|
| LinkBack | Thread Tools | Display Modes |
09-29-2016, 06:24 PM | #1 |
Rock Stacker Join Date: Sep 2016 Location: Nor-Cal
Posts: 61
| TX/RX for a hacked Turnigy 9X
Hey guys, So I have my first XR10 being mailed to me and I have a Turnigy 9x remote ready for it, but I realized I dont have a RX, and sort of a TX for it. Is there a simple combo that anyone has that works well? I do have a OrangeRX 2.4 module for it, but no RX for it and it has been a pain to use with a drone I have. It doesnt remember bindings so I'd rather not, but I just want some recommendations. |
Sponsored Links | |
09-30-2016, 12:28 AM | #3 |
Newbie Join Date: Dec 2011 Location: sl,ut
Posts: 12
| Re: TX/RX for a hacked Turnigy 9X
That rx has 3 pins on each channel. If your having issues with a spektrum module not keeping bind. I dont think this is will be any better as it is just a knock off spektrum rx.
|
10-03-2016, 04:18 PM | #4 |
Rock Crawler Join Date: May 2016 Location: SoWIs
Posts: 618
| Re: TX/RX for a hacked Turnigy 9X
You could get a Turnigy or flysky module for fairly cheap and the $5-8 Flysky/Turnigy 3ch receiver. I have nearly a dozen models with a new model GT3C and they're rock solid & never interfered with Spektrum/Futaba/etc radios among my group. The orange receiver linked above should work, presuming your tx is the dsmx/dsm2 model. |
10-03-2016, 11:40 PM | #5 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: TX/RX for a hacked Turnigy 9X
I would recommend getting a Frsky module https://alofthobbies.com/frsky-xjt-j...ry-module.html Also, you said a hacked 9x. What firmware is in it and/or hardware? I would highly recommend checking out ER9X http://openrcforums.com/forum/downlo...4653c56045f81d |
10-04-2016, 01:19 AM | #6 |
Rock Crawler Join Date: May 2016 Location: SoWIs
Posts: 618
| Re: TX/RX for a hacked Turnigy 9X
Personally I'd rather get an FS-i6 & upgrade the firmware for that price. I've seen tests well past a mile and for $13 over that module you also get a receiver. It can also work with their 3ch receivers & 8ch with the upgraded firmware. The frsky would be for doing crazy range, FPV, telemetry, etc - not really for an XR10.
|
10-04-2016, 02:11 AM | #7 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: TX/RX for a hacked Turnigy 9X
frsky has a rock solid connection....I would trust it way more than any flysky connection. And they have cheaper modules than the xjt, but the xjt has all the fancy goodies if the firmware supports them (I'm pretty sure er9x does). Stuff like model matching (So your model memory is bound to a specific rx). Cheaper one (DJT) https://alofthobbies.com/frsky-djt-j...ry-module.html And rx's are affordable. Small and light https://alofthobbies.com/frsky-v8r4-...-receiver.html |
10-04-2016, 02:50 AM | #8 |
Rock Crawler Join Date: May 2016 Location: SoWIs
Posts: 618
| Re: TX/RX for a hacked Turnigy 9X
I don't want to sound like a jerk, but you do realize that XR10 = slow crawler, right? Not a fpv quad, not a waypoint plane, etc. Frsky may have a rock-solid connection, but so far my 7mo old GT3C has had less issues than any of the Futaba, HiTec, Spektrum, etc that my buddies use - and their issues aren't from a radio messing with their signal like some old Flyskys did to some crappy Spektrum receivers. For a single model, maaaybe the Frsky. If you will only do surface with that & may get more models, get a take-off Flysky module & $5 receivers. |
10-04-2016, 09:00 AM | #9 | |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: TX/RX for a hacked Turnigy 9X Quote:
Their stuff is great for the price but FrSky is even better. The only reason I don't sell FrSky mods for the gt3b/c is because the soldering involved is too much for avg Joe. But if you have a 9x that a module can just plug into it then it's well worth it. | |
10-04-2016, 10:07 AM | #10 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: TX/RX for a hacked Turnigy 9X |
10-04-2016, 05:50 PM | #11 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: TX/RX for a hacked Turnigy 9X |
Tags |
crawler, receiver, transmitter, turnigy |
TX/RX for a hacked Turnigy 9X - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
i hacked it at last!!! | Awesome-Sauce RC | Electronics | 8 | 12-11-2013 11:59 AM |
Hacked up JK | passinby | Axial SCX-10 | 5 | 03-02-2011 09:13 PM |
hacked rc10gt | diyfer | Paint and Body | 2 | 07-06-2008 06:51 PM |
hacked up kongs, my way | wally187 | Tires and Wheels | 5 | 03-27-2005 09:56 PM |
| |