Go Back   RCCrawler Forums > Scale Rigs General Tech > General Scale Talk
Loading

Notices

Thread: IFS/Wraith TW

Reply
 
LinkBack Thread Tools Display Modes
Old 12-05-2011, 11:21 PM   #1
Pebble Pounder
 
Join Date: May 2011
Location: Oskaloosa
Posts: 129
Default IFS/Wraith TW

Im looking for a IFS setup thats the same track width as a wraith axle, anybody have any ideas?
Unfadingpyro is offline   Reply With Quote
Sponsored Links
Old 12-06-2011, 06:54 AM   #2
I joined the Band!
 
Join Date: Mar 2010
Location: nashville,TN
Posts: 406
Default

slash 4x4? lst?
crawlinnTN is offline   Reply With Quote
Old 12-06-2011, 08:39 AM   #3
I wanna be Dave
 
Join Date: Sep 2011
Location: Douglassville, PA
Posts: 3,042
Default

HPI MT2 for the win. Even uses the same gear ratios.
OSRC is offline   Reply With Quote
Old 12-06-2011, 09:24 AM   #4
I wanna be Dave
 
Join Date: Mar 2008
Location: Wayne county. PA
Posts: 2,502
Default

yeah my vote is on the HPI MT2 diff and arms ....i have that set up in my pro 4 SCT build and was gonna go with the RC4WD short course rear axle, but now i'm going with a wraith axle instead ..........bob

....
bob1961 is offline   Reply With Quote
Old 12-06-2011, 11:27 AM   #5
Pebble Pounder
 
Join Date: May 2011
Location: Oskaloosa
Posts: 129
Default

Quote:
Originally Posted by bob1961 View Post
yeah my vote is on the HPI MT2 diff and arms ....i have that set up in my pro 4 SCT build and was gonna go with the RC4WD short course rear axle, but now i'm going with a wraith axle instead ..........bob

....
I have an HPI MT2, but it looks like it would be too wide? do you have a build thread on that?
Unfadingpyro is offline   Reply With Quote
Old 12-06-2011, 08:05 PM   #6
I wanna be Dave
 
Join Date: Mar 2008
Location: Wayne county. PA
Posts: 2,502
Default

yeah it is over on rcshortcourse forum ........bob

http://www.rcshortcourse.com/forum/g...dy-launch.html

....
bob1961 is offline   Reply With Quote
Old 12-06-2011, 08:09 PM   #7
Quarry Creeper
 
Matt.k's Avatar
 
Join Date: Sep 2006
Location: Orange, CA
Posts: 363
Default

I vote for the EXO front end myself... why not keep it all Axial?

I know, I know.. not available but will be soon...
Matt.k is offline   Reply With Quote
Old 12-06-2011, 08:45 PM   #8
Pebble Pounder
 
Join Date: May 2011
Location: Oskaloosa
Posts: 129
Default

Hmmm, i didnt know that was the same width. Does it use the same Ring/Pinion as the Wraith?
Unfadingpyro is offline   Reply With Quote
Old 12-06-2011, 09:12 PM   #9
I wanna be Dave
 
Join Date: Oct 2007
Location: Castle Rock, WA
Posts: 8,549
Default

My slash 4x4 front clip on my trophy truck is 9.75" wide, hex to hex. Szczerba's Trophy Truck Build.. With Videos
Wraith axle hex to hex is 9.57". Darn close. I run a wheely king rear axle cause the diff is centered. The Wraith is offset.
Szczerba is online now   Reply With Quote
Old 12-07-2011, 10:28 AM   #10
Pebble Pounder
 
Join Date: May 2011
Location: Oskaloosa
Posts: 129
Default

Quote:
Originally Posted by bob1961 View Post
yeah it is over on rcshortcourse forum ........bob

Pro 4 build getting ready to launch............ - RCShortCourse.com Bulletin Board

....
That looks like its gonna be bada$$
Unfadingpyro is offline   Reply With Quote
Old 12-07-2011, 11:19 AM   #11
I wanna be Dave
 
Join Date: Mar 2008
Location: Wayne county. PA
Posts: 2,502
Default

thx, if ya caught my tigress build along with my TT build well yeah it will be bada$$ .........bob

....
bob1961 is offline   Reply With Quote
Old 12-07-2011, 11:38 AM   #12
Pebble Pounder
 
Join Date: May 2011
Location: Oskaloosa
Posts: 129
Default

I saw your TT build but not the other one.
Unfadingpyro is offline   Reply With Quote
Old 12-08-2011, 01:22 PM   #13
Rock Stacker
 
Join Date: Jul 2011
Location: australia
Posts: 51
Default

you would think axial are awere how popular this set up would be and have already got the kit to add the exo front end to the wraith.if not they will miss out on some $.the first one to offer to the masses a kit to do this will make plenty of $.i hope DMG read this
wobbygong is offline   Reply With Quote
Old 12-13-2011, 12:57 PM   #14
Pebble Pounder
 
Join Date: May 2011
Location: Oskaloosa
Posts: 129
Default

After doing some investigating ive found out that the EXO uses the same Ring/Pinion as the AX10/SCX10 and Wraith.

So it looks like i might be using that



When it comes out that is...
Unfadingpyro is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com