RCCrawler Forums

kid rock · 01-16-2010, 08:44 AM

well if you gont have a crawler bring some money im thinking about selling my berg . ill bring my slash w/me also maybe we can have some fun indoors w/them ?

DanBerb · 01-16-2010, 08:52 AM

Sounds good but your going to have to help me out. Whats a berg?

Bart bender · 01-16-2010, 09:41 AM

I'm bringin a bunch of spare schtuff I dont use so maybe we can make it into a swap meet too

A Berg is a MOA(motor on axle) rig. They are one of the top contenders for the cheaters

that use that unconventional style rig. Big boys like their shafts, and some people like to get rid of their's

Seriously though they really do crawl like mad with that low CG. You'll see him do things nobody else can(cough-unfortunately)

kid rock · 01-16-2010, 09:46 AM

no prob, a berg is a motor on axle crawler very durable crawles like a mountain goat i would post a picture but you will see it tom . if you cant go let me know and ill send you some pics . thnx

Bubba73 · 01-16-2010, 04:57 PM

Just left midamerica. They had 50 or so people racing there today it was pretty cool. Looks like were ready for tomorrow, bills gonna stop by if possible but I'm gonna grab some pictures of the rigs, and crawling for fb and or web site. See ya all tomorrow.

Cole82 · 01-16-2010, 05:55 PM

Hey PM your FB and I'll friend you.

Haven't started on the crawler yet was too busy today. Tomarrow will fix it. Will be easy fix though.

Bart bender · 01-16-2010, 07:03 PM

Been packing and prepping all day off and on. Ready to rock

Cole82 · 01-16-2010, 07:08 PM

Yep just reglued my rims together, switched rear axles, glued two hexes in rims that spun. The upper links need replaced on the rear but don't want to do that tonight.

Eric what are you bringing down? I almost bought one of those 4x4 slashes what ever they are called. Also got my charger/lipo battery thing figured out. I needed an inline balencer for it. Had to order it, they had one earlier in the week but it sold this week. So I will be running old batteries this run not the new lipo's.

Cole

Bubba73 · 01-16-2010, 07:17 PM

Been soldering new deans pins, and gathering extras for trading or selling. Micro swap meet. Packing everything now.

Cole82 · 01-16-2010, 08:27 PM

Swap meet now huh, I need to rent a U-hual.

Might be a dumb question as I have only been to mid america twice but are there any chairs? I am recovering from a broken foot, if I stand too long my foot swells up.

mpmackenna · 01-16-2010, 08:30 PM

My servo didn't arrive today. If anyone has a extra metal gear servo I would like to borrow one or maybe buy one if the price is right. See ya tomorrow, Mike

Cole82 · 01-16-2010, 08:47 PM

Yeah I can bring 3 or 4 for you to choose from.

Bubba73 · 01-16-2010, 09:06 PM

Bringing my brand new Jr racing Z590M pulled it outa my nc never been used brand new 38.00 sell for 25.00. And yep got plenty chairs got some right by the track.

Quote:

Originally Posted by mpmackenna

My servo didn't arrive today. If anyone has a extra metal gear servo I would like to borrow one or maybe buy one if the price is right. See ya tomorrow, Mike

Cole82 · 01-17-2010, 07:27 AM

Thanks bubba.

Fixed it just got it done. Drove it around the living room, crawled up my wall and work boots. I think this is the first GTG I have precharged batteries, had to cycle most all of them to take a charge. That is why I said I needed new batts.

mpmackenna · 01-17-2010, 08:27 AM

Quote:

Originally Posted by Cole82

Yeah I can bring 3 or 4 for you to choose from.

Quote:

Originally Posted by Bubba73

Bringing my brand new Jr racing Z590M pulled it outa my nc never been used brand new 38.00 sell for 25.00. And yep got plenty chairs got some right by the track.

Thanks guys! Mike

Bart bender · 01-17-2010, 08:28 AM

I have a HS7955TG I would like someone to try regardless if they buy it or not. It's make my junk glitch. Anyone no how to use a programmer? I have the Hitec HPP-21 Plus and I have no idea what half of the stuff means in the instructions.

See ya'll at NOON

mpmackenna · 01-17-2010, 08:37 AM

Quote:

Originally Posted by Bart bender

I have a HS7955TG I would like someone to try regardless if they buy it or not. It's make my junk glitch. Anyone no how to use a programmer? I have the Hitec HPP-21 Plus and I have no idea what half of the stuff means in the instructions.

See ya'll at NOON

I would be happy to try it out for you. I am not sure it would be a good test though. My radio/receiver is acting suspect lately. My esc and motor are new though. If you think the issue has to do with your ESC you are welcome to hook up your servo and receiver to my ESC and test. Mike

PS That is the servo I have on order. I hear it's a nice one.

Bubba73 · 01-17-2010, 09:11 AM

Hey bart larry from custom hose is comming hell be able to figure out your programer with no prob I bet ya. He's a frickin wiz with that kinda stuff.

