My 2013/2014 RcbroClassicut Remedy3.5

[Monstergt]

Its a new year and time for a new build. I first laid eye's on the new Remedy Chassis when it was still on paper. I told Derrick (M_Energy) then that I wanted one if he decided to produce. After a few months of waiting we have what I present here. Alot of my parts are transferring over from my old Berg, but 90% are new.

Specs:

Front Axle:
Classicut Case
Classicut Battery Mount
Big Ron Electronic Mount
Drilled Gears (Rcbro Machined Gears next)
Vp XR Bent Tie Rod
Vp Wraith Drag Link
Vp 8* Chubs and Knuckles with Big Bearing Mod By Jeepin Doug
Rcbro Tubes
SDS 300's With Fresh Rebuild
SDS 3rd Gear

Rear Axle:
Classicut Case
CreeperBob lightweight Berg Rear Shafts
RcBro Tubes with 4mm Ti Bolts
Drilled Gears (Rcbro Machined Gears Next)
SDS 3rd Gear

Chassis:
Remedy 3.5
Dlux 1/8" Ti Uppers
Rear Lowers are 4MM Ti from Krawler Kellar
From Lowers are 3/16" From Barry at Classicut

Electronics:
Hitec 7950
Castle BEC
Holmes BR-Mini's X2
Holmes 500 Pullers 30T X2

Tires and Wheels:
T1E 3 Piece CF
CI Foams
Shaved and Siped Rovers

This is how the chassis is received from BDN. The fit and finish is beyond stellar. As soon as I received the chassis I tore it apart to sand all the edges and glue for reinforcement.

[Monstergt]

More to come tomorrow

[ittybitty]

Holy chit...you started a build thread...maybe you're not as lazy as I was beginning to think

Is it ready for this weekend yet?

[Monstergt]

Originally Posted by ittybitty

Holy chit...you started a build thread...maybe you're not as lazy as I was beginning to think

Is it ready for this weekend yet?

I hate doing build threads. Though with this being a new chassis and primarily designed around XR axles I thought I'd do a build thread.

No it won't be ready. You can fondle it though and dream!!

[Monstergt]

After seeing the Rcbro tubes I knew I had to have them. There lighter and stronger than other tubes on the market. The fit and finish is awesome. When you combine the tubes with the new ClassiCut cases we have the Perfect Remedy!!



I had Will at Rcbro mount all of my link mounts for me. When I received them back I replaced the 3mm screws in the mounts with 4MM Titanium. After getting all the mounting done I got them all polished. Glides over the rock alot easier.

[Crawllife]

These tubes look amazing Monstergt!

[Monstergt]

Originally Posted by Crawllife

These tubes look amazing Monstergt!

Thanks, but all the credit goes to Will

[Monstergt]

Almost roller status.

[ittybitty]

So is that photoshoped? You say "almost" roller, yet it has wheels/tires on it...just trying to understand...after a few tequila shots and beer

[ittybitty]

So evidently I was too inebriated to realize that you had no wheel nuts installed...that would mean that it's "almost a roller"

Sorry...too much beer.

[M_ENERGY]

Looking really good man!! Can't wait to start tuning this rig!!! Great build fo sho!!!

[Monstergt]

Originally Posted by ittybitty

So evidently I was too inebriated to realize that you had no wheel nuts installed...that would mean that it's "almost a roller"

Sorry...too much beer.

You'd be correct. No hubs either. Hub less wheels with pin drive only

[ittybitty]

If you're still up you better have this rig ready to compete tomorrow. I'ts taking all I've got to type out a message that is undertandable...Jon is laughing his ass off while I am employing the "hunt and peck" method of typing....there's more hunting going on than anytyhing at this point.

You gonna drive this rig at the Southern Showdown?

[RcBro]

Looks killer!

[Crawllife]

Originally Posted by Monstergt

Thanks, but all the credit goes to Will

I have a set coming;)

[Monstergt]

Originally Posted by M_ENERGY

Looking really good man!! Can't wait to start tuning this rig!!! Great build fo sho!!!

Thanks for all your help on this.

[obebaldone1]

Looks Killer.. I so dig the RC bro tubes matched with them cases.