RCCrawler Forums

flmudder · 06-22-2009, 04:18 PM

about as ready as i can get i think

badBKO · 06-22-2009, 04:56 PM

Does anyone know if the 'hitches' have to be the same hieght for the sled pull?

CRAWL UGLY · 06-23-2009, 10:18 AM

Quote:

Originally Posted by badBKO

Does anyone know if the 'hitches' have to be the same hieght for the sled pull?

I was trying to buy a hitch an adjustable one that we could bolt up to the frame rails of each rig but thats to time consuming and right now there out of stock :-( so I was thinking that everyone must pull from there frame somewhere on the back or on the body. But no axle pulling or from a four link plate etc..it won't be exact b/c there are so many different size vehicles but the best way I could think of. At least this way it will still incorporate the suspension.

and as far as being ready goes I almost have a roller

badBKO · 06-23-2009, 01:43 PM

Quote:

Originally Posted by CRAWL UGLY

I was trying to buy a hitch an adjustable one that we could bolt up to the frame rails of each rig but thats to time consuming and right now there out of stock :-( so I was thinking that everyone must pull from there frame somewhere on the back or on the body. But no axle pulling or from a four link plate etc..it won't be exact b/c there are so many different size vehicles but the best way I could think of. At least this way it will still incorporate the suspension.

and as far as being ready goes I almost have a roller

Ok, just wondering, some people will probably have alittle advantage, but they'll probably need it!!

Warn Off Road · 06-23-2009, 02:41 PM

Got out early from work.....so im going out there to practice with the new rigs

I also got 2 dozen orange rubberish markers (about 3" dia) from work incase we need more boundries.

Warn Off Road · 06-23-2009, 02:45 PM

what about this for a charger http://cgi.ebay.com/Turnigy-Accucel-...3A1%7C294%3A50

It's a balancer and charger, and under $80

smm_cbf · 06-23-2009, 03:11 PM

Quote:

Originally Posted by Warn Off Road

what about this for a charger http://cgi.ebay.com/Turnigy-Accucel-...3A1%7C294%3A50

It's a balancer and charger, and under $80

Yea I saw those, don't bother ordering from ebay just order from there website Hobbyking.com and you get points for ordering and I guess you can get free stuff with those points..but not sure

smm_cbf · 06-23-2009, 03:24 PM

Looks like I'll make it with the tuber..tested the electronics today and all seems fine so my guess is that water still got into the rx and cause the glitching.

smm_cbf · 06-24-2009, 10:48 PM

Put your panties back on...the chevy might be back in business

EDIT: what happens if you get stuck and can't get it unstuck? do you take like a 10sec add on for touching your rig so that you'll be able to finish?

badBKO · 06-25-2009, 04:11 PM

Quote:

Originally Posted by smm_cbf

Put your panties back on...the chevy might be back in business

EDIT: what happens if you get stuck and can't get it unstuck? do you take like a 10sec add on for touching your rig so that you'll be able to finish?

Stuck, What's that? I imagine that you could winch out and take the time as it is added on to your final time, or that's it and your through.

-Clint

smm_cbf · 06-25-2009, 04:16 PM

no working winch:-( I guess I'll just walk by and kick it and no one will know

badBKO · 06-25-2009, 07:55 PM

Quote:

Originally Posted by smm_cbf

no working winch:-( I guess I'll just walk by and kick it and no one will know

I don't need no stinkin' winch!!!!

I hope there will be a good turnout, hopefully no nitro trucks will be there to run around.

So far we got:

CRAWL UGLY
smm_cbf
southernextreme
flatfender
badBKO
Warn Off Road
rican69m
flmudder
uberalles

smm_cbf · 06-25-2009, 08:40 PM

Got the tuber running and ready, I though I was going to buy a brushless setup for the chevy but I decided that I'll just sell it.

I'll try my best to show up on time

flatfender · 06-26-2009, 12:18 AM

Quote:

Originally Posted by smm_cbf

no working winch:-( I guess I'll just walk by and kick it and no one will know

I call it the Vans winch. ;)

rdearolf · 06-26-2009, 11:17 AM

Well if mind doesnt sell this weekend I guess I will come out for a last try for awhile, till I get back on my feet again

smm_cbf · 06-26-2009, 06:23 PM

You guys ready yet

yjwill · 06-26-2009, 10:50 PM

Hell yaeh! I think Crawl Ugly might be able to give me a ride. It sounds like it should be a blast!
Will

smm_cbf · 06-26-2009, 11:53 PM

Does anybody have an extra WK axle shaft? The axle shaft on mine broke at the ball/pin end.:-(
I checked superior online and their out of stock on the shafts, so does anyone know if CPH has them?

flmudder · 06-27-2009, 02:23 AM

call them and ask

CRAWL UGLY · 06-27-2009, 09:16 AM

Sorry havent been on much I've been trying to put a truck together so I can enter Imagine that?!

