Go Back   RCCrawler Forums > Scale Rigs General Tech > Large Scale Rigs
Loading

Notices

Thread: SCX-6 3d Part Help

Reply
 
LinkBack Thread Tools Display Modes
Old 12-19-2021, 05:27 PM   #1
Quarry Creeper
 
Join Date: Mar 2020
Location: Las Vegas
Posts: 264
Default SCX-6 3d Part Help

Has anyone come up with an ESC mount that sits on top of the transmission and ties into the three large bolts running down from the top?



I want to get a 3d printed tray where I can mount the ESC and receiver above the transmission, and then use the spot next to the servo for mounting the battery.



Thanks!
SteveB1 is offline   Reply With Quote
Sponsored Links
Old 12-19-2021, 08:38 PM   #2
Tiny Truck Hoarder
 
HumboldtEF's Avatar
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,251
Default Re: SCX-6 3d Part Help

Probably not what you need but I came up with a front battery mount that doesnt require moving the ESC but it wasnt intended to be the main battery, just a small (shorty) servo battery. https://www.thingiverse.com/thing:5141653

Also have you thought about mounting the ESC on the side trays? The stock ESC isnt that heavy.

EDIT: I just took a look and even with the ESC being small I have a feeling there isn't enough room for it on top of the tranny with the stock body and interior. I crammed a 35mm tall box inside and it was touching interior.

Last edited by HumboldtEF; 12-19-2021 at 08:46 PM.
HumboldtEF is offline   Reply With Quote
Old 12-19-2021, 09:20 PM   #3
Quarry Creeper
 
Join Date: Mar 2020
Location: Las Vegas
Posts: 264
Default Re: SCX-6 3d Part Help

Greetings,



I was measuring that as well, it would be close. I don't feel the ESC needs a fan for crawling, and cutting a small hole in the middle of the interior would allow for space, but I also agree that some measurements would be a good thing to see if I can just mount on the side board and make the connector reach the battery. Should work I think , and a better option.


I'll check it out. Thanks!



s
SteveB1 is offline   Reply With Quote
Reply



SCX-6 3d Part Help - Similar Threads
Thread Thread Starter Forum Replies Last Post
Convert a SCX-kit or SCX-TR into Honcho w/ part #s neoakaj Axial SCX-10 0 12-23-2009 09:32 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com