Bart bender · 01-17-2010, 09:55 AM

Killer guys

Gad damn is it Noon yet

mpmackenna · 01-17-2010, 04:02 PM

I was there... from about 12:00 to 1:30. Unfortunately I never even got my Creeper out of the trunk. I spent the whole time helping my kids with the Losi Mini T I bought them today at the shop. Maybe next time I will actually get to do some crawling. I did see quite a few guys running their crawlers. Looked like a good turn out. Mike

01-16-2010, 08:30 PM	#51
mpmackenna Pebble Pounder Join Date: Dec 2009 Location: Bettendorf Posts: 116	Servo My servo didn't arrive today. If anyone has a extra metal gear servo I would like to borrow one or maybe buy one if the price is right. See ya tomorrow, Mike

01-17-2010, 04:02 PM	#60
mpmackenna Pebble Pounder Join Date: Dec 2009 Location: Bettendorf Posts: 116	Midamerica hobbies I was there... from about 12:00 to 1:30. Unfortunately I never even got my Creeper out of the trunk. I spent the whole time helping my kids with the Losi Mini T I bought them today at the shop. Maybe next time I will actually get to do some crawling. I did see quite a few guys running their crawlers. Looked like a good turn out. Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-16-2010, 08:44 AM	#41
kid rock Quarry Creeper Join Date: Sep 2007 Location: Looking for rock piles Posts: 204	well if you gont have a crawler bring some money im thinking about selling my berg . ill bring my slash w/me also maybe we can have some fun indoors w/them ?

01-16-2010, 08:52 AM	#42
DanBerb Newbie Join Date: Jan 2010 Location: Luzerne Posts: 3	Sounds good but your going to have to help me out. Whats a berg?

01-16-2010, 09:41 AM	#43
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	I'm bringin a bunch of spare schtuff I dont use so maybe we can make it into a swap meet too A Berg is a MOA(motor on axle) rig. They are one of the top contenders for the cheaters that use that unconventional style rig. Big boys like their shafts, and some people like to get rid of their's Seriously though they really do crawl like mad with that low CG. You'll see him do things nobody else can(cough-unfortunately)

01-16-2010, 09:46 AM	#44
kid rock Quarry Creeper Join Date: Sep 2007 Location: Looking for rock piles Posts: 204	no prob, a berg is a motor on axle crawler very durable crawles like a mountain goat i would post a picture but you will see it tom . if you cant go let me know and ill send you some pics . thnx

01-16-2010, 04:57 PM	#45
Bubba73 Pebble Pounder Join Date: Nov 2008 Location: ely Posts: 144	Just left midamerica. They had 50 or so people racing there today it was pretty cool. Looks like were ready for tomorrow, bills gonna stop by if possible but I'm gonna grab some pictures of the rigs, and crawling for fb and or web site. See ya all tomorrow.

01-16-2010, 05:55 PM	#46
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Hey PM your FB and I'll friend you. Haven't started on the crawler yet was too busy today. Tomarrow will fix it. Will be easy fix though.

01-16-2010, 07:03 PM	#47
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Been packing and prepping all day off and on. Ready to rock

01-16-2010, 07:08 PM	#48
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Yep just reglued my rims together, switched rear axles, glued two hexes in rims that spun. The upper links need replaced on the rear but don't want to do that tonight. Eric what are you bringing down? I almost bought one of those 4x4 slashes what ever they are called. Also got my charger/lipo battery thing figured out. I needed an inline balencer for it. Had to order it, they had one earlier in the week but it sold this week. So I will be running old batteries this run not the new lipo's. Cole

01-16-2010, 07:17 PM	#49
Bubba73 Pebble Pounder Join Date: Nov 2008 Location: ely Posts: 144	Been soldering new deans pins, and gathering extras for trading or selling. Micro swap meet. Packing everything now.

01-16-2010, 08:27 PM	#50
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Swap meet now huh, I need to rent a U-hual. Might be a dumb question as I have only been to mid america twice but are there any chairs? I am recovering from a broken foot, if I stand too long my foot swells up.

Sponsored Links

01-16-2010, 08:47 PM	#52
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Yeah I can bring 3 or 4 for you to choose from.

01-17-2010, 07:27 AM	#54
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Thanks bubba. Fixed it just got it done. Drove it around the living room, crawled up my wall and work boots. I think this is the first GTG I have precharged batteries, had to cycle most all of them to take a charge. That is why I said I needed new batts.

01-17-2010, 08:28 AM	#56
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	I have a HS7955TG I would like someone to try regardless if they buy it or not. It's make my junk glitch. Anyone no how to use a programmer? I have the Hitec HPP-21 Plus and I have no idea what half of the stuff means in the instructions. See ya'll at NOON

01-17-2010, 09:11 AM	#58
Bubba73 Pebble Pounder Join Date: Nov 2008 Location: ely Posts: 144	Hey bart larry from custom hose is comming hell be able to figure out your programer with no prob I bet ya. He's a frickin wiz with that kinda stuff.

01-17-2010, 09:55 AM	#59
Bart bender I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state! Posts: 2,227	Killer guys Gad damn is it Noon yet

RCCrawler Forums

Thread: Winter 09-2010 indoor crawling.