|
![]() |
| LinkBack | Thread Tools | Display Modes |
![]() | #1 |
Quarry Creeper Join Date: Nov 2009 Location: Hickory,NC
Posts: 365
| ![]()
I got up this morning and the thought came across my mind. What will Vanquish come out with next? |
![]() | ![]() |
Sponsored Links | |
![]() | #2 |
Quarry Creeper Join Date: May 2023 Location: Hungary
Posts: 203
| ![]()
I wish they will do one bigger with 2speed 325mm wheelbase 2.2 wheels 2speed DIG Lockers by Remote and also Overdrive on , off from Remote Almost same they have now. Phoenix Portal. make it bigger and RTR. Little bit bigger and 2 speed as new thing. For boths Crawling and Trailing also. 2.2 wheels. I wish they did The best Crawl/Trail in same. 2023 one RTR should have atleast brushless kombo From Box. 35-40kg Servo Coreless 2speed with DIG and 2.2 bedlock alu-wheels 325mm wheelbase, would be a dream. TRX4 Killer because DIG and overall quality. Remote controlled Overdrive also. 2speed this way would be best seller straight away. 100% TRX4 Killer , Some one must do that now ! 2023 it is time one release with Brushless combo one RTR model . Fusion SE 1800KV 2in1 is cheap. perfect to 2 speed rigs No hop ups needed. Maybe only Tires to Hyrax only. 599$ RTR like this . and they will sell like Butter. just 50$ more than TRX4 ![]() It is possible to do.- And it will be the BESTSELLER in 3years atleast from today. Many old TRX4 owners would like new fresh better Rig offcourse. These TRX4 are old and have been out 7years soon. same rig in KIT also. KIT offcourse you build and choose electronics self I have promise not buy any more crawlers in 2-3years. Anyways this i would buy straight away. This is what world need now, new fresh TRX4 Killer Last edited by Jjay; 06-04-2023 at 06:38 AM. |
![]() | ![]() |
![]() | #3 | |
Slow is the new Fast ![]() Join Date: Nov 2013 Location: Winterpeg
Posts: 2,906
| ![]() Quote:
I say this only because there is a niche trend in that direction, I don’t actually believe it. I think it could be a long while before we see anything truly new from VP. A more realistic guess might be a new body on the existing RTR platform | |
![]() | ![]() |
![]() | #4 |
Quarry Creeper Join Date: May 2023 Location: Hungary
Posts: 203
| ![]()
There is a Market for Comp Rigs. Axial comp is sold out couple times already. Most boring is that Vanquish dont have any 2 speed rig. If they did one TRX4 killer then they would be NO1 sold RTR these days. Because TRX4 is so old. Still they sell alot of these , because there is no Competition at all. And this is so sad. If they want make alot money, then they must do TRX4 Killer now, and right after that release start also work with one Comp crawler. These two is what world needs now from trusted Brand. Chinese cars will always have their issues. Axial or Vanquish must wake up. Make that TRX4 Killer fast. Like TRX4 and DIG also. How hard can it be? |
![]() | ![]() |
![]() | #5 |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| ![]()
Someone needs to make a car like the scxpro but keep it basic and use a better chassis. Take the basic concept of the pro but use a small and light weight trans with no geegaws or other silliness. A chassis that has a few adjustment holes and an angled skid. Most chassis have a bunch of adjustments for the uppers at the chassis and that leads to people that don't have a decent grasp on geometry screwing it up and complaining that their car that THEY made terrible through bad geometry doesn't perform. That's why the old dlux pro chassis only had 2 upper holes on one end and 1 on the other end. So people couldn't screw it up. |
![]() | ![]() |
![]() | #6 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| ![]()
6x6 tow rig Hang up and Drive |
![]() | ![]() |
![]() | #7 | |
Go Buckeyes! ![]() Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| ![]() Quote:
Wouldn't that be something! ![]() ![]() | |
![]() | ![]() |
![]() | #8 | |
Slow is the new Fast ![]() Join Date: Nov 2013 Location: Winterpeg
Posts: 2,906
| ![]() Quote:
| |
![]() | ![]() |
![]() | #9 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,289
| ![]()
I was told by a vary reliable sorce its a phoenix on leaf springs Lol Last edited by ferp420; 06-04-2023 at 08:46 PM. |
![]() | ![]() |
![]() | #10 |
Quarry Creeper Join Date: Dec 2009 Location: Strafford, NH
Posts: 473
| ![]() |
![]() | ![]() |
![]() | #11 |
Quarry Creeper Join Date: Nov 2009 Location: Hickory,NC
Posts: 365
| ![]()
All really good points and ideas. Whatever it would be I'd end up with 1. Who knows maybe they are listening and reading comments.
|
![]() | ![]() |
![]() | #12 | |
RCC Addict Join Date: Jan 2007 Location: Arkansas
Posts: 1,782
| ![]() Quote:
I'm sure Vanquish could do something along those lines if they wanted to. | |
![]() | ![]() |
![]() | #13 |
Pebble Pounder Join Date: Sep 2010 Location: Lava Lands
Posts: 135
| ![]()
I would like to see a return of the builder's bundle they sold earlier. Kit form with a standard VFD, F-10 straight axles on a cheap aluminum flat rail. Keep the kit price around 300$. I'm building a trail rig with a VFD and F-10 portals on a scx10 pro flat rail chassis. Only going with that chassis because I got it for 24$. I have a super light c2 comp rig, titanium links, carbon chassis/ wheels, rhino 40a and a tiny outrunner, so I won't comp with the vanquish.
|
![]() | ![]() |
![]() | #14 | |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,562
| ![]() Quote:
I agree with you, seems like it could be fairly straight forward for them to release a basic chassis/builders kit. Flat rail or c channel, either way would be cool. Sent from my iPhone using Tapatalk | |
![]() | ![]() |
![]() | #15 |
Pebble Pounder Join Date: Jan 2022 Location: Longmont
Posts: 199
| ![]()
My best guess is we will see something kinda like the pro/ultra, but with revised axles like the F10Ts on the Pro and F10 Alloy Portals on the Ultra. Maybe with the VFD Twin in there or maybe the VFD/Dig or even a new trans that sits lower. I would love to see something more Class 1 oriented, with there new Falken RT and F10T axles maybe even a Toyota esc body. |
![]() | ![]() |
![]() |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Give A Way! Vanquish Products Revolver Beadlocks Silver on Black | RPP Hobby | RPP Hobby | 251 | 07-27-2008 07:12 PM |
lookin at gettin a new truck give me some ideas. | guy45 | Chit Chat | 9 | 01-25-2006 12:44 PM |
| |