New 2-56 scale hardware!

[j-bird]

Just like said before I need 72 so I would have to buy two bags of 70.. I'm def in on bags of 20 would be nice but whatever you decide I guess I'll buy

[Locked Up]

Originally Posted by monkeyracer

Count me in if you can do bags of 35. I'm not as worried about the color, although with the regrinds it definitely changes the look. As I am typing this I am thinking that I'd probably do 140 anyway because I'd use the bolts for the metalhead axles diff cover, but it would be nice to have smaller quantities anyway.

I went ahead and sorted these to be in bags of 35 for yall.

[Die-Laughing]

Order placed

I was kind of in a weird quantity situation myself.. I have 5 wheels.. 16 screws per wheel face = 80pcs total.

The 35pc packs helped me out a little. I would of had to order 140pcs with the 70pc packs and only use 80pcs. Instead I ordered 3 packs of 35pcs to get the 80pcs I needed and I'll have some extras for whatever I want to use them on.

I measured my Mahem 1.9 screws at 6mm long but, I threaded one into the wheel without the beadlock ring and it went all the way in. Your 7mm length should be perfect.

[j-bird]

Am I wrong or is my memory foggy? I thought the bags of 70 was 9$ now I see the bags of 35 for the same price.. Is this correct or did I smoke too much when I was young ;)

[Locked Up]

Originally Posted by j-bird

Am I wrong or is my memory foggy? I thought the bags of 70 was 9$ now I see the bags of 35 for the same price.. Is this correct or did I smoke too much when I was young ;)

Too much smoke!
They were $17.50 before I split them up.


And just so yall know...
The additional .25 per bag is for the additional ziploc, paypal transaction fee (for selling each bag) and many, many hours it took me to count these out by hand!

[j-bird]

Lol alright my bad.. I agree sorting those would be a pain in the rear for sure bro.. I thought you had some 2-56 acorn screws that was 7mm long. I need some scale hex and scale acorns for my regrinds

[Locked Up]

Originally Posted by j-bird

Lol alright my bad.. I agree sorting those would be a pain in the rear for sure bro.. I thought you had some 2-56 acorn screws that was 7mm long. I need some scale hex and scale acorns for my regrinds

No worries.

I will have some 2-56 Acorns "soon" ...

[monkeyracer]

Originally Posted by Locked Up

No worries.

I will have some 2-56 Acorns "soon" ...

I'm definitely in for the acorns, and I as well would use them for the regrinds and the switchbacks I have. I'll be making an order as soon as they are ready.

[greenjk]

Has any one used these on axial plastic wheels, I've got a few sets of the 1.9s with mthead rings and would love the look of these if the work, also do you ship to Australia.

[monkeyracer]

Originally Posted by greenjk

Has any one used these on axial plastic wheels, I've got a few sets of the 1.9s with mthead rings and would love the look of these if the work, also do you ship to Australia.

I haven't used these specific bolts on the axial 1.9's, but I've got 2-56 screws on my Axial 1.9s with MTHead rings. MTHead actually recommends the 2-56 since it has a little more bite in the thread, leading to a better holding (less likely to strip) upgrade. Now, if LURC would offer 3mm long bolts for the rings with more than 6 holes... I'm going to go broke.

[Erbing]

Originally Posted by greenjk

Has any one used these on axial plastic wheels, I've got a few sets of the 1.9s with mthead rings and would love the look of these if the work, also do you ship to Australia.

I have them mounted on axial 8 holes with locked up rc rings, they look good.