|
| LinkBack | Thread Tools | Display Modes |
10-16-2022, 12:17 PM | #1 |
Newbie Join Date: Apr 2015 Location: Simi Valley
Posts: 12
| Anyone using Enduro Stealth X Transmission and portals?
Anyone using Enduro Stealth X Transmission and portals? I was curious with the gear reduction on the portals what would be the effect of using the stealth X trans with 0%,5% or 11% OD with any portaled axles like Capra Axles, CP43 or AR45? Any thoughts or suggestions? |
Sponsored Links | |
10-16-2022, 02:50 PM | #2 | |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,291
| Re: Anyone using Enduro Stealth X Transmission and portals? Quote:
i dont know your gear reduction would be awsome i dont know if you really want awsome gear reduction though you might break something but if you like control and torque i would give it a shot if you like the gearing you have you could aways up the teeth on your pinion gear to get your wheel speed back or run a higher voltage or higher kv | |
10-16-2022, 04:27 PM | #3 | |
Pebble Pounder Join Date: Nov 2009 Location: Newmanstown, PA
Posts: 174
| Re: Anyone using Enduro Stealth X Transmission and portals? Quote:
The overdrive differences will still be the same, as your axle ratios will still be matched albeit lower than a straight axle likely. I say go for it. One of the quietest transmissions out there IMO. | |
10-16-2022, 06:40 PM | #4 |
RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,801
| Re: Anyone using Enduro Stealth X Transmission and portals?
This is my plan as well. Goina build a 4ws with stealth trans n f10 axles. If i dont like it, may swap the trans for my VP 3 gear with dig. Definantly interested to see how your build comes out grvtyboy. Do keep us posted please sir |
10-16-2022, 07:27 PM | #5 |
Newbie Join Date: Apr 2015 Location: Simi Valley
Posts: 12
| Re: Anyone using Enduro Stealth X Transmission and portals?
Guys - Thanks for the replies. Gonna go ahead and start getting the gear to build it.
|
10-17-2022, 08:00 AM | #6 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,291
| Re: Anyone using Enduro Stealth X Transmission and portals? |
10-17-2022, 09:07 AM | #7 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: Anyone using Enduro Stealth X Transmission and portals? |
10-17-2022, 08:31 PM | #8 |
Quarry Creeper Join Date: Sep 2013 Location: Hicktown
Posts: 299
| Re: Anyone using Enduro Stealth X Transmission and portals?
Stealth uses the 48 pitch spur factory so you should be able to tune that with different spurs and pinions to help with the gearing Robinson Racing also makes a 32 pitch steel spur as well if you want to go that route With the right spur/pinion/motor combo I think you will be alright The Capra gearing is pretty tall in the stock form anyway |
Anyone using Enduro Stealth X Transmission and portals? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Transmission Direction with Portals | SteveB1 | General Crawlers | 3 | 01-29-2022 11:24 AM |
Notes about using the Stealth X transmission (Enduro trans) | Sneetches | Axial SCX10 II | 4 | 12-23-2019 03:09 PM |
Stealth X Transmission Noise | LetsBash | Element RC 1/10 Enduro Trail Truck Sendero | 6 | 10-26-2019 09:54 PM |
Which transmission is stonger, the stampede or the stealth? | JeeperoManiako | General Crawlers | 15 | 09-05-2006 03:11 PM |
stealth transmission | TLTCrawlin | Chit Chat | 22 | 07-20-2006 03:20 PM |
| |