03-22-2010, 03:51 PM | #301 |
Rock Crawler Join Date: Jul 2008 Location: gilbert
Posts: 613
|
Just got it put together and running. |
Sponsored Links | |
04-07-2010, 04:55 AM | #302 |
Quarry Creeper Join Date: Feb 2009 Location: Rockaway
Posts: 489
|
my mrc/gc3 chasis |
04-07-2010, 10:30 PM | #303 |
Newbie Join Date: Dec 2007 Location: Hanford
Posts: 44
| New blue rig
This is my new MINI traded my slash for it great deal full steel lockers all the way around aluminum links every were 1/10 steering servo and aluminum hot racing shocks installed. RC4wd tires and beadlock wheel mod weights in front rims. |
04-10-2010, 11:34 PM | #304 |
Pebble Pounder Join Date: Mar 2010 Location: Corona
Posts: 117
|
Figured id throw up some pics of my mrc. Upgrades Proline weighted bead locks full front half in rear Losi high clearance links front + rear 3racing skid plate GPM upper links Proline Flat iron tires Metal lockers front center rear 2s Lipo/w novak smart stop LVC As-2 servo out of an axial scorpion upgraded Losi mrc shocks with mini t springs and of course the usual free "upgrades" |
04-15-2010, 06:13 PM | #305 |
Pebble Pounder Join Date: Mar 2010 Location: Sarasota
Posts: 122
|
Mine... GC3 HH TMm Sidewinder Micro Rovers on DNA Assassins Etc, etc... |
04-16-2010, 10:55 PM | #306 |
Rock Stacker Join Date: Feb 2010 Location: Redwood City
Posts: 49
|
here are a few shots of mine, been messing with some glue on weights, lowered the body, move the batt to the back. since then I have now added them to the inside of the wheel, just pick up a set of proline titus + flat irons, but i think they are too big. still looking for a nice ballance Last edited by Kitebug; 04-16-2010 at 11:01 PM. |
04-19-2010, 07:15 PM | #307 |
I wanna be Dave Join Date: Jul 2005 Location: North Idaho
Posts: 3,648
|
My Silver Bullet... |
04-20-2010, 09:18 AM | #308 |
Rock Stacker Join Date: May 2006 Location: Ellijay Ga
Posts: 68
|
A little lead in the wheels but pretty stock and tall for now. |
04-23-2010, 08:55 PM | #309 |
Pebble Pounder Join Date: Apr 2010 Location: topeka
Posts: 117
|
proline blazer body proline 1.9 flat iron g-8 proline titus w/2.0 oz. ea. losi aluminum shocks hi-tech 645 losi 30 degree lower links integy center drive shafts (blue) integy steering links (blue) losi metal center locker losi metal frt/rear locker http://s245.photobucket.com/albums/g...ock%20crawler/ Last edited by gofaster427; 04-23-2010 at 08:58 PM. |
04-24-2010, 12:52 PM | #310 |
Rock Stacker Join Date: Mar 2010 Location: Norway
Posts: 98
|
Finally finished mine - DMG Nat V3 chassis - thanks Zorlac! - Xcelorin Sensored motor/ESC - Rovers/Axial 1.9 beadlocks - CC 10A BEC - RCBros delrin links & 4 link servo/battery plate - Losi leaky shocks - MIP center drive |
04-25-2010, 07:20 PM | #311 |
Pebble Pounder Join Date: Nov 2009 Location: Jacksonville
Posts: 124
| |
04-26-2010, 08:09 PM | #312 |
Newbie Join Date: Feb 2010 Location: Colorado
Posts: 13
|
Just got a grappler body. Nothing special. Mods are -Losi Grappler Lid -Skulz v2 chassis -Axial 8 hole beadlocks -Proline Chisels -Lowered CG w/ electronics -Front C/F mount w/ lipo -RcBros rear electronics mount that's it for now. I need new body mounts because I kinda broke three of them when it got dropped. |
04-30-2010, 09:55 AM | #313 |
Newbie Join Date: Feb 2010 Location: Northern Ireland
Posts: 33
| |
05-04-2010, 10:08 PM | #314 |
Newbie Join Date: Mar 2010 Location: Australia
Posts: 5
| |
05-07-2010, 01:28 PM | #315 |
Quarry Creeper Join Date: Mar 2010 Location: Yay Area
Posts: 432
| imgur kicks but for posting picts!
Here is my Mini crawler. Upgrades: RCBros Skulz V2 chassis Losi Ti threaded shocks Proline Titus wheels w/ HB Rovers 3Racing alum front spindles/alum C's 3Racing alum rear hubs 3Racing bent links 3Racing alum alum skid PowerHD 9001MG servo 2s lipo Spektrum DX3.0 Last edited by el_Fernando; 06-28-2010 at 12:45 PM. |
05-09-2010, 03:00 PM | #316 |
Pebble Pounder Join Date: Jul 2005 Location: Warrington, UK
Posts: 117
|
Here are my modded truck and my missus' stock truck from our run today. |
05-13-2010, 08:53 AM | #317 |
Pebble Pounder Join Date: Nov 2009 Location: Jacksonville
Posts: 124
| |
05-19-2010, 09:11 PM | #318 |
Newbie Join Date: May 2010 Location: Fremont
Posts: 10
|
im in awe of all the cool mods people are doing to their trucks.... all i have done is add the wheel weights for the aluminum rims, which meant i had to put each tire in the lathe and remove a bit of plastic from the rims then they fit just fine with some tape to hold them in place:-) it made a world of difference i use my little crawler to entertain my 10 month old baby and crawl over all his crap thats always all over the floor as you can see |
05-26-2010, 11:04 PM | #319 |
Newbie Join Date: May 2010 Location: Maineville
Posts: 1
|
This is my crawler: GC-3 Chassis Rovers (Reds) Pro line titus 1.9s weighted fronts Novak Mongoose brushless system MIP C-Drives Losi 1 piece rear axles Losi Alum Wheel Hex set Losi Steel lockers all the way around Losi Alum front carriers Losi Alum spindles Losi front CVD's Thunder power 3 cell lipo 730 mah ( not pictured) |
05-26-2010, 11:47 PM | #320 |
Pebble Pounder Join Date: Feb 2005 Location: Chandler, AZ
Posts: 110
| 645MG 4link F/R Hand wound outrunner with 104:1 planetary reduction Aluminum 1:1 transfer case with steel gears 3S 480 mAh lipo Mamba micro pro 1/8" brass frame |
| |