Quote:

Originally Posted by smm_cbf

Put your panties back on...the chevy might be back in business

EDIT: what happens if you get stuck and can't get it unstuck? do you take like a 10sec add on for touching your rig so that you'll be able to finish?

For which event if? it is the obstacle course a 10 sec penalty sounds about right, the mud hole is based on distance and the hill climb is still up in the air on time or distance prob be a combo of both I will time you but if you don't make it will get your dist. so that way if there are alot of people that don't make it

i will still be able to give you the right amount of points

Quote:

Originally Posted by badBKO

Stuck, What's that?
-Clint

Lets hope we don't see you stuck tomorrow cuz u will never live it down

Quote:

Originally Posted by badBKO

I don't need no stinkin' winch!!!!

I hope there will be a good turnout, hopefully no nitro trucks will be there to run around.

So far we got:

CRAWL UGLY
smm_cbf
southernextreme
flatfender
badBKO
Warn Off Road
rican69m
flmudder
uberalles

Plus my dad and yjwill will be there

Quote:

Originally Posted by rdearolf

Well if mind doesnt sell this weekend I guess I will come out for a last try for awhile, till I get back on my feet again

Sucks what happened to your shop I was hopin to get a discount someday anyways hope you can make it

Quote:

Originally Posted by smm_cbf

Does anybody have an extra WK axle shaft? The axle shaft on mine broke at the ball/pin end.:-(
I checked superior online and their out of stock on the shafts, so does anyone know if CPH has them?

Man that sucks I know the perfect guy 2 on the rocks might have had one but he's on vacation right now

hope you found one

06-24-2009, 10:48 PM	#109
smm_cbf Rock Crawler Join Date: Aug 2007 Location: Orlando Posts: 512	Put your panties back on...the chevy might be back in business EDIT: what happens if you get stuck and can't get it unstuck? do you take like a 10sec add on for touching your rig so that you'll be able to finish? Last edited by smm_cbf; 06-25-2009 at 03:44 PM.

06-26-2009, 06:23 PM	#116
smm_cbf Rock Crawler Join Date: Aug 2007 Location: Orlando Posts: 512	You guys ready yet Last edited by smm_cbf; 06-26-2009 at 09:52 PM.

06-26-2009, 11:53 PM	#118
smm_cbf Rock Crawler Join Date: Aug 2007 Location: Orlando Posts: 512	Does anybody have an extra WK axle shaft? The axle shaft on mine broke at the ball/pin end.:-( I checked superior online and their out of stock on the shafts, so does anyone know if CPH has them? Last edited by smm_cbf; 06-26-2009 at 11:57 PM.

06-22-2009, 04:18 PM	#101
flmudder Quarry Creeper Join Date: Apr 2008 Location: sanford Posts: 228	about as ready as i can get i think

06-22-2009, 04:56 PM	#102
badBKO Rock Crawler Join Date: May 2007 Location: floriduh Posts: 522	Does anyone know if the 'hitches' have to be the same hieght for the sled pull?

06-23-2009, 02:41 PM	#105
Warn Off Road Quarry Creeper Join Date: Aug 2005 Location: Lake Mary Posts: 206	Got out early from work.....so im going out there to practice with the new rigs I also got 2 dozen orange rubberish markers (about 3" dia) from work incase we need more boundries.

06-23-2009, 02:45 PM	#106
Warn Off Road Quarry Creeper Join Date: Aug 2005 Location: Lake Mary Posts: 206	what about this for a charger http://cgi.ebay.com/Turnigy-Accucel-...3A1%7C294%3A50 It's a balancer and charger, and under $80

06-23-2009, 03:24 PM	#108
smm_cbf Rock Crawler Join Date: Aug 2007 Location: Orlando Posts: 512	Looks like I'll make it with the tuber..tested the electronics today and all seems fine so my guess is that water still got into the rx and cause the glitching.

06-25-2009, 04:16 PM	#111
smm_cbf Rock Crawler Join Date: Aug 2007 Location: Orlando Posts: 512	no working winch:-( I guess I'll just walk by and kick it and no one will know

06-25-2009, 08:40 PM	#113
smm_cbf Rock Crawler Join Date: Aug 2007 Location: Orlando Posts: 512	Got the tuber running and ready, I though I was going to buy a brushless setup for the chevy but I decided that I'll just sell it. I'll try my best to show up on time

06-26-2009, 11:17 AM	#115
rdearolf Quarry Creeper Join Date: Jan 2009 Location: longwood, fl Posts: 287	Well if mind doesnt sell this weekend I guess I will come out for a last try for awhile, till I get back on my feet again

06-26-2009, 10:50 PM	#117
yjwill Newbie Join Date: Jan 2007 Location: Orange City Posts: 23	Hell yaeh! I think Crawl Ugly might be able to give me a ride. It sounds like it should be a blast! Will

06-27-2009, 02:23 AM	#119
flmudder Quarry Creeper Join Date: Apr 2008 Location: sanford Posts: 228	call them and ask

Sponsored Links

RCCrawler Forums

Thread: Top Truck Challenge 6/28/09