Castle BEC, Holmes RX bypass not working

[MIcrawler]

Hey Guys, just got a Holmes Hobbies servo, rx bypass and a castle BEC.

I can plug the servo into the receiver and it works no problems.

I have soldered the BEC to the ESC Power and Ground.

Plug bypass into receiver and the red/black to servo and the other to the BEC and the servo does nothing...

I tested and am getting 7.32V on the black/red going to servo

See pictures below at the link

https://www.dropbox.com/sh/5os2pa55i...K0BmkzPNa?dl=0

Please help......

[SINister]

Looks like you need to swap the plugs. The plug with three wires needs to go the servo so it can get signal from the RX

[MIcrawler]

maybe I am misunderstanding it, the BEC plugs into 1 female and the servo goes into the female with Red/Black and the yellow black goes to the receiver??

the idea of the Y plug was to move the Red power directly to the Servo I thought, I had one of these on a truck 5 years ago but I cant remember and I have been out of RC for 5 years lol

[MIcrawler]

I thought about what you were saying again and it dawned on me that the ervo side needed to be into the 3 wire female and the bec side into the 2 wire female as just like you said the servo was getting no signal.....



thanks sinister

[SINister]

NP glad to help