RCCrawler Forums

92PathSE · 02-08-2011, 03:56 PM

Who wants to run Saturday? Weather is going to be nice again.

I'll be there around noon unless something comes up.

YJeep10 · 02-09-2011, 08:52 AM

We may be back out this weekend not sure see if we can get them fixed by then.

YJeep10 · 02-09-2011, 08:34 PM

I just got mine fixed back up and ready for another run. We will more than likely go this weekend but it will prob be sunday for us.

lilengine44 · 02-12-2011, 05:14 PM

Wont be making it out sunday had some problems today hopefully will be back to it next weekend

YJeep10 · 02-12-2011, 10:40 PM

Yeah I was decided to loctite my bolts on the axle housing and was not aware that it would deteriate the plastic so now i need new housing that sucks.

92PathSE · 02-13-2011, 03:20 PM

Damn, I didn't know that Loctite would do that. That sucks dude. Are you going to get that same axle or swap to something else?

YJeep10 · 02-15-2011, 05:34 PM

Yeah I was shocked. Im getting a new crawler roller and swapping my electronics and motor over. Its an AX10 with alum upgrades. It should be here thursday so I will be putting it together and we will be riding sunday prob around 2:30.

YJeep10 · 02-15-2011, 05:43 PM

I forgot to mention the other guy is getting a new one too. It will be here saturday so we will both be experimenting with new rigs, maybe we wont hold you back so much anymore

92PathSE · 02-15-2011, 07:15 PM

Dang, I don't need any competition.

Bill and I will be out on Friday, since neither of us are working. I'll try to come out Sunday too.

YJeep10 · 02-16-2011, 04:48 PM

Yeah if you can do it, we will prob be out about 3 when we get out I got softball till 2 then will probably grab something to eat and then we will be there.

Speedracer19 · 02-17-2011, 12:44 PM

Kinson & I will most likely be at Flat Rock on Sat. from around 10:30 A.M. to 3:00 P.M.
Come out if you can.

92PathSE · 02-17-2011, 07:17 PM

I can probably do that.

92PathSE · 02-19-2011, 03:42 PM

Little preview of this weekend's footage:

http://www.youtube.com/watch?v=j3ExwFgFbkM

After a great many failed attempts on gate 1 of course 1, the skinny-pedal method finally prevails. Sad part is that I had about 1000 reverse points before finally making it stick.

Check the Flat Rock video thread Sunday night or Monday for videos from the whole weekend.

Speedracer19 · 02-19-2011, 05:13 PM

Neat, i like the title.

92PathSE · 02-20-2011, 07:08 AM

It seemed appropriate. I hope nobody takes it seriously. lol

Kinson · 02-20-2011, 07:07 PM

It was a great day for practice and crawler, nice video, Will.

92PathSE · 02-21-2011, 05:52 AM

Wasn't too bad. Always nice to see you guys.

Videos will be up in this thread by tonight:
GC-3A and scalers at Flat Rock

lilengine44 · 02-24-2011, 03:16 PM

Daniel and I are plannin to go out sunday around three.

92PathSE · 03-03-2011, 06:23 AM

I planned to come out this weekend, but I won't be able to make it again. Might be raining anyways.

Mr Bill · 03-03-2011, 07:08 AM

THats cool will. Let us know when its time and well be there. Im down in pc on the beach working right now anyway. Sure the wife will have the honey do list for to catch up on being ive been gone all week.

02-08-2011, 03:56 PM	#21
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	Who wants to run Saturday? Weather is going to be nice again. I'll be there around noon unless something comes up. Last edited by 92PathSE; 02-08-2011 at 04:06 PM.

02-09-2011, 08:52 AM	#22
YJeep10 Newbie Join Date: Jan 2011 Location: West Point Posts: 33	We may be back out this weekend not sure see if we can get them fixed by then.

02-09-2011, 08:34 PM	#23
YJeep10 Newbie Join Date: Jan 2011 Location: West Point Posts: 33	I just got mine fixed back up and ready for another run. We will more than likely go this weekend but it will prob be sunday for us.

02-12-2011, 05:14 PM	#24
lilengine44 Newbie Join Date: Jan 2011 Location: Columbus Posts: 46	Wont be making it out sunday had some problems today hopefully will be back to it next weekend

02-12-2011, 10:40 PM	#25
YJeep10 Newbie Join Date: Jan 2011 Location: West Point Posts: 33	Yeah I was decided to loctite my bolts on the axle housing and was not aware that it would deteriate the plastic so now i need new housing that sucks.

02-13-2011, 03:20 PM	#26
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	Damn, I didn't know that Loctite would do that. That sucks dude. Are you going to get that same axle or swap to something else?

02-15-2011, 05:34 PM	#27
YJeep10 Newbie Join Date: Jan 2011 Location: West Point Posts: 33	Yeah I was shocked. Im getting a new crawler roller and swapping my electronics and motor over. Its an AX10 with alum upgrades. It should be here thursday so I will be putting it together and we will be riding sunday prob around 2:30.

02-15-2011, 05:43 PM	#28
YJeep10 Newbie Join Date: Jan 2011 Location: West Point Posts: 33	I forgot to mention the other guy is getting a new one too. It will be here saturday so we will both be experimenting with new rigs, maybe we wont hold you back so much anymore

02-15-2011, 07:15 PM	#29
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	Dang, I don't need any competition. Bill and I will be out on Friday, since neither of us are working. I'll try to come out Sunday too.

02-16-2011, 04:48 PM	#30
YJeep10 Newbie Join Date: Jan 2011 Location: West Point Posts: 33	Yeah if you can do it, we will prob be out about 3 when we get out I got softball till 2 then will probably grab something to eat and then we will be there.

02-17-2011, 12:44 PM	#31
Speedracer19 Rock Crawler Join Date: Apr 2008 Location: Highlands Ranch, Co. Posts: 852	Kinson & I will most likely be at Flat Rock on Sat. from around 10:30 A.M. to 3:00 P.M. Come out if you can.

Sponsored Links

02-17-2011, 07:17 PM	#32
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	I can probably do that.

02-19-2011, 03:42 PM	#33
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	Little preview of this weekend's footage: http://www.youtube.com/watch?v=j3ExwFgFbkM After a great many failed attempts on gate 1 of course 1, the skinny-pedal method finally prevails. Sad part is that I had about 1000 reverse points before finally making it stick. Check the Flat Rock video thread Sunday night or Monday for videos from the whole weekend.

02-19-2011, 05:13 PM	#34
Speedracer19 Rock Crawler Join Date: Apr 2008 Location: Highlands Ranch, Co. Posts: 852	Neat, i like the title.

02-20-2011, 07:08 AM	#35
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	It seemed appropriate. I hope nobody takes it seriously. lol

02-20-2011, 07:07 PM	#36
Kinson Pebble Pounder Join Date: Jun 2008 Location: Tallahassee, Florida Posts: 196	It was a great day for practice and crawler, nice video, Will.

02-21-2011, 05:52 AM	#37
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	Wasn't too bad. Always nice to see you guys. Videos will be up in this thread by tonight: GC-3A and scalers at Flat Rock

02-24-2011, 03:16 PM	#38
lilengine44 Newbie Join Date: Jan 2011 Location: Columbus Posts: 46	Daniel and I are plannin to go out sunday around three.

03-03-2011, 06:23 AM	#39
92PathSE Quarry Creeper Join Date: Jul 2009 Location: West GA, USA Posts: 280	I planned to come out this weekend, but I won't be able to make it again. Might be raining anyways.

03-03-2011, 07:08 AM	#40
Mr Bill Newbie Join Date: Dec 2010 Location: Panama city Posts: 44	THats cool will. Let us know when its time and well be there. Im down in pc on the beach working right now anyway. Sure the wife will have the honey do list for to catch up on being ive been gone all week.

RCCrawler Forums

Thread: Columbus area