programming card? which one is compatible? does it allow for drag brake?

[Richterat83]

any issues running only a 35A esc? Drawbacks to the lower amperages?

[lordraptor1]

dont know about for crawler duty but i use the skyrc cheetah 8.5T 4000kv in my associated T4 and i have no complaints. no issues thus far with it.

i would however relay my experience with the velineon systems and say avoid those like the plague, went through 4 of them in a month they kept burning up a phase in the esc making them only usable for brushed motors which is not what you are paying for, also note traxxas kept giving me excuse after excuse telling me i was doing somethign wrong ( which i found odd seeing the velineon was in a rustler vxl with factory gearing.

ANYWAY, the skyrc cheetah units are good i think. and for the price definatley best bang for your buck.

[Tommy23490]

I used one in a B44.3 and was happy with it. I think it was the 8.5t

[durok]

The question is over 3 years old, guys....

[BCRC84]

It might be three years old but people like me still come to look up information. This has convinced me to pick one up to replace the stock esc that keeps over heating for no reason in my trailrunner.

[Druxus]

Haha, well now it's a 8 year old question. It was 3 years old in 2017.




.