07-27-2007, 06:59 PM | #1 |
Rock Crawler Join Date: Jun 2007 Location: oVER ThErE
Posts: 600
| WK Transmission size
I am building a tuber for my son. Can someone tell me the size of the WK stock tranny. I really need the width. TIA
|
Sponsored Links | |
07-27-2007, 07:29 PM | #2 |
Rock Crawler Join Date: Jan 2007 Location: Midway
Posts: 836
|
I think you have asked this question before and it was answered. But anyway I found this for you. Weird how you have 34 post each time though. Transmission size? |
07-27-2007, 07:39 PM | #3 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
|
Save this file and print it full scale, DO NOT CLICK FIT TO PAGE. I am not 100% that it will be perfect, but double check it with the other post you started and you should get a pretty good idea. This of course does not have a motor plate on it. You can find the template I made previously however to clock the motor 90* to the side. |
07-27-2007, 07:51 PM | #4 | |
Rock Crawler Join Date: Jun 2007 Location: oVER ThErE
Posts: 600
| Quote:
I forgot all about this...I am such a J _ _ K _ $ $ ... Boy I feel dumb.. Thanks | |
07-27-2007, 08:09 PM | #5 |
Rock Crawler Join Date: Jan 2007 Location: Midway
Posts: 836
|
Just the tranny is 2" wide outside of mounting post to outside of mounting post. And 2 1/2" long or tall. With motor mount in the stock position the tranny and motor mount all measures 4 3/4" bottom to top. With the 90*degree mount it measures 3 3/4" side to side and 3" top to bottom. Note: Depending on what spur gear you use these measurements can change some for the spur gear. I used a 32 pitch 72 tooth spur gear and had to use a 1/4" spacer under the tranny to make the spur gear clear the skid plate with the 90 degree motor mount and the tranny mounted on it's side. |
| |