12-19-2021, 05:27 PM | #1 |
Quarry Creeper Join Date: Mar 2020 Location: Las Vegas
Posts: 356
| SCX-6 3d Part Help
Has anyone come up with an ESC mount that sits on top of the transmission and ties into the three large bolts running down from the top? I want to get a 3d printed tray where I can mount the ESC and receiver above the transmission, and then use the spot next to the servo for mounting the battery. Thanks! |
Sponsored Links | |
12-19-2021, 08:38 PM | #2 |
I wanna be Dave Join Date: Jun 2017 Location: Humboldt county
Posts: 4,482
| Re: SCX-6 3d Part Help
Probably not what you need but I came up with a front battery mount that doesnt require moving the ESC but it wasnt intended to be the main battery, just a small (shorty) servo battery. https://www.thingiverse.com/thing:5141653 Also have you thought about mounting the ESC on the side trays? The stock ESC isnt that heavy. EDIT: I just took a look and even with the ESC being small I have a feeling there isn't enough room for it on top of the tranny with the stock body and interior. I crammed a 35mm tall box inside and it was touching interior. Last edited by HumboldtEF; 12-19-2021 at 08:46 PM. |
12-19-2021, 09:20 PM | #3 |
Quarry Creeper Join Date: Mar 2020 Location: Las Vegas
Posts: 356
| Re: SCX-6 3d Part Help
Greetings, I was measuring that as well, it would be close. I don't feel the ESC needs a fan for crawling, and cutting a small hole in the middle of the interior would allow for space, but I also agree that some measurements would be a good thing to see if I can just mount on the side board and make the connector reach the battery. Should work I think , and a better option. I'll check it out. Thanks! s |
SCX-6 3d Part Help - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Convert a SCX-kit or SCX-TR into Honcho w/ part #s | neoakaj | Axial SCX-10 | 0 | 12-23-2009 09:32 PM |
